If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease

If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease
by

1 Answer

Answer :

(1) decreases Explanation: The weight of a body on the earth is the amount of gravitational pull on it exerted by the earth. Similarly there is another force exerted on a body on earth, that is centrifugal force due to its rotation which tries to move the body away from the centre of the earth and its maximum at the equator as the velocity of rotation is maximum at the equator of the earth. The gravitational force is balanced by the centrifugal force. With the increase in the speed of rotation of the earth the body at the equator will come more under the influence of the centrifugal force and the weight of the body will seem to have decreased.
by
selected by

Related questions

If speed of rotation of the earth increases, the weight of the body (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Description : If speed of rotation of the earth increases, the weight of the body (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Last Answer : decreases

In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Description : In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Last Answer : c. Depends on speed ratio

If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Description : If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Last Answer : (1) Increases Explanation: The density of pure fresh milk being on the average 1.032, while the density of fat globules is about 0.86. It follows that the removal of cream will increase the density, while the addition of water will decrease it.

For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Last Answer : (A) Decreases

After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Description : After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Last Answer : Answer: Option A

If cream is removed from milk, its density (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Description : If cream is removed from milk, its density (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Last Answer : Increases

With increase in pump speed, its NPSH requirement (A) Decreases (B) Increases (C) Remains unaltered (D) Can either increase or decrease; depends on other factors

Description : With increase in pump speed, its NPSH requirement (A) Decreases (B) Increases (C) Remains unaltered (D) Can either increase or decrease; depends on other factors

Last Answer : (B) Increases

The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Description : The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Last Answer : (B) Progressively decreases

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Description : As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Last Answer : (C) Increases

With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Last Answer : (B) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Description : With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Last Answer : (A) Increases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Last Answer : (B) Decreases

As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Description : As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Last Answer : decreases

With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Last Answer : (B) Decreases

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (C) Remains unchanged

At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : C) Remains unchanged

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Description : Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Last Answer : ANSWER : A

What happens to atmospheric pressure with increase in altitude? (1) It remains constant (2) It decreases (3) It increases (4) It constantly fluctuates

Description : What happens to atmospheric pressure with increase in altitude? (1) It remains constant (2) It decreases (3) It increases (4) It constantly fluctuates

Last Answer : (2) It decreases Explanation: In most circumstances atmospheric pressure is closely approximated by the hydrostatic pressure caused by the mass of air above the measurement point. Low- ... increases, there is less overlying atmospheric mass, so that pressure decreases with increasing elevation.

How the interest-level of a country is affected by FDI? (1) increases (2) decreases (3) remains unaffected (4) there is increase or decrease

Description : How the interest-level of a country is affected by FDI? (1) increases (2) decreases (3) remains unaffected (4) there is increase or decrease

Last Answer : (2) decreases Explanation: A higher international interest rate will decrease FDI since it means a higher cost of fund in international market, and vice versa. Interest rate is a measure of the cost of capital ... to a decrease in FDI. Interest rate and FDI can both be the cause and effect of other.

With increases in pressure, the conversion of Ammonium carbamate into urea (A) Increases (B) Decreases (C) Remains unaltered (D) Can either increase or decrease depends on biuret content

Description : With increases in pressure, the conversion of Ammonium carbamate into urea (A) Increases (B) Decreases (C) Remains unaltered (D) Can either increase or decrease depends on biuret content

Last Answer : (A) Increases

How the interest-level of a country is affected by FDI ? (1) increases (2) decreases (3) remains unaffected (4) there is increase or decrease

Description : How the interest-level of a country is affected by FDI ? (1) increases (2) decreases (3) remains unaffected (4) there is increase or decrease

Last Answer : decreases

In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Description : In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Last Answer : In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases ... B. may increase or decrease C. increases D. decreases

In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Description : In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Last Answer : In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c) ... off decrease B. remains constant C. decreases D. increases

Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Description : Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Last Answer : a) increases

As we move from the Pole to the Equator along the longitude, what la true of the variety of crops and animals? (a) Both increase (b) Both decrease (c) Variety of crops increases but that of animals decreases (d) Variety of animals increases but that of crops decreases

Description : As we move from the Pole to the Equator along the longitude, what la true of the variety of crops and animals? (a) Both increase (b) Both decrease (c) Variety of crops increases but that of animals decreases (d) Variety of animals increases but that of crops decreases

Last Answer : Ans: (a)

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

If speed of rotation of the earth increases, weight of the body will?

Description : If speed of rotation of the earth increases, weight of the body will?

Last Answer : decrease.

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Description : With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Last Answer : (B) Decreases

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Last Answer : (B) Decreases

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

As the chemical reaction proceeds, the rate of reaction(A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Last Answer : (B) Decreases

After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Description : After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Last Answer : (A) Decreases

Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Last Answer : (A) Decreases

The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Description : The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Last Answer : A) Decreases

With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Description : With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Last Answer : Option A

In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases monotonically with increase in speed. (c) is maximum at zero speed and decreases monotonically with increase in speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Description : In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases ... speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Last Answer : (d) becomes minimum at an optimum speed and then increases with further increase in speed.

If the voltage applied to a moving disk frequency meter decreases, while the applied frequency remains the same, the frequency indication will _____________. A. increase B. decrease C. remain the same D. oscillate

Description : If the voltage applied to a moving disk frequency meter decreases, while the applied frequency remains the same, the frequency indication will _____________. A. increase B. decrease C. remain the same D. oscillate

Last Answer : Answer: C

The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Description : The efficiency of Diesei cycle with decrease in cut off  (a) increases  (b) decreases  (c) remains unaffected  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : a