If f = moles of vapour present per mole of feed, then the slope of feed line is (McCabe-Thiele method) (A) (1 - f)/f (B) - (f - 1)/f (C) -1/f (D) -f/(1 - f)

If f = moles of vapour present per mole of feed, then the slope of feed
line is (McCabe-Thiele method)
(A) (1 - f)/f
(B) - (f - 1)/f
(C) -1/f
(D) -f/(1 - f)
by

1 Answer

Answer :

(C) -1/f
by

Related questions

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

McCabe-Thiele method (A) Uses molal units for material and energy balance (B) Uses weight fractions to express liquid and vapour composition (C) Can use any type of units (D) Is more accurate than Ponchon-Savarit method

Description : McCabe-Thiele method (A) Uses molal units for material and energy balance (B) Uses weight fractions to express liquid and vapour composition (C) Can use any type of units (D) Is more accurate than Ponchon-Savarit method

Last Answer : (A) Uses molal units for material and energy balance

In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent heat of vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Description : In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent ... vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Last Answer : (D) A total condenser is used

In a binary distillation column, if the feed contains 40 mole % vapour, the q line will have a slope of (A) 1.5 (B) -0.6 (C) -1.5 (D) 0.6

Description : In a binary distillation column, if the feed contains 40 mole % vapour, the q line will have a slope of (A) 1.5 (B) -0.6 (C) -1.5 (D) 0.6

Last Answer : (C) -1.5

McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Description : McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Last Answer : (D) None of these

In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Description : In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Last Answer : (A) Total

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) The overhead product is minimum

Which of the following assumes constant molal vaporisation and overflow?(A) McCabe-Thiele method (B) Ponchan-Savarit method (C) Enthalpy concentration method (D) Plate absorption column

Description : Which of the following assumes constant molal vaporisation and overflow? (A) McCabe-Thiele method (B) Ponchan-Savarit method (C) Enthalpy concentration method (D) Plate absorption column

Last Answer : (A) McCabe-Thiele method

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Description : In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Last Answer : (C) Both the operating lines coincide with the diagram

Design calculation for multiple component distillation is done by (A) Ponchon-Savarit method (B) McCabe-Thiele method (C) Enthalpy concentration method (D) Tray to tray calculations

Description : Design calculation for multiple component distillation is done by (A) Ponchon-Savarit method (B) McCabe-Thiele method (C) Enthalpy concentration method (D) Tray to tray calculations

Last Answer : (D) Tray to tray calculations

In distillation where q is defined as the moles of liquid flow in the stripping section per mole of feed introduced, for saturated liquid feed (A) q > 1 (B) q < 1 (C) q = 1 (D) q = 0

Description : In distillation where q is defined as the moles of liquid flow in the stripping section per mole of feed introduced, for saturated liquid feed (A) q > 1 (B) q < 1 (C) q = 1 (D) q = 0

Last Answer : (C) q = 1

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

`NH_(3) + NaOCl overset("golatin or " EDTA^(+))rarr` products The number of moles of `N - H` bonds present in one mole of the strongest nucleophile pr

Description : `NH_(3) + NaOCl overset("golatin or " EDTA^(+))rarr` products The number of moles of `N - H` bonds present in one mole of the strongest nucleophile pr

Last Answer : `NH_(3) + NaOCl overset("golatin or " EDTA^(+))rarr` products The number of moles of ... mole of the strongest nucleophile present in the product is:

`NH_(3) + NaOCl overset("golatin or " EDTA^(+))rarr` products The number of moles of `N - H` bonds present in one mole of the strongest nucleophile pr

Description : `NH_(3) + NaOCl overset("golatin or " EDTA^(+))rarr` products The number of moles of `N - H` bonds present in one mole of the strongest nucleophile pr

Last Answer : `NH_(3) + NaOCl overset("golatin or " EDTA^(+))rarr` products The number of moles of ... mole of the strongest nucleophile present in the product is:

When a coordination compound CoCl3.6NH3 is mixed with AgNO3, 3 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex (ii) IUPAC name of the complex -Chemistry

Description : When a coordination compound CoCl3.6NH3 is mixed with AgNO3, 3 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex (ii) IUPAC name of the complex -Chemistry

Last Answer : i) Complex so formed is: CoCl3.6NH3 + AgNO3 → [Co(NH3)6]Cl3 (ii) IUPAC name of complex is: Hexaamminecobalt (III) chloride

When a co-ordination compound CrCl3.6H2O is mixed with AgNO3, 2 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex. (ii) IUPAC name of the complex. -Chemistry

Description : When a co-ordination compound CrCl3.6H2O is mixed with AgNO3, 2 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex. (ii) IUPAC name of the complex. -Chemistry

Last Answer : (i) The complex formed on mixing a coordination compound CrCl3.6H2O with AgNO3 is as follows CrCl3.6H2O + AgNO3 → [Cr(H2O5)Cl]Cl2. H2O (ii) Pentaaquachloridochromium (III) chloride monohydrate

In the hofmann-bromamide degradation reaction, the number of moles of NaOH and `Br_(2)` used per mole of amine produced are

Description : In the hofmann-bromamide degradation reaction, the number of moles of NaOH and `Br_(2)` used per mole of amine produced are

Last Answer : In the hofmann-bromamide degradation reaction, the number of moles of NaOH and `Br_(2)` used per mole of ... moles of NaOH and one mole of `Br_(2)`

The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling? (A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Description : The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of ... A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Last Answer : (B) Gas side

On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Description : On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Last Answer : (C) Increased reflux ratio

The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Description : The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Last Answer : (C) -ve

Which of the following is not a unit of mass transfer co-efficient? (A) Moles transferred/ [(time) (area) (mole fraction)] (B) Moles transferred/ [(time) (area) (mass A/mass B)] (C) Moles transferred/ [(time) (area) (pressure)] (D) None of these

Description : Which of the following is not a unit of mass transfer co-efficient? (A) Moles transferred/ [(time) (area) (mole fraction)] (B) Moles transferred/ [(time) (area) (mass A/mass B)] (C) Moles transferred/ [(time) (area) (pressure)] (D) None of these

Last Answer : (D) None of these

What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Description : What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Last Answer : (A) Litre/mole.second

For the reversible reaction A ⇌ 2B, if the equilibrium constant K is 0.05 mole/litre; starting from initially 2 moles of A and zero moles of B, how many moles will be formed at equilibrium? (A) 0.253 (B) 0.338 (C) 0.152 (D) 0.637

Description : For the reversible reaction A ⇌ 2B, if the equilibrium constant K is 0.05 mole/litre; starting from initially 2 moles of A and zero moles of B, how many moles will be formed at equilibrium? (A) 0.253 (B) 0.338 (C) 0.152 (D) 0.637

Last Answer : (B) 0.338

Which of the following is not a unit of reaction rate? (A) Moles for med/(surface of catalyst) (time) (B) Moles formed/volume of reactor) (time) (C) Mole formed/volume of catalyst) (time) (D) None of these

Description : Which of the following is not a unit of reaction rate? (A) Moles for med/(surface of catalyst) (time) (B) Moles formed/volume of reactor) (time) (C) Mole formed/volume of catalyst) (time) (D) None of these

Last Answer : (D) None of these

In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the same volume.(A) More than(B) Less than(C) Same as(D) Data insufficient; can't be predicted

Description : In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the ... (A) More than (B) Less than (C) Same as (D) Data insufficient; can't be predicted

Last Answer : (C) Same as

For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved at 298 K will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J

Description : For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved ... will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J

Last Answer : (C) 90,000 J

FeO (s) + CO (g) = Fe (s) + CO2 (g), k = 0. 435 at 1173E; at equilibrium, what will be the number of moles of CO gas required to reduce one mole of FeO at 1173 K? (A) 1.0 (B) 1.3 (C) 2.3 (D) 3.3

Description : FeO (s) + CO (g) = Fe (s) + CO2 (g), k = 0. 435 at 1173E; at equilibrium, what will be the number of moles of CO gas required to reduce one mole of FeO at 1173 K? (A) 1.0 (B) 1.3 (C) 2.3 (D) 3.3

