Draw a neat labelled sketch of a plan of bridge showing all its components

Draw a neat labelled sketch of a plan of bridge showing all its components
by

1 Answer

Answer :

image a plan of bridge

by

Related questions

Draw a neat sketch showing RCC components of lintel with 1:20 scale.

Description : Draw a neat sketch showing RCC components of lintel with 1:20 scale.

Last Answer : Draw a neat sketch showing RCC components of lintel with 1:20 scale.

Draw a neat labelled diagram showing steam distillation at laboratory scale

Description : Draw a neat labelled diagram showing steam distillation at laboratory scale

Last Answer : labelled diagram showing steam distillation at laboratory scale

Draw neat labelled sketch of Lamont boiler.

Description : Draw neat labelled sketch of Lamont boiler. 

Last Answer : Lamont boiler

Draw a neat and labelled sketch of rebound hammer and write two limitations of it.

Description : Draw a neat and labelled sketch of rebound hammer and write two limitations of it.

Last Answer : Labelled sketch of rebound hammer: Limitations of Rebound hammer test: 1. Rebound of hammer may get affected due to roughness of concrete surface. 2. The age of concrete also varies with ... coarse aggregate may affect rebound number. 5. Size and shape of specimen also affect hammer impact.

Draw a neat labelled sketch of permanent way in embankment

Description : Draw a neat labelled sketch of permanent way in embankment 

Last Answer : Cross section of permanent way in embankment (Single track) OR Cross-section of a double broad gauge track in embankment

Draw a neat labelled sketch of plate load test set up for determination of field bearing capacity.

Description : Draw a neat labelled sketch of plate load test set up for determination of field bearing capacity.

Last Answer : Figure: Plate Load Test using Reaction Truss Loading OR

Write the procedure of construction of WBM road with neat sketch showing various components

Description : Write the procedure of construction of WBM road with neat sketch showing various components

Last Answer : Construction Procedure:  a) Preparation of Foundation: The foundation for receiving the layer of WBM may be either the sub-grade or sub-base or base course. The depressions and pot holes on the existing road ... water and rolled. No traffic is allowed till WBM layer sets and dries out. 

Draw a neat sketch of simple curve showing all elements.

Description : Draw a neat sketch of simple curve showing all elements.

Last Answer : Simple curve

Draw neat sketch showing various parts of die set.

Description : Draw neat sketch showing various parts of die set. 

Last Answer : Answer: 1. Stop 2.Sheet metal 3.Pilot 4.Blanking punch 5.Ram 6.Piercing punch 7.Stripper 8.die Fig. Progressive Die OR

Draw neat sketch of compound die, showing various parts of it.

Description : Draw neat sketch of compound die, showing various parts of it.

Last Answer : Answer:

Draw a neat and labelled sketches of following: i) Plan of column formwork. ii) Expansion joint with load transfer device.

Description : Draw a neat and labelled sketches of following: i) Plan of column formwork. ii) Expansion joint with load transfer device.

Last Answer : i) Plan of column formwork. ii) Expansion joint with load transfer device.

Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Describe in brief working of Symons rain gauge with neat labelled sketch.

Description : Describe in brief working of Symons rain gauge with neat labelled sketch.

Last Answer : The most common type of non- recording rain gauges used in our country is the Symon's raingauge'.  Working: A Symons Rain gauge consists of a cylindrical vessel of 127 mm internal diameter with an enlarged ... rim which is then measured by the measuring glass in mm' and tenth of mm'

Draw labelled sketch of TWT and give its two applications.

Description : Draw labelled sketch of TWT and give its two applications.

Last Answer : Applications:  * Low noise RF amplifier in broadband microwave receivers. * Repeater amplifiers for long distance telephony. * Used as power output tube in communication satellites. * ... troposcatter links. * Airborne and ship borne pulsed high power radars, EM ground based radars.

Draw the labelled sketch of turning fixture.

Description : Draw the labelled sketch of turning fixture.

Last Answer : Figure: Back plate of Turning Fixture

Draw a labelled sketch of Earthen dam

Description : Draw a labelled sketch of Earthen dam

Last Answer : Earthen dam

Draw a neat and labelled diagram of Ascaris.

Description : Draw a neat and labelled diagram of Ascaris.

Last Answer : Draw a neat and labelled diagram of Ascaris.

Draw a neat and labelled diagram:  1. Cnidoblast 2. Colloblast

Description : Draw a neat and labelled diagram:  1. Cnidoblast 2. Colloblast

Last Answer : Draw a neat and labelled diagram: 1. Cnidoblast 2. Colloblast

Draw a neat labelled diagram of 1-2 shell and tube heat exchanger.

