A sample of soil 10 cm height and 50 cm2 in c/s area water flows through the soil under a constant head of 80 cm. Water collected in 9 minutes is 450 C.C. Find the coefficient of permeability.

A sample of soil 10 cm height and 50 cm2 in c/s area water flows through the soil under a constant head of 80 cm. Water collected in 9 minutes is 450 C.C. Find the coefficient of permeability. 

by

1 Answer

Answer :

Solution: 

Image 876 - .jpg

by

Related questions

The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Description : The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Last Answer : (A) cm/sec

The quantity of seepage of water through soils is proportional to (A) Coefficient of permeability of soil (B) Total head loss through the soil (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : The quantity of seepage of water through soils is proportional to (A) Coefficient of permeability of soil (B) Total head loss through the soil (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

Explain determination of coefficient of permeability by constant head method.

Description : Explain determination of coefficient of permeability by constant head method.

Last Answer : Procedure of determination of coefficient of permeability by constant head method: 1. Take 2.5 Kg air dried soil sample passing through 9.5mm IS sieve. Add the water in soil equals to its ... . Repeat all above steps two more times to get average coefficient of permeability of given soil sample.

Write step by step procedure to determine coefficient of permeability of fine grained soil by falling head method in laboratory.

Description : Write step by step procedure to determine coefficient of permeability of fine grained soil by falling head method in laboratory.

Last Answer : This method is suitable for fine grained soil as quantity of water collected through soil mass is very less and cannot be measured accurately 2. The falling head test is used for relatively less permeable ... equal to the difference of water level in the stand pipe and the bottom tank. 

Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Description : Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Last Answer : (B) 15-45 Kgf/cm2 & 450-550°C

Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Description : Due to a rise in temperature, the viscosity and the unit weight of the percolating fluid are reduced to 60% and 90% respectively. If other things remain constant, the coefficient of permeability (A) Increases by 25 % (B) Increases by 50 % (C) Increases by 33.3 % (D) Decreases by 33.3 %

Last Answer : (B) Increases by 50 %

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Description : Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Last Answer : b) 4

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Description : Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Last Answer : Slant height of cone, l = 14 cm Let the radius of the cone be r. (i) We know, CSA of cone = πrl Given: Curved surface area of a cone is 308 cm2 (308 ) = (22/7) r 14 308 = 44 r r = 308 ... Total surface area of cone = 308+(22/7) 72 = 308+154 Therefore, the total surface area of the cone is 462 cm2.

The curved surface area of a right circular cylinder of height 14 cm is 88 cm2. Find the diameter of the base of the cylinder. (Assume π =22/7 ) -Maths 9th

Description : The curved surface area of a right circular cylinder of height 14 cm is 88 cm2. Find the diameter of the base of the cylinder. (Assume π =22/7 ) -Maths 9th

Last Answer : Height of cylinder, h = 14cm Let the diameter of the cylinder be d Curved surface area of cylinder = 88 cm2 We know that, formula to find Curved surface area of cylinder is 2πrh. So 2πrh =88 cm2 (r is the ... 88 cm2 2r = 2 cm d =2 cm Therefore, the diameter of the base of the cylinder is 2 cm.

The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Description : The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Last Answer : Let the length of one parallel side of trapezium is a. So length of other parallel side = a + 4 Given the area of trapezium = 475 & the height = 19 Now area of a trapezium = 21 height ... =23∴Length of smalle rparallel side of trapezium =23 & Length of other parallel side of trapezium = 23+4=27

The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Description : The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Last Answer : According to question find the lengths of its two parallel sides

If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Description : If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Last Answer : It is 3 cm high.

If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Description : If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Last Answer : It is 3 cm high.

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

Which of the following methods is more suitable for the determination of permeability of clayey soil? (A) Constant head method (B) Falling head method (C) Horizontal permeability test (D) None of the above

Description : Which of the following methods is more suitable for the determination of permeability of clayey soil? (A) Constant head method (B) Falling head method (C) Horizontal permeability test (D) None of the above

Last Answer : Answer: Option B

Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Description : Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Last Answer : Answer: Option D

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

A soil has bulk density 2.30 g/cm3 and water content 15 per cent, the dry density of the sample, is (A) 1.0 g/cm2 (B) 1.5 g/cm3 (C) 2.0 g/cm3 (D) 2.5 g/cm3

Description : A soil has bulk density 2.30 g/cm3 and water content 15 per cent, the dry density of the sample, is (A) 1.0 g/cm2 (B) 1.5 g/cm3 (C) 2.0 g/cm3 (D) 2.5 g/cm3

Last Answer : (C) 2.0 g/cm3

high pressure boiler generates steam at a pressure greater than __________ kg/cm2. (A) 10 (B) 30 (C) 50 (D) 80

Description : high pressure boiler generates steam at a pressure greater than __________ kg/cm2. (A) 10 (B) 30 (C) 50 (D) 80

Last Answer : Option D

Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the aquifer is 30 m/day and its porosity is 0.25, the time of travel of an inert tracer from one well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Last Answer : (b) 750 days

