At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole fractions of methanol are 0.1686 and 0.5714 respectively. Activity co-efficient of methanol is (A) 1.572 (B) 1.9398 (C) 3.389

At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole fractions of methanol are 0.1686 and 0.5714 respectively. Activity co-efficient of methanol is
(A) 1.572
(B) 1.9398
(C) 3.389
by

1 Answer

Answer :

(A) 1.572
by

Related questions

For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3.Fugacity of water (in kPa) at 9000 kPa will be (A) 6738.9 (B) 6753.5 (C) 7058.3 (D) 9000

Description : For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3.Fugacity of water (in kPa) at 9000 kPa will be (A) 6738.9 (B) 6753.5 (C) 7058.3 (D) 9000

Last Answer : (B) 6753.5

Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Description : Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Last Answer : (A) Departure from ideal solution behaviour

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

The pressure at a point 4 m below the free surface of water is (A) 19.24 kPa (B) 29.24 kPa (C) 39.24 kPa (D) 49.24 kPa

Description : The pressure at a point 4 m below the free surface of water is (A) 19.24 kPa (B) 29.24 kPa (C) 39.24 kPa (D) 49.24 kPa

Last Answer : Answer: Option C

Gibbs-Duhem equation relates composition in liquid phase and the __________ at constant temperature & pressure. (A) Fugacity (B) Partial pressure (C) Activity co-efficient (D) All (A), (B), and (C)

Description : Gibbs-Duhem equation relates composition in liquid phase and the __________ at constant temperature & pressure. (A) Fugacity (B) Partial pressure (C) Activity co-efficient (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution is proportional to the mole fraction in the vapour (C) Vapour pressure is equal to the product of the mole fraction and total pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Description : Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution ... pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Last Answer : (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure becomes 2.9 kPa at 298 K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Description : A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure ... K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Last Answer : For a very dilute solution ∴ Molecular mass, MB = 34 g/mol.

A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits an azeotrope at 101.3 kPa (B) The composition of the mixture, in percent by volume is: o-xylene 30, p￾xylene 60. and m-xylene 10 (C) The composition of the mixture in mole percent is: o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Description : A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits ... : o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Last Answer : (A) The mixture exhibits an azeotrope at 101.3 kPa

For an ideal liquid solution, which of the following is unity? (A) Activity (B) Fugacity (C) Activity co-efficient (D) Fugacity co-efficient

Description : For an ideal liquid solution, which of the following is unity? (A) Activity (B) Fugacity (C) Activity co-efficient (D) Fugacity co-efficient

Last Answer : (C) Activity co-efficient

When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of component B (B) Vapour pressure of component A to the total pressure (C) Vapour pressure of component A to the partial pressure of A (D) Partial pressure of component A to the total pressure

Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure

Last Answer : (A) Vapour pressure of component A to that of component B

Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles carried 375,200 Cost incurred 562,800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Description : Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles ... 800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Last Answer : (d) Rs28, 140

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its (A) Aqueous tension (B) Saturated humidity (C) Vapor pressure

Description : gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its (A) Aqueous tension (B) Saturated humidity (C) Vapor pressure

Last Answer : Option A

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Last Answer : (C) 274 K

McCabe-Thiele method (A) Uses molal units for material and energy balance (B) Uses weight fractions to express liquid and vapour composition (C) Can use any type of units (D) Is more accurate than Ponchon-Savarit method

Description : McCabe-Thiele method (A) Uses molal units for material and energy balance (B) Uses weight fractions to express liquid and vapour composition (C) Can use any type of units (D) Is more accurate than Ponchon-Savarit method

Last Answer : (A) Uses molal units for material and energy balance

In a homogeneous solution, the activity co-efficient of a component depends upon the (A) Pressure (B) Composition (C) Temperature (D) All (A), (B) and (C)

Description : In a homogeneous solution, the activity co-efficient of a component depends upon the (A) Pressure (B) Composition (C) Temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

Which of the following is not a unit of mass transfer co-efficient? (A) Moles transferred/ [(time) (area) (mole fraction)] (B) Moles transferred/ [(time) (area) (mass A/mass B)] (C) Moles transferred/ [(time) (area) (pressure)] (D) None of these

Description : Which of the following is not a unit of mass transfer co-efficient? (A) Moles transferred/ [(time) (area) (mole fraction)] (B) Moles transferred/ [(time) (area) (mass A/mass B)] (C) Moles transferred/ [(time) (area) (pressure)] (D) None of these

Last Answer : (D) None of these

The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient(B) Increasing the liquid film co-efficient(C) Increasing the total pressure(D) Decreasing the total pressure

Description : The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient (B) Increasing the liquid film co-efficient (C) Increasing the total pressure (D) Decreasing the total pressure

Last Answer : (A) Increasing the gas film co-efficient

For an ideal solution, the value of activity co-efficient is (A) 0 (B) 1 (C) < 1 (D) > 1

Description : For an ideal solution, the value of activity co-efficient is (A) 0 (B) 1 (C) < 1 (D) > 1

Last Answer : (B) 1

Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.

Description : Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.

Last Answer : Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.

The operating line for an absorber is curved, when plotted in terms of (A) Mole fractions (B) Mole ratios (C) Partial pressure (D) Mass fractions

Description : The operating line for an absorber is curved, when plotted in terms of (A) Mole fractions (B) Mole ratios (C) Partial pressure (D) Mass fractions

Last Answer : (C) Partial pressure

For a solution of volatile liquids, the partial vapour pressure of each component in solution is directly proportional to its (a) Molarity (b) Mole fraction (c) Molality (d) Normality

Description : For a solution of volatile liquids, the partial vapour pressure of each component in solution is directly proportional to its (a) Molarity (b) Mole fraction (c) Molality (d) Normality

Last Answer : Ans:(b)

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Molarity and Molality of a solution of an liquid (mol. Wt. = 50) in aqueous solution is 9 and 10 respectively. What is the density of solution ?