Last Answer : Option D

One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) The product composition but not the fraction vaporised (B) The product composition as well as the fraction vaporised (C) The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Description : One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) ... The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Last Answer : (C) The fraction vaporised but not the product composition

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

When the feed to a distillation column is a saturated liquid, slope of thefeed line is(A) Zero(B) Unity(C) Infinity(D) None of these

Description : When the feed to a distillation column is a saturated liquid, slope of thefeed line is (A) Zero (B) Unity (C) Infinity (D) None of these

Last Answer : (C) Infinity

The slope of 9-line is determined by the (A) Reflux ratio (B) Plate efficiency to be achieved (C) Thermal condition of the feed (D) Relative volatility

Description : The slope of 9-line is determined by the (A) Reflux ratio (B) Plate efficiency to be achieved (C) Thermal condition of the feed (D) Relative volatility

Last Answer : (C) Thermal condition of the feed

If Thiele modulus is __________, then the pore diffusion resistance in a catalyst may be considered as negligible. (A) 0 (B) ∞ (C) < 0.5 (D) > 0.5

Description : If Thiele modulus is __________, then the pore diffusion resistance in a catalyst may be considered as negligible. (A) 0 (B) ∞ (C) < 0.5 (D) > 0.5

Last Answer : (C) < 0.5

Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution is proportional to the mole fraction in the vapour (C) Vapour pressure is equal to the product of the mole fraction and total pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Description : Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution ... pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Last Answer : (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid

At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole fractions of methanol are 0.1686 and 0.5714 respectively. Activity co-efficient of methanol is (A) 1.572 (B) 1.9398 (C) 3.389

Description : At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole ... respectively. Activity co-efficient of methanol is (A) 1.572 (B) 1.9398 (C) 3.389

Last Answer : (A) 1.572

For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3.Fugacity of water (in kPa) at 9000 kPa will be (A) 6738.9 (B) 6753.5 (C) 7058.3 (D) 9000

Description : For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3.Fugacity of water (in kPa) at 9000 kPa will be (A) 6738.9 (B) 6753.5 (C) 7058.3 (D) 9000

Last Answer : (B) 6753.5

Number of moles of `MnO_(4)^(-)` required to oxidise one mole of ferrous oxalate completely in acidic medium will be

Description : Number of moles of `MnO_(4)^(-)` required to oxidise one mole of ferrous oxalate completely in acidic medium will be

Last Answer : Number of moles of `MnO_(4)^(-)` required to oxidise one mole of ferrous oxalate completely in acidic medium ... .2 moles C. 0.6 moles D. 0.4 moles

5 moles of `SO_(2)` and 5 moles of `O_(2)` react in a closed vessel. At equilibrium 60% of the `SO_(2)` is consumed . The total number of gaseous mole

Description : 5 moles of `SO_(2)` and 5 moles of `O_(2)` react in a closed vessel. At equilibrium 60% of the `SO_(2)` is consumed . The total number of gaseous mole

Last Answer : 5 moles of `SO_(2)` and 5 moles of `O_(2)` react in a closed vessel. At equilibrium 60% of the `SO_(2)` is consumed ... - A. 5.1 B. 3.9 C. 10.5 D. 8.5

In the reaction , `4A+2B+3CtoA_(4)B_(2)C_(3)` what will be the number of moles of product formed , starting from 1 mole of A,06 mole of B and 0.72 mol

Description : In the reaction , `4A+2B+3CtoA_(4)B_(2)C_(3)` what will be the number of moles of product formed , starting from 1 mole of A,06 mole of B and 0.72 mol

Last Answer : In the reaction , `4A+2B+3CtoA_(4)B_(2)C_(3)` what will be the number of moles of product formed , starting from 1 ... A. 0.25 B. 0.3 C. 2.4 D. 0.24

Complete hydrolysis product of 1 mole each of following will need how many total number of moles of NaOH for complete neutralisation? `SOCl_(2), SO_(2

Description : Complete hydrolysis product of 1 mole each of following will need how many total number of moles of NaOH for complete neutralisation? `SOCl_(2), SO_(2

Last Answer : Complete hydrolysis product of 1 mole each of following will need how many total number of moles of NaOH for ... ), PCl_(3), PCl_(5), NCl_(3)`

