Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Carbide tipped cutting tools are manufactured by powder metallurgy
techniques and have a composition of
(A) 90% tungsten carbide and 10% cobalt
(B) 70% aluminium oxide & 30% silica
(C) 30% nickel, 15% chromium & 55% tungsten
(D) 65% tungsten & 35% zirconium
by

1 Answer

Answer :

Option A
by

Related questions

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Last Answer : Option B

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Last Answer : Option B

Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Last Answer : Option A

Which of the following can be manufactured using powder metallurgy techniques? (A) Brake linings (B) Bearings (C) Carbide tool tips (D) All 'a', 'b' and 'c'

Description : Which of the following can be manufactured using powder metallurgy techniques? (A) Brake linings (B) Bearings (C) Carbide tool tips (D) All 'a', 'b' and 'c'

Last Answer : (D) All 'a', 'b' and 'c'

Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Last Answer : (B) Cobalt, chromium & tungsten

Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Last Answer : (B) Cobalt, chromium and tungsten

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B

Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Last Answer : (B) Cobalt

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

How much percentage of inorganic material is contained in bones. a. 35% b. 45% c. 55% d. 65%

Description : How much percentage of inorganic material is contained in bones. a. 35% b. 45% c. 55% d. 65%

Last Answer : 65%

The main constituent of permalloy is (a) cobalt (b) chromium (c) nickel (d) tungsten

Description : The main constituent of permalloy is (a) cobalt (b) chromium (c) nickel (d) tungsten

Last Answer : (c) nickel

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

Living cell contains 60 – 95% water. Water present in human body is(a) 60 – 65% (b) 50 – 55% (c) 75 – 80% (d) 65 – 70%.

Description : Living cell contains 60 – 95% water. Water present in human body is (a) 60 – 65% (b) 50 – 55% (c) 75 – 80% (d) 65 – 70%.

Last Answer : (d) 65 – 70%.

Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Description : Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Last Answer : (A) Inconel

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

Bronze is an alloy of copper, zinc , and tin having composition (A) 60% - 30% - 10% (B) 70% - 20% - 10% (C) 88% - 2% - 10% (D) 50% -30% - 20%

Description : Bronze is an alloy of copper, zinc , and tin having composition (A) 60% - 30% - 10% (B) 70% - 20% - 10% (C) 88% - 2% - 10% (D) 50% -30% - 20%

Last Answer : (C) 88% - 2% - 10%

Which one of the following elements is essential for the construction of nuclear reactors? (1) Cobalt (2) Nicke (3) Zirconium (4) Tungsten

Description : Which one of the following elements is essential for the construction of nuclear reactors? (1) Cobalt (2) Nicke (3) Zirconium (4) Tungsten

Last Answer : (3) Zirconium Explanation: Zirconium is an essential element for the construction of nuclear reactors.

Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

__________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico

Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico

Last Answer : Option A

Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Description : Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Last Answer : (A) Tin, nickel, iron and chromium

Thermal of well-maintained boiler will be of the order ______ a. 30% b. 55% c. 90% d. 45%

Description : Thermal of well-maintained boiler will be of the order ______ a. 30% b. 55% c. 90% d. 45%

Last Answer : c. 90%

Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Description : Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Last Answer : b.35% - 40%

Permanent magnets are made of high carbon steel and (A) 15% of cobalt (B) 20% of cobalt (C) 35% of cobalt (D) 45% of cobalt

Description : Permanent magnets are made of high carbon steel and (A) 15% of cobalt (B) 20% of cobalt (C) 35% of cobalt (D) 45% of cobalt

Last Answer : Answer: Option D

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

__________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (D) Molybdenum

__________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (C) Cobalt

Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite

Description : Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite

Last Answer : Option B

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Description : Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Last Answer : D. 80% to 90%

We've always known that smoking is terrible for our health, yet until quite recently at least 35% of American adults smoked. What turned that figure to approximately 15% (CDC figures for 2015) and in some communities, down to 10%?

Description : We've always known that smoking is terrible for our health, yet until quite recently at least 35% of American adults smoked. What turned that figure to approximately 15% (CDC figures for 2015) and in some communities, down to 10%?

Last Answer : Ten bucks a pack along with relegation of smokers to the status of lepers.

What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Description : What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Last Answer : c. 10 - 15% carbamide peroxide

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

If a company has net sales of $500,000 and cost of goods sold of $350,000, the gross profit percentage is a. 70%. b. 30%. c. 15%. d. 100%.

Description : If a company has net sales of $500,000 and cost of goods sold of $350,000, the gross profit percentage is a. 70%. b. 30%. c. 15%. d. 100%.

Last Answer : b. 30%

Stainless steel is welded with difficulty because of (A) Its high melting temperature (B) Chances of cracking (C) Oxide film formation (D) Chromium carbide formation

Description : Stainless steel is welded with difficulty because of (A) Its high melting temperature (B) Chances of cracking (C) Oxide film formation (D) Chromium carbide formation

Last Answer : Option C

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Description : The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Last Answer : (B) Tungsten

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.

Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : (3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to ... percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.

For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these

Description : For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these

Last Answer : Answer: Option A

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Last Answer : Tungsten

Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : Nichrome

If a double stranded DNA has 20% Thymine, the percentage of Guanine in the DNA a) 30% b) 10% c) 90% d) 40%

Description : If a double stranded DNA has 20% Thymine, the percentage of Guanine in the DNA a) 30% b) 10% c) 90% d) 40%

Last Answer : a) 30%

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Description : Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Last Answer : Following are the suggestion the energy conservation techniques in following cases :  (i) Motor is running with 70% loaded condition: Use APFC or IPFC for better power factor improvement. Use ... If possible use low capacity motor for above condition. If possible switch off the motor.

What percentage of world's freshwater is stored as glacial ice? (1) 50% (2) 10% (3) 70% (4) 30%

Description : What percentage of world's freshwater is stored as glacial ice? (1) 50% (2) 10% (3) 70% (4) 30%

Last Answer : (3) 70% Explanation: About 70% of the world's fresh water is stored as glacial ice. Only 3% water of the earth is fresh, rest 97% salted. Of that 3%, over 2% is frozen in ice sheets and glaciers. Means less than 1% fresh water is found in lakes, rivers and underground.

What percentage of world’s freshwater is stored as glacial ice ? (1) 50% (2) 10% (3) 70% (4) 30%

Description : What percentage of world’s freshwater is stored as glacial ice ? (1) 50% (2) 10% (3) 70% (4) 30%

Last Answer : 70%

hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Last Answer : Option C

Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal and 10% sulphur (C) Lead azide is a popular military explosive (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Description : Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal ... TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Last Answer : (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being