Description : Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums
Last Answer : (A) Cast iron vessels
Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers
Last Answer : (D) Cast iron containers
Description : DDT is shipped in (A) Stainless steel containers (B) Paper bags (C) Fibre drums (D) Either (B) or (C
Last Answer : (D) Either (B) or (C
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal
Last Answer : (A) Steel
Description : Liquid ammonia is shipped in __________ containers. (A) Steel (B) Aluminium (C) Glass (D) Lead lined
Last Answer : (C) Glass
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these
Last Answer : (A) PTFE and porcelain
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron
Last Answer : (B) Stainless steel
Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel
Last Answer : (B) Cast iron
Description : Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel
Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium
Last Answer : (A) Stainless steel or glass lined steel
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel
Last Answer : (A) Aluminium
Description : Compressed dry air is used as the cutting fluid, while machining (A) Steel (B) Cast iron (C) Aluminium (D) None of these
Last Answer : Option B
Description : is usually used for brush rockers (a) Mild steel (b) Copper (c) Aluminium (d) Cast-iron
Last Answer : (d) Cast-iron
Description : ________ has a lowrelative permeability and is used principally in field frames when cost is of primary importance and extra weight is not objectionable. (a) Cast steel (b) Aluminium (c) Soft steel (d) Cast iron
Last Answer : (d) Cast iron
Description : Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron
Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal
Last Answer : (D) True centrifugal
Description : Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete
Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material
Last Answer : (C) Cast iron
Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement
Description : On being hit with a hammer, __________ will readily fracture. (A) Brass (B) Mild steel (C) Cast iron (D) Lead
Last Answer : C) Cast iron
Description : Lead is poured into the joints between two __________ pipes. (A) Cast iron (B) Steel (C) Concrete (D) Plastic
Last Answer : (A) Cast iron
Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron
Last Answer : D) Wrought iron
Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement
Last Answer : Option C
Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde
Last Answer : (B) Phenol & formaldehyde
Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability
Last Answer : (B) Fluidity & castability
Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate
Last Answer : (C) Nickel
Description : Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Last Answer : (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Description : Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy
Description : Which of the following is not shipped in mild steel containers? (A) Acetone (B) Ammonia (C) Ethyl alcohol (D) Formic acid
Last Answer : (D) Formic acid
Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico
Last Answer : Option A
Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising
Last Answer : (D) Calorising
Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature
Last Answer : (A) High strength to weight ratio
Description : The substance which does not expand on going from liquid state to solid state is – (1) Water (2) Cast-iron (3) Aluminium (4) Type metal
Last Answer : (4) Type metal Explanation: In printing, type metal (sometimes called hot metal) refers to the metal alloys used in traditional type founding and hot metal typesetting. Lead is the main constituent of ... and solidifies in a simple manner at a specific temperature. This is not the case with alloys.
Description : The substance which does not expand on going from liquid state to solid state is (1) Water (2) Cast-iron (3) Aluminium(4) Type metal
Last Answer : Type metal
Description : Out of the following __________ iron has the best capability to bear sudden & excessive shocks. (A) White (B) Cast (C) Wrought (D) Pig
Last Answer : (C) Wrought
Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion
Description : __________ is never shipped in glass carboys. (A) Ammonia (B) Acetic acid (C) Phenol (D) Formaldehyde
Last Answer : (A) Ammonia
Description : Out of the following, TLV of __________ is maximum (about 500 ppm). (A) Carbon dioxide (B) Toluene (C) Carbon disulphide (D) Acetaldehyde
Last Answer : (A) Carbon dioxide
Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank
Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel
Last Answer : (B) Lead
Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain
Last Answer : (B) Glass lined steel
Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these
Last Answer : (C) Packed steel tower lined with acid proof bricks
Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron
Last Answer : (A) Wrought iron
Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron