Draw a neat labelled sketch of plate load test set up for determination of field bearing capacity.

Draw a neat labelled sketch of plate load test set up for determination of field bearing capacity.
by

1 Answer

Answer :

Image 867 - .jpg

Figure: Plate Load Test using Reaction Truss Loading


OR


Image 870 - .jpg

by

Related questions

Explain plate load test with neat sketch to determine bearing capacity of soil.

Description : Explain plate load test with neat sketch to determine bearing capacity of soil.

Last Answer : Procedure of plate load test: 1. Excavate a pit of depth equal to 5 times to that of breath of proposed footing. 2. Keep the suitable bearing plate of specified size (30, 45, 60, 75cm square in plan) ... as shown in figure below to find out load before failure as bearing capacity of soil.

Draw neat labelled sketch of Lamont boiler.

Description : Draw neat labelled sketch of Lamont boiler. 

Last Answer : Lamont boiler

Draw a neat and labelled sketch of rebound hammer and write two limitations of it.

Description : Draw a neat and labelled sketch of rebound hammer and write two limitations of it.

Last Answer : Labelled sketch of rebound hammer: Limitations of Rebound hammer test: 1. Rebound of hammer may get affected due to roughness of concrete surface. 2. The age of concrete also varies with ... coarse aggregate may affect rebound number. 5. Size and shape of specimen also affect hammer impact.

Draw a neat labelled sketch of a plan of bridge showing all its components

Description : Draw a neat labelled sketch of a plan of bridge showing all its components

Last Answer : a plan of bridge

Draw a neat labelled sketch of permanent way in embankment

Description : Draw a neat labelled sketch of permanent way in embankment 

Last Answer : Cross section of permanent way in embankment (Single track) OR Cross-section of a double broad gauge track in embankment

Draw a neat and labelled sketches of following: i) Plan of column formwork. ii) Expansion joint with load transfer device.

Description : Draw a neat and labelled sketches of following: i) Plan of column formwork. ii) Expansion joint with load transfer device.

Last Answer : i) Plan of column formwork. ii) Expansion joint with load transfer device.

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

If water table is encountered in the standard pit while conducting plate load test (a) The load test should be abandoned (b) The pit is considered unsafe (c) Test should be conducted with complete dewatering continuously throughout the test duration (d) The bearing capacity of soil cannot be determined in this condition

Description : If water table is encountered in the standard pit while conducting plate load test (a) The load test should be abandoned (b) The pit is considered unsafe (c) Test should be conducted ... continuously throughout the test duration (d) The bearing capacity of soil cannot be determined in this condition

Last Answer : (c) Test should be conducted with complete dewatering continuously throughout the test duration

Explain California bearing Ratio Test with neat sketch to determine % CBR of given soil sample.

Description : Explain California bearing Ratio Test with neat sketch to determine % CBR of given soil sample.

Last Answer : Procedure of California Bearing Ratio Test: 1. Take a given soil; sample and add water equal to OMC of soil to prepare wet mix soil. 2. Take the CBR mould of 150 mm diameter and 175 mm height. Keep it ... Bearing Ratio of given soil as  % CBR = (Test load / Standard load ) X 100.

Describe in brief working of Symons rain gauge with neat labelled sketch.

Description : Describe in brief working of Symons rain gauge with neat labelled sketch.

Last Answer : The most common type of non- recording rain gauges used in our country is the Symon's raingauge'.  Working: A Symons Rain gauge consists of a cylindrical vessel of 127 mm internal diameter with an enlarged ... rim which is then measured by the measuring glass in mm' and tenth of mm'

Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Explain determination of bulking of fine aggregate with neat sketch.

Description : Explain determination of bulking of fine aggregate with neat sketch.

Last Answer : Determination of bulking of fine aggregate (sand): 1. Take 100 gm. of given sand sample and fill it in measuring cylinder about one-third of its weight. Take this volume of sand V1 ml. 2. Now add ... fig below. Note down the maximum % of bulking and corresponding optimum % of water from it.

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

Draw neat sketch showing various parts of die set.

Description : Draw neat sketch showing various parts of die set. 

Last Answer : Answer: 1. Stop 2.Sheet metal 3.Pilot 4.Blanking punch 5.Ram 6.Piercing punch 7.Stripper 8.die Fig. Progressive Die OR

Draw the labelled sketch of turning fixture.

Description : Draw the labelled sketch of turning fixture.

Last Answer : Figure: Back plate of Turning Fixture

Draw a labelled sketch of Earthen dam

Description : Draw a labelled sketch of Earthen dam

Last Answer : Earthen dam

Draw labelled sketch of TWT and give its two applications.

Description : Draw labelled sketch of TWT and give its two applications.

Last Answer : Applications:  * Low noise RF amplifier in broadband microwave receivers. * Repeater amplifiers for long distance telephony. * Used as power output tube in communication satellites. * ... troposcatter links. * Airborne and ship borne pulsed high power radars, EM ground based radars.

Draw a neat and labelled diagram of Ascaris.

Description : Draw a neat and labelled diagram of Ascaris.

Last Answer : Draw a neat and labelled diagram of Ascaris.

Draw a neat and labelled diagram:  1. Cnidoblast 2. Colloblast

Description : Draw a neat and labelled diagram:  1. Cnidoblast 2. Colloblast

Last Answer : Draw a neat and labelled diagram: 1. Cnidoblast 2. Colloblast

Draw a neat labelled diagram showing steam distillation at laboratory scale

Description : Draw a neat labelled diagram showing steam distillation at laboratory scale

Last Answer : labelled diagram showing steam distillation at laboratory scale

Draw a neat labelled diagram of 1-2 shell and tube heat exchanger.

Description : Draw a neat labelled diagram of 1-2 shell and tube heat exchanger. 

Last Answer : 1-2 shell and tube heat exchanger: 

Draw neat labelled constructional diagram of INKJET printer. Describe the function of each block. State two advantages.

Description : Draw neat labelled constructional diagram of INKJET printer. Describe the function of each block. State two advantages.

Last Answer : It is a non-impact printer. It provides letter quality printout than dot matrix printer. Its output is sharper than Dot matrix though its output quality is not to the same level of laser printer ... is compatible in quality to that of a laser printer. Faster when compared to Dot Matrix printers.

Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Description : Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Last Answer : labelled diagram ofAC electric locomotive:  Function of AC electric locomotive Parts: 1) Overhead contact wire: Supply of 1-ph, 25KV, 50Hz, AC is given to overhead conductor. 2) Current collecting ... mechanical power to run the train i.e. DC series motor which is used as traction motor.

Draw a neat labelled diagram of photocell and state two properties of photons.

Description : Draw a neat labelled diagram of photocell and state two properties of photons.  

Last Answer : Properties of Photon: 1) Photon is electrically neutral. 2) Photon travels with speed of light. 3) Photon do not ionized. 4) Photon has rest mass zero. 5) Photon cannot be deflected by electric or magnetic ... has momentum term h / λ 7) Photon has definite packets of energy given by E = hʋ

Draw a neat labelled diagram of feeding post and write any four points related to it.

Description : Draw a neat labelled diagram of feeding post and write any four points related to it.

Last Answer : Feeding post: 1) Each feeder has two conductors one insulated for 25 kV (connected to bus-bar) and other for 3 kV (connected to track for return current). 2) Located as near as ... are supposed to operate only under normal current as they are not provided with protection for the same. 

Draw a neat labelled diagram of PLC. Explain the function of each block.

Description : Draw a neat labelled diagram of PLC. Explain the function of each block.

Last Answer : Block Diagram of PLC:-  A simplified block diagram of a PLC shown in above Fig. It has three major units/sections.  I/O (Input/Output) Modules.  CPU (Central ... membrane keypad for program entry, and a display device (LED or LCD) for viewing program steps of functions. 

In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Description : In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Last Answer : (B) Between 300 mm and 750 mm

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Description : A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Last Answer : (C) 50 mm

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

Define ‘ Fore bearing ’ & ‘ back bearing ’ of line with a neat sketch

Description : Define ‘ Fore bearing ’ & ‘ back bearing ’ of line with a neat sketch

Last Answer : Fore bearing : The bearing of line observed in the direction of progress of survey is called fore bearing of the line. Bearing of line AB is observed at A' towards B' is called as fore bearing of the line ... The bearing observed at B' towards A' is called as back bearing of the line AB'  

With neat sketch, write the procedure of measurement of fore bearing with compass.

Description : With neat sketch, write the procedure of measurement of fore bearing with compass.

Last Answer : For measuring fore bearing of line AB, i) Place the compass over station A, center and level it.  ii) Looking through eye slit towards object vane, bisect the ranging rod at station ... which coincides with horse hair at observer end. The observed reading is the fore bearing of line AB

Explain with sketch plate load test.

Description : Explain with sketch plate load test.

Last Answer : Procedure i) Excavate a pit of depth equal to 5 times to that of breath of proposed footing. ii) Keep the suitable bearing plate of specified size (30, 45, 60, 75cm square in plan) ... Finally plot a graph of load vs. settlement to find out load before failure as bearing capacity of soil. 

Explain the plate load test with sketch of reaction truss method.

Description : Explain the plate load test with sketch of reaction truss method.

Last Answer : i) Plate load test is field test to determine the ultimate bearing capacity of soil and probable settlement under given loading. ii)The test essentially consist in loading a rigid plate, called bearing ... and load intensity and ultimate bearing capacity (qu) of soil is found out. 

Given below is a diagrammatic sketch of a portion of human male reproductive system . Select the correct set of the names of the parts labelled . A ,

Description : Given below is a diagrammatic sketch of a portion of human male reproductive system . Select the correct set of the names of the parts labelled . A ,

Last Answer : Given below is a diagrammatic sketch of a portion of human male reproductive system . Select the correct ... , "Bulbourethral gland" , "Prostate"):}`

Given below is a diagrammatic sketch of a portion of human male reproductive system. Select the correct set of the names of the parts labelled A, B, C, D. A B C D (a) A-Vas deferens, B-Seminal vesicle, C-Prostate, D-Bulbourethral gland (b) A-Vas deferens, B-Seminal vesicle, C-Bulbourethral gland, D-Prostate (c) A-Ureter, B-Seminal vesicle, C-Prostate, D-Bulbourethral gland (d) A-Ureter, B-Prostate, C-Seminal vesicle, D-Bulbourethral gland

Description : Given below is a diagrammatic sketch of a portion of human male reproductive system. Select the correct set of the names of the parts labelled A, B, C, D. A B C D (a) A-Vas deferens, ... vesicle, C-Prostate, D-Bulbourethral gland (d) A-Ureter, B-Prostate, C-Seminal vesicle, D-Bulbourethral gland

Last Answer : (a) A-Vas deferens, B-Seminal vesicle, C-Prostate, D-Bulbourethral gland

Describe with neat sketch construction details of clutch plate.

Description : Describe with neat sketch construction details of clutch plate.

Last Answer : Fig:- Single Plate Clutch Constructional details : It consist of steel plate with a splined central hub. Annular friction facing are attached to the steel plates by rivets. Special resins are ... are similar type of slots in each of the two plates situated on either side of the hub flang 

Describe with neat sketch the installation of plate earthing.

Description : Describe with neat sketch the installation of plate earthing.  

Last Answer : Diagram of Plate earthing :  Explanation: * The earthing is installed as per above figure. * The size of earthing plate is 60cm x 60cm x 3.18 mm copper. * The earth wire ... . * The Plate type earthing is generally carried out muddy area where percentage of loose earth soil is more 

Draw the experimental setup of plate load test using gravity loading.

Description : Draw the experimental setup of plate load test using gravity loading.

Last Answer : Plate Load Test :- 1.Bearing Plate: - It is either circular or square made up mild steel of not less than 25mm thickness and varying in size from 300 to 750mm with grooved bottom. For clayey soil ... settlement curve is plotted where load intensity is on X axis and Settlement is on Y axis.

Explain plate load test and draw a load settlement curve

Description : Explain plate load test and draw a load settlement curve

Last Answer : i) Plate load test is a filed test to determine the ultimate bearing capacity f soil and probable settlement under given loading. ii) The test essentially consist in loading a rigid plate, called bearing ... /hr xi) the results of test are plotted between settlement and load intensity

Draw a neat sketch and explain the use of CT and PT for measurement of power in a single-phase circuit?

Description : Draw a neat sketch and explain the use of CT and PT for measurement of power in a single-phase circuit?

Last Answer : If wattmeter of proper range is not available or if voltage and current ranges are high we can usr CT and PT of suitable ratio. Connect the CT and PT as shown in figure. The reading of wattmeter can be multiplied by the ratio to get the actual power.   

Draw a neat sketch of Electro-dialysis.

Description : Draw a neat sketch of Electro-dialysis.

Last Answer : Electro- dialysis:

Draw a neat sketch of cross-section of an exogenous tree and label the parts.

Description : Draw a neat sketch of cross-section of an exogenous tree and label the parts. 

Last Answer : Cross-section of an exogenous tree:

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Draw the neat sketch of overhead valve operating mechanism and explain its working.

Description : Draw the neat sketch of overhead valve operating mechanism and explain its working.

Last Answer : Overhead valve mechanism: Figure shows the valve mechanism to operate the valve when it is in the cylinder head (in I and F head design). This type of mechanism requires two additional moving parts the push ... close. A spring (attached to the valve) returns the valve to its seated position.   

Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Description : Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Last Answer : Figure: Valve timing diagram of 4 stroke SI engine  

(i) state any two applications of I. C. Engine (ii) Draw a neat sketch of Two stroke petrol engine.

Description : (i) state any two applications of I. C. Engine (ii) Draw a neat sketch of Two stroke petrol engine.

Last Answer : Applications of I.C engine 1) In Automotive - i) Two stroke engine - Mopeds, Scooters. ii) Four stroke engine - Light vehicles, Heavy vehicles. 2) Marine Application - Ships, Boat 3) Locomotive s - ... handling system  (ii) Draw a neat sketch of Two stroke petrol engine. OR

Draw a neat lebelled sketch of optical square. Explain its working.

Description : Draw a neat lebelled sketch of optical square. Explain its working.

Last Answer : Working of optical square1. Optical square works on principle of optical square to set perpendicular offset 2. Keep ranging rods at point B and C as shown in fig. 3. Observe the ... matched each other point D can be marked on ground and distance CD is measured as perpendicular offset.

Draw a neat sketch of an arrow with dimensions.

Description : Draw a neat sketch of an arrow with dimensions.

Last Answer :  neat sketch of an arrow with dimensions

Draw a neat labeled sketch of 30m chain.

Description : Draw a neat labeled sketch of 30m chain.

Last Answer : neat labeled sketch of 30m chain

Draw a neat sketch of optical square. Explain its working.

Description : Draw a neat sketch of optical square. Explain its working.

Last Answer : Optical Square: Working: The optical square consists of circular box 50 mm in diameter, 12.5 mm in depth. The box has three slits as A,B, and C. bb' is horizon glass, half silvered i.e ... the point on the chain line where the offset can be dropped to meet point J as shown in fig.