Description : Molarity and Molality of a solution of an liquid (mol. Wt. = 50) in aqueous solution is 9 and 10 respectively. What is the density of solution ?

Last Answer : Molarity and Molality of a solution of an liquid (mol. Wt. = 50) in aqueous solution is 9 and 10 respectively. What ... /cc C. 1.05 g/cc D. 1.35 g/cc

The volume of `0.1 N` dibasic acid sufficient to neutralize 1g of a base that furnishes `0.04` mole of `OH^-` in aqueous solution is :

Description : The volume of `0.1 N` dibasic acid sufficient to neutralize 1g of a base that furnishes `0.04` mole of `OH^-` in aqueous solution is :

Last Answer : The volume of `0.1 N` dibasic acid sufficient to neutralize 1g of a base that furnishes `0.04` mole of `OH^-` ... 400 mL B. 600 mL C. 200 mL D. 80 mL

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

The work done in the power transmission with E and H given by 50 and 65 respectively. The velocity of propagation is 20m/s. a) 162.5 b) 621.5 c) 562.1 d) 261.5

Description : The work done in the power transmission with E and H given by 50 and 65 respectively. The velocity of propagation is 20m/s. a) 162.5 b) 621.5 c) 562.1 d) 261.5

Last Answer : a) 162.5

The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Description : The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Last Answer : (A) A . x22

If heat contents of CH4, C2H4 and C3H8 are -17.9, 12.5 and -24.8 kcal/mole respectively, than ΔH for the reaction CH4(g) + C2H4(g) ⇌ C3H8(g) will be __________ Kcal. (A) -19.4 (B) -30.2 (C) 55.2 (D) -55.2

Description : If heat contents of CH4, C2H4 and C3H8 are -17.9, 12.5 and -24.8 kcal/mole respectively, than ΔH for the reaction CH4(g) + C2H4(g) ⇌ C3H8(g) will be __________ Kcal. (A) -19.4 (B) -30.2 (C) 55.2 (D) -55.2

Last Answer : (A) -19.4

Partial molar free energy of an element A in solution is same as its (A) Chemical potential (B) Activity (C) Fugacity (D) Activity co-efficient

Description : Partial molar free energy of an element A in solution is same as its (A) Chemical potential (B) Activity (C) Fugacity (D) Activity co-efficient

Last Answer : (A) Chemical potential

The activity co-efficient of the solute in a dilute solution (A) Decreases with the increase of concentration of the solute (B) Increases with the increase of concentration of the solute (C) Remains constant (D) Is unity at infinite dilution

Description : The activity co-efficient of the solute in a dilute solution (A) Decreases with the increase of concentration of the solute (B) Increases with the increase of concentration of the solute (C) Remains constant (D) Is unity at infinite dilution

Last Answer : (C) Remains constant

A train crosses a long bridge of length 12 km and a standing girl in 600 seconds and 24 seconds respectively. What will be the length of the train? A) 275 B) 480 C) 389 D)225

Description : A train crosses a long bridge of length 12 km and a standing girl in 600 seconds and 24 seconds respectively. What will be the length of the train? A) 275 B) 480 C) 389 D)225

Last Answer : ANSWER:B Explanation: Time taken to cross the bridge(12 km) = 600 seconds.  Speed of the train = Distance / Time  = 12/600 km/s = 12000/600 m/s = 20m/s Train crosses a girl in 24 seconds. ... = Speed of the train x Time Taken  = (20 *24)m  = 480m  Hence the required length is 480 m.

An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5]

Description : An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5] 

Last Answer : Weight of NaCl = 10 kg Weight of H2O = 50 kg Total weight = 60 kg Weight % of NaCl = (10/ 60) * 100 =16.67% Weight % of H2O = (50/ 60) * 100 = 83.33% Molecular weight of NaCl = 58.5 k moles of NaCl ... 100 = 5.79% Mol % of H2O = (moles of H2O / Total moles)*100  = (2.78/ 2.949)*100 = 94.26%

In an ideal solution, the activity of a component equals its (A) Mole fraction (B) Fugacity at the same temperature and pressure (C) Partial pressure (D) None of these

Description : In an ideal solution, the activity of a component equals its (A) Mole fraction (B) Fugacity at the same temperature and pressure (C) Partial pressure (D) None of these

Last Answer : (A) Mole fraction

What is the resulting concentration (in molL) of aqueous hydrochloric acid if 500 mL of its gaseous form at 300 K and 100 kPa will be dissolved in 100 mL pure water Use 8.314 kPaL(Kmol)?

Description : What is the resulting concentration (in molL) of aqueous hydrochloric acid if 500 mL of its gaseous form at 300 K and 100 kPa will be dissolved in 100 mL pure water Use 8.314 kPaL(Kmol)?

Last Answer : Feel Free to Answer

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Description : Presence of a non-condensing gas in a condensing vapour (A) Increases the rate of condensation (B) Decreases thermal resistance (C) Is desirable to increase the film co-efficient (D) None of these

Last Answer : (D) None of these

The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Description : The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Last Answer : (A) Increasing temperature of the vapour

Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Description : Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Last Answer : A) Air cycle

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

Urea is formed only (A) In liquid phase (B) In vapour phase (C) At very high temperature (D) At very low pressure (vacuum)

Description : Urea is formed only (A) In liquid phase (B) In vapour phase (C) At very high temperature (D) At very low pressure (vacuum)

Last Answer : (A) In liquid phase