Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)

Most suitable material of construction for the storage of concentrated
nitric acid is
(A) Cast iron
(B) Monel
(C) Karbate
(D) Aluminium or chromium alloys (Cr > 18% for cold acid)
by

1 Answer

Answer :

(D) Aluminium or chromium alloys (Cr > 18% for cold acid)
by

Related questions

An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these

Description : An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these

Last Answer : (C) Monel

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Description : Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Last Answer : (A) Inconel

Brine (15% concentration) can be stored in a vessel made of (A) Monel (B) Karbate (C) Cast iron (D) None of these

Description : Brine (15% concentration) can be stored in a vessel made of (A) Monel (B) Karbate (C) Cast iron (D) None of these

Last Answer : (A) Monel

Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature

For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums

Description : Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums

Last Answer : (A) Cast iron vessels

Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)

Description : Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)

Last Answer : (D) Hydrochloric acid (concentrated)

Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Description : Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Last Answer : (B) Stainless steel

A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Last Answer : (D) Monel

Give reason: Aluminium / Iron become passive when immersed in concentrated nitric acid.

Description : Give reason: Aluminium / Iron become passive when immersed in concentrated nitric acid.

Last Answer : Since concentrated nitric acid is a powerful oxidising agent, it forms a protective oxide layer on the metal instantly

What happens when a iron nail or a piece of aluminium wire is dipped in concentrated nitric acid?

Description : What happens when a iron nail or a piece of aluminium wire is dipped in concentrated nitric acid?

Last Answer : Iron nail or aluminium wire does not react with concentrated nitric acid. It makes iron more passive.

In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel

Description : In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel

Last Answer : (B) Chemical stoneware

Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel

Last Answer : (C) Karbate

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

Wrought iron is a suitable material of construction for handling __________ solutions(A) Dilute acidic(B) Concentrated acidic(C) Alkalis & alkaline(D) None of these

Description : Wrought iron is a suitable material of construction for handling __________ solutions (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Last Answer : (C) Alkalis & alkaline

Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Description : Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Last Answer : (C) Alkalis & alkaline

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)

Last Answer : (B) Fruit juices, milk & its products and caustic soda solution

The carbonating tower used in Solvay process of soda ash manufactureis made of(A) Cast iron(B) Stainless steel(C) Karbate(D) Lead lined steel

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate

Description : The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate

Last Answer : (B) Nickel

Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Description : Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Nickel (56%) and molybdenum (17%) alloys are called (A) Monel (B) Hastelloy C (C) Inconel (D) Bronzes

Description : Nickel (56%) and molybdenum (17%) alloys are called (A) Monel (B) Hastelloy C (C) Inconel (D) Bronzes

Last Answer : (B) Hastelloy C

Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel

Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Description : Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Last Answer : (C) Copper

The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Description : Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Last Answer : (C) Steel

Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel

Description : Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel

Last Answer : (B) Stainless steel vessel

Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Last Answer : (B) Stainless steel

Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)

Description : Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)

Last Answer : (B) Dry chlorine & dry fluorine

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

The most suitable vessel for storing concentrated sulphuric acid is – (1) Copper vessel (2) Aluminium vessel (3) Glass vessel (4) Earthen vessel

Description : The most suitable vessel for storing concentrated sulphuric acid is – (1) Copper vessel (2) Aluminium vessel (3) Glass vessel (4) Earthen vessel

Last Answer : (3) Glass vessel Explanation: Concentrated Sulfuric acid can only be stored in glass, no metal lids, some plastic containers. It will attack anything organic, causing severe burns, the good thing is it ... but if it goes into contact with a metal it may generate hydrogen gas, an explosion risk.

The most suitable vessel for storing concentrated sulphuric acid is (1) Copper vessel (2) Aluminium vessel (3) Glass vessel (4) Earthen vessel

Description : The most suitable vessel for storing concentrated sulphuric acid is (1) Copper vessel (2) Aluminium vessel (3) Glass vessel (4) Earthen vessel

Last Answer :  Glass vessel

18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Description : 18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Last Answer : (B) Tungsten, chromium and vanadium

18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Description : 18/8 stainless steel means, that it contains (A) 18% chromium and 8% nickel (B) 18% chromium and 8% molybdenum (C) 18% nickel and 8% chromium (D) 18% molybdenum and 8% chromium

Last Answer : (A) 18% chromium and 8% nickel

Cast iron vessels are not suitable for the storage of (A) Freon (B) H2SO4 (95%) at room temperature (C) H2SO4 (fuming) (D) Wet SO2

Description : Cast iron vessels are not suitable for the storage of (A) Freon (B) H2SO4 (95%) at room temperature (C) H2SO4 (fuming) (D) Wet SO2

Last Answer : (D) Wet SO2

Permanent magnet is normally made of- (a) Aluminum (b) Wrought iron (c) Cast iron (d) Alnico alloys

Description : Permanent magnet is normally made of- (a) Aluminum (b) Wrought iron (c) Cast iron (d) Alnico alloys

Last Answer : Ans: C

The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Last Answer : d. cast iron.