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is (A) 14 cm(B) 15 cm2(C) 16 cm2(D) 17 cm

Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm

Last Answer : Answer: Option C

Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Description : Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Last Answer : (C) Both compressibility and permeability

Coefficient of permeability of soil (A) Does not depend upon temperature (B) Increases with the increase in temperature (C) Increases with the decrease in temperature (D) None of the above

Description : Coefficient of permeability of soil (A) Does not depend upon temperature (B) Increases with the increase in temperature (C) Increases with the decrease in temperature (D) None of the above

Last Answer : Answer: Option B

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Last Answer : Answer: Option D

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

ΔABC ~ ΔPQR. Area of ΔABC = 81 cm2 and area of ΔPQR =121 cm2. If altitudeAD = 9 cm, then PM is equal to (a) 9 cm (b) 11 cm (c) 10cm (d) None of these

Description : ΔABC ~ ΔPQR. Area of ΔABC = 81 cm2 and area of ΔPQR =121 cm2. If altitudeAD = 9 cm, then PM is equal to (a) 9 cm (b) 11 cm (c) 10cm (d) None of these

Last Answer : (b) 11 cm

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm(C) 150 cm (D) 200 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

.If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Description : .If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Last Answer : .10

The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Description : The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Last Answer : (B) 10 -1 cm2 /sec

A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head

Description : A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head

Last Answer : Ans:(c)

Find the lateral surface area and total surface area of a cuboid of length 80 cm, breadth 40 cm and height 20 cm. -Maths 9th

Description : Find the lateral surface area and total surface area of a cuboid of length 80 cm, breadth 40 cm and height 20 cm. -Maths 9th

Last Answer : Length of cuboid (l) = 80 cm Breadth (b) = 40 cm Height (h) = 20 cm (i) ∴ Lateral surface area = 2h(l + b) = 2 x 20(80 + 40) cm² = 40 x 120 = 4800 cm² (ii) Total surface area = 2(lb ... x 40 + 40 x 20 + 20 x 80) cm² = 2(3200 + 800 + 1600) cm² = 5600 x 2 = 11200 cm²

In citrus 80-90% of the active roots are present in the soil to a depth of: a. 25 cm b. 50 cm c. 75 cm d. 100 cm

Description : In citrus 80-90% of the active roots are present in the soil to a depth of: a. 25 cm b. 50 cm c. 75 cm d. 100 cm

Last Answer : 25 cm

A 10 C of charge flows through a wire in 5 minutes. The radius of the wire is 1 mm. It contains `5xx10^(22)` electrons per `"centimetre"^(3)`. Calcula

Description : A 10 C of charge flows through a wire in 5 minutes. The radius of the wire is 1 mm. It contains `5xx10^(22)` electrons per `"centimetre"^(3)`. Calcula

Last Answer : A 10 C of charge flows through a wire in 5 minutes. The radius of the wire is 1 mm. It ... centimetre"^(3)`. Calculate the current and drift velocity.

A suspended particle falls through a height minutes. If the viscosity of water is and specific gravity of the particle is , the diameter of the particle is (where M is a constant factor) (A) 103M (H/t) (B) 104M (H/t) (C) 105M (H/t) (D) 102M (H/t)

Description : A suspended particle falls through a height minutes. If the viscosity of water is and specific gravity of the particle is , the diameter of the particle is (where M is a constant factor) (A) 103M (H/t) (B) 104M (H/t) (C) 105M (H/t) (D) 102M (H/t)

Last Answer : Answer: Option C

The area of a rhombus 10 cm2 .If one if its diagonal is 4 cm,then find the other diagonal. -Maths 9th

Description : The area of a rhombus 10 cm2 .If one if its diagonal is 4 cm,then find the other diagonal. -Maths 9th

Last Answer : hope its clear

If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Description : If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Last Answer : Answer: Option D

If a river flows from west to east with constant velocity of 1.0 m s-1 and a boat leaves south bank heading towards north with velocity of 2.40 m s-1, then resultant velocity of boat is A. 2.6 m s-1 B. 2.7 m s-1 C. 2.8 m s-1 D. 2.9 m s-1

Description :  If a river flows from west to east with constant velocity of 1.0 m s-1 and a boat leaves south bank heading towards north with velocity of 2.40 m s-1, then resultant velocity of boat is A. 2.6 m s-1 B. 2.7 m s-1 C. 2.8 m s-1 D. 2.9 m s-1

Last Answer : 2.6 m s-1

The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

While taking sample of water from well, sample is collected a)About 2 metre above the bottom of wel b) About 1 metre above the bottom of well * c)About 1 metres below the bottom of well d) none of the above

Description : While taking sample of water from well, sample is collected a)About 2 metre above the bottom of wel b) About 1 metre above the bottom of well * c)About 1 metres below the bottom of well d) none of the above

Last Answer : b) About 1 metre above the bottom of well *

For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Last Answer : Answer: Option B

According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Description : According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Last Answer : Answer: Option A