Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel
Last Answer : (D) Monel
Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel
Last Answer : (B) Lead
Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel
Last Answer : (A) High silicon iron, Kel-F and Teflon
Description : Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)
Last Answer : (D) Hydrochloric acid (concentrated)
Description : Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon
Last Answer : (B) Stainless steel
Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium
Last Answer : (A) Stainless steel or glass lined steel
Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate
Last Answer : (C) Nickel
Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel
Last Answer : (B) Cast iron
Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood
Last Answer : (C) Steel or cement-brick lined
Description : Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Last Answer : (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel
Last Answer : Option C
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)
Last Answer : (B) Fruit juices, milk & its products and caustic soda solution
Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel
Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel
Description : Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)
Last Answer : (A) Anhydrous ammonia
Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete
Last Answer : (A) Steel with top section nickel clad or stainless steel
Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined
Last Answer : (C) Stainless steel-glass lined
Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese
Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese
Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature
Last Answer : (A) High strength to weight ratio
Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these
Last Answer : (A) PTFE and porcelain
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron
Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper
Last Answer : (B) Plain carbon steel
Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material
Last Answer : (C) Cast iron
Description : _________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement
Last Answer : C) Cast iron
Description : Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)
Last Answer : (B) Dry chlorine & dry fluorine
Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel
Last Answer : (A) Aluminium
Description : Wrought iron is a suitable material of construction for handling __________ solutions (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these
Last Answer : (C) Alkalis & alkaline
Description : Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these
Description : Cast iron vessels are not suitable for the storage of (A) Freon (B) H2SO4 (95%) at room temperature (C) H2SO4 (fuming) (D) Wet SO2
Last Answer : (D) Wet SO2
Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium
Last Answer : (A) Chromium and nickel
Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these
Last Answer : (C) Packed steel tower lined with acid proof bricks
Description : Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel
Last Answer : (B) Stainless steel vessel
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : Hydrochloric acid is stored in a __________vessel. (A) Lead lined steel (B) Rubber lined steel (C) Stainless steel (D) Cast iron
Last Answer : (B) Rubber lined steel
Description : Sulphuric acid pickling tanks are lined with (A) Nickel (B) Rubber (C) Aluminium (D) Glass
Last Answer : (B) Rubber
Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel
Last Answer : Option D
Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper
Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)
Last Answer : (C) Sulphuric acid upto 60°C
Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)
Last Answer : (A) Molybdenum stainless steel
Description : The most suitable material for die casting is (A) Iron (B) Copper (C) Steel (D) Nickel
Last Answer : (B) Copper
Description : The material of construction of bearings is (A) Cast iron (B) Babbitt metal (C) Pig iron (D) Steel
Last Answer : (B) Babbitt metal
Description : Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys
Description : Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums
Last Answer : (A) Cast iron vessels
Description : Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine
Last Answer : (B) Nitric acid (10%)
Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal
Last Answer : (D) True centrifugal