Complete hydrolysis product of 1 mole each of following will need how many total number of moles of NaOH for complete neutralisation? `SOCl_(2), SO_(2

Description : Complete hydrolysis product of 1 mole each of following will need how many total number of moles of NaOH for complete neutralisation? `SOCl_(2), SO_(2

Last Answer : Complete hydrolysis product of 1 mole each of following will need how many total number of moles of NaOH for ... ), PCl_(3), PCl_(5), NCl_(3)`

The number of moles of `KMnO_(4)` that will be needed to react completely with one mole of ferrous oxalate in acidic solution is:

Description : The number of moles of `KMnO_(4)` that will be needed to react completely with one mole of ferrous oxalate in acidic solution is:

Last Answer : The number of moles of `KMnO_(4)` that will be needed to react completely with one mole of ferrous oxalate in acidic ... //5` C. `3//5` D. `4//5`

One mole of acidified `K_(2)Cr_(2)O_(7)` on reaction with excess of KCl will liberate….., moles of `I_(2)`.

Description : One mole of acidified `K_(2)Cr_(2)O_(7)` on reaction with excess of KCl will liberate….., moles of `I_(2)`.

Last Answer : One mole of acidified `K_(2)Cr_(2)O_(7)` on reaction with excess of KCl will liberate….., moles of `I_(2)`. A. 6 B. 1 C. 7 D. 3

The number of moles of oxalate ions oxidised by one mole of `MnO_(4)^(-)` ion in acidic medium is :

Description : The number of moles of oxalate ions oxidised by one mole of `MnO_(4)^(-)` ion in acidic medium is :

Last Answer : The number of moles of oxalate ions oxidised by one mole of `MnO_(4)^(-)` ion in acidic medium is : A. `5//2` B. `2//5` C. `3//5` D. `5//3`

One mole of complex compound `Co(NH_3)_5Cl_3` gives 3 moles of ions on dissolution in water. One mole of same complex reacts with two moles of `AgNO_3

Description : One mole of complex compound `Co(NH_3)_5Cl_3` gives 3 moles of ions on dissolution in water. One mole of same complex reacts with two moles of `AgNO_3

Last Answer : One mole of complex compound `Co(NH_3)_5Cl_3` gives 3 moles of ions on dissolution in water. One mole of same ... [Co(NH_(3))_(3)Cl_(3)].2NH_(3)`

When a mixture containing `PCl_(3)` and `PCl_(5)` is heated with ethyl alcohol, a total of 4 moles of ehtyl chloride is formed. Mole ratio of `PCl_(3)

Description : When a mixture containing `PCl_(3)` and `PCl_(5)` is heated with ethyl alcohol, a total of 4 moles of ehtyl chloride is formed. Mole ratio of `PCl_(3)

Last Answer : When a mixture containing `PCl_(3)` and `PCl_(5)` is heated with ethyl alcohol, a total of 4 moles of ehtyl chloride is ... : 1` C. `1 : 3` D. `2 : 1`

`I_(2)` produced when ozone reacts with moist KI is used to convert `C_(2)H_(5)OH` to `CI_(3)CHO`. Number of moles of ozone required to convert 1 mole

Description : `I_(2)` produced when ozone reacts with moist KI is used to convert `C_(2)H_(5)OH` to `CI_(3)CHO`. Number of moles of ozone required to convert 1 mole

Last Answer : `I_(2)` produced when ozone reacts with moist KI is used to convert `C_(2)H_(5)OH` to `CI_(3)CHO`. Number of ... CI_(3)CHO` is A. 1 B. 2 C. 4 D. 3

How many moles of ATP are obtained from oxidation of 1 mole of acetyl CoA in the common metabolic pathway?

Description : How many moles of ATP are obtained from oxidation of 1 mole of acetyl CoA in the common metabolic pathway?

Last Answer : Need answer

If 4 moles of gas are added to container that already holds 1 mole of gas the pressure inside the container due to the change in the amount of gas?

Description : If 4 moles of gas are added to container that already holds 1 mole of gas the pressure inside the container due to the change in the amount of gas?

Last Answer : 5 moles