Description : Draw a neat labelled diagram of 1-2 shell and tube heat exchanger. 

Last Answer : 1-2 shell and tube heat exchanger: 

Draw neat labelled constructional diagram of INKJET printer. Describe the function of each block. State two advantages.

Description : Draw neat labelled constructional diagram of INKJET printer. Describe the function of each block. State two advantages.

Last Answer : It is a non-impact printer. It provides letter quality printout than dot matrix printer. Its output is sharper than Dot matrix though its output quality is not to the same level of laser printer ... is compatible in quality to that of a laser printer. Faster when compared to Dot Matrix printers.

Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Description : Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Last Answer : labelled diagram ofAC electric locomotive:  Function of AC electric locomotive Parts: 1) Overhead contact wire: Supply of 1-ph, 25KV, 50Hz, AC is given to overhead conductor. 2) Current collecting ... mechanical power to run the train i.e. DC series motor which is used as traction motor.

Draw a neat labelled diagram of photocell and state two properties of photons.

Description : Draw a neat labelled diagram of photocell and state two properties of photons.  

Last Answer : Properties of Photon: 1) Photon is electrically neutral. 2) Photon travels with speed of light. 3) Photon do not ionized. 4) Photon has rest mass zero. 5) Photon cannot be deflected by electric or magnetic ... has momentum term h / λ 7) Photon has definite packets of energy given by E = hʋ

Draw a neat labelled diagram of feeding post and write any four points related to it.

Description : Draw a neat labelled diagram of feeding post and write any four points related to it.

Last Answer : Feeding post: 1) Each feeder has two conductors one insulated for 25 kV (connected to bus-bar) and other for 3 kV (connected to track for return current). 2) Located as near as ... are supposed to operate only under normal current as they are not provided with protection for the same. 

Draw a neat labelled diagram of PLC. Explain the function of each block.

Description : Draw a neat labelled diagram of PLC. Explain the function of each block.

Last Answer : Block Diagram of PLC:-  A simplified block diagram of a PLC shown in above Fig. It has three major units/sections.  I/O (Input/Output) Modules.  CPU (Central ... membrane keypad for program entry, and a display device (LED or LCD) for viewing program steps of functions. 

Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Description : Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Last Answer : Functions of equipment: 1) circuit breaker: disconnects the locomotive equipment from the supply in the event of fault in the equipment / loco. 2) On load tap changer, used to control the ... 6) Traction motor: operates as per the required operating characteristics to take on the traction load.

Describe in brief caisson foundation for a bridge with neat sketch

Description : Describe in brief caisson foundation for a bridge with neat sketch

Last Answer : Caisson foundation A caisson foundation also called as pier foundation is a watertight retaining structure used as a bridge pier in the construction of a concrete dam or for the repair of ships. It is ... the ground to some desired depth and then filled with concrete thus forming a foundation.

Draw simple labeled sketch showing forging sequence for manufacturing Crank Shaft.

Description : Draw simple labeled sketch showing forging sequence for manufacturing Crank Shaft.

Last Answer : Forging Sequence for Manufacturing Crank Shaft: [1] Stock is redistributed and size is increased at certain place and reduced at other place by roll forging. [2] After preliminary roll forging, ... Then the finished part is then trimmed in blanking die to remove excess metal or flash.   

Write four requirements of good formwork and draw a sketch showing cross section of formwork for a L-shaped column.

Description : Write four requirements of good formwork and draw a sketch showing cross section of formwork for a L-shaped column.

Last Answer : i. It should be strong enough to resist the weight of concrete, workers and machinery. ii. It should be economical compared to total cost of construction. iii. It should be possible to use the ... available. vii. It should be rigid enough to retain its shape without deflection or bulging.

Draw neat sketches of: (i) Conventional bricks and (ii) Standard bricks showing all the dimensions

Description : Draw neat sketches of: (i) Conventional bricks and (ii) Standard bricks showing all the dimensions

Last Answer : i) Conventional brick.   ii) Standard brick.

Show the following components in an engine with neat sketch: piston, connecting rod, valves, spark plug

Description : Show the following components in an engine with neat sketch: piston, connecting rod, valves, spark plug

Last Answer : OR

Explain the basic components of pneumatic system with neat sketch.

Description : Explain the basic components of pneumatic system with neat sketch.

Last Answer : Ans:- Gas based system is called pneumatic system. A pneumatic system uses compressed air as medium. It consist of element like compressor , reservior , control valve cylinder piston and motor. ... and motor. 5. The control valve operates the cylinder -piston as per load requirement. 

Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Description : Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Last Answer : Diagram : Control valve: - control and regulates the direction of flow and pressure etc. Air actuator: - Air cylinders and motors are used to obtain the required movements of direction flow.

Draw the neat sketch of overhead valve operating mechanism and explain its working.

Description : Draw the neat sketch of overhead valve operating mechanism and explain its working.

Last Answer : Overhead valve mechanism: Figure shows the valve mechanism to operate the valve when it is in the cylinder head (in I and F head design). This type of mechanism requires two additional moving parts the push ... close. A spring (attached to the valve) returns the valve to its seated position.   

Draw a neat lebelled sketch of optical square. Explain its working.

Description : Draw a neat lebelled sketch of optical square. Explain its working.

Last Answer : Working of optical square1. Optical square works on principle of optical square to set perpendicular offset 2. Keep ranging rods at point B and C as shown in fig. 3. Observe the ... matched each other point D can be marked on ground and distance CD is measured as perpendicular offset.

Draw a neat sketch of optical square. Explain its working.

Description : Draw a neat sketch of optical square. Explain its working.

Last Answer : Optical Square: Working: The optical square consists of circular box 50 mm in diameter, 12.5 mm in depth. The box has three slits as A,B, and C. bb' is horizon glass, half silvered i.e ... the point on the chain line where the offset can be dropped to meet point J as shown in fig.  

Draw a neat sketch of prismatic compass and label its component parts

Description : Draw a neat sketch of prismatic compass and label its component parts

Last Answer : Sketch of prismatic compass and label its component parts

Draw neat sketch of pre-combustion chamber and name its parts.

Description : Draw neat sketch of pre-combustion chamber and name its parts.

Last Answer : Fig. Pre-combustion chamber

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode.

Description : Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode. 

Last Answer : Construction A PIN diode is made up of three semiconductor materials; two heavily doped P- and N- type material separated by an intrinsic (undoped) semiconductor (I) as shown in above figure ... . This advantage allows the PIN diode to process even weak signals.  Characteristics

Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Description : Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Last Answer : Loop antenna:-The single turn coil carrying RF current through it having length less than the wavelength.   Advantages:- 1. highly directive 2. Small size Applications:- 1. For direction finding 2. In portable receivers 3. In navigation 

Draw neat sketch of Rotameter and explain its working principle.

Description : Draw neat sketch of Rotameter and explain its working principle.

Last Answer : Rotameter: - A variable-area flowmeter is one where the fluid must pass through a restriction whose area increases with flow rate. The height of the float is directly proportional to the flowrate ... on glass tube and the flow rate can be determined by direct observation of the metering tube  

Suggest the type of joints in concrete when it is likely to increase in volume due to temperature change. Explain it and draw its neat sketch.

Description : Suggest the type of joints in concrete when it is likely to increase in volume due to temperature change. Explain it and draw its neat sketch.

Last Answer : When it is likely to increase in volume due to temperature change expansion joint is constructed. i. Expansion joints are provided by keeping a gap between panels of concrete and later sealing it ii. ... cotton and finally such joint is sealed using sealants like wood, thermocol or bitumen. 

Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Description : Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Last Answer : Figure: Coupler Rod of Locomotive  (Link AD = Link BC = Crank Link CD = Coupling Rod Link AB = Fixed Link = Frame) Working of Coupler Rod of Locomotive: It is an ... center distance between them. This mechanism is meant for transmitting rotary motion from one wheel to the other wheel.

Draw layout of sprinkler irrigation system showing various components on it

Description : Draw layout of sprinkler irrigation system showing various components on it

Last Answer : layout of sprinkler irrigation system showing various components on it 

Draw a neat sketch and explain the use of CT and PT for measurement of power in a single-phase circuit?

Description : Draw a neat sketch and explain the use of CT and PT for measurement of power in a single-phase circuit?

Last Answer : If wattmeter of proper range is not available or if voltage and current ranges are high we can usr CT and PT of suitable ratio. Connect the CT and PT as shown in figure. The reading of wattmeter can be multiplied by the ratio to get the actual power.   

Draw a neat sketch of Electro-dialysis.

Description : Draw a neat sketch of Electro-dialysis.

Last Answer : Electro- dialysis:

Draw a neat sketch of cross-section of an exogenous tree and label the parts.

Description : Draw a neat sketch of cross-section of an exogenous tree and label the parts. 

Last Answer : Cross-section of an exogenous tree:

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Description : Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Last Answer : Figure: Valve timing diagram of 4 stroke SI engine