You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

You are flying at a constant FL 290 and a constant mach number. The total temperature  increases by 5°. The CAS will:  
a. Remain approximately constant  
b. Increase by 10 kts  
c. Decrease by 10 kts  
d. Will increase or decrease depending on whether you are above or below ISA
by

1 Answer

Answer :

a. Remain approximately constant
by

Related questions

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

What is the minimum vertical separation between IFR flights flying in the same direction below FL 290? a. 500ft b. 1000ft c. 2000ft d. 4000ft

Description : What is the minimum vertical separation between IFR flights flying in the same direction below FL 290? a. 500ft b. 1000ft c. 2000ft d. 4000ft

Last Answer : c. 2000ft

An aircraft flying over the sea between 4500ft and 9000ft AMSL and outside CAS. To continue under VFR the meteorological conditions must remain: a. 2000ft horizontally and 1000ft vertically from cloud with visibility of 8km b. 1500m horizontally and 1000ft vertically from cloud with visibility of 5km c. 1500m horizontally and 1000m vertically from cloud with visibility of 5km d. Clear of cloud and in sight of the surface with visibility of 5km

Description : An aircraft flying over the sea between 4500ft and 9000ft AMSL and outside CAS. To continue under VFR the meteorological conditions must remain: a. 2000ft horizontally and 1000ft vertically from cloud with ... visibility of 5km d. Clear of cloud and in sight of the surface with visibility of 5km

Last Answer : b. 1500m horizontally and 1000ft vertically from cloud with visibility of 5km

What is the minimum vertical separation between IFR flights flying in the same direction below FL 290? a. 500ft b. 1000ft c. 2000ft d. 4000ft

Description : What is the minimum vertical separation between IFR flights flying in the same direction below FL 290? a. 500ft b. 1000ft c. 2000ft d. 4000ft

Last Answer : c. 2000ft

Where is the 300mb level approximately in ISA? a. 30,000ft b. 39,000ft c. 18,000ft d. 10,000ft

Description : Where is the 300mb level approximately in ISA? a. 30,000ft b. 39,000ft c. 18,000ft d. 10,000ft

Last Answer : a. 30,000ft

An aircraft is travelling at 120 kts, what angle of bank would be required for a rate 1(one) turn? a. 30° b. 12° c. 18° d. 35°

Description : An aircraft is travelling at 120 kts, what angle of bank would be required for a rate 1(one) turn? a. 30° b. 12° c. 18° d. 35°

Last Answer : c. 18°

How do you calculate the lowest usable flight level? a. Lowest QNH and lowest negative temperature below ISA b. Lowest QNH and highest negative temperature below ISA c. Highest QNH and highest temperature above ISA d. Highest QNH and lowest temperature

Description : How do you calculate the lowest usable flight level? a. Lowest QNH and lowest negative temperature below ISA b. Lowest QNH and highest negative temperature below ISA c. Highest QNH and highest temperature above ISA d. Highest QNH and lowest temperature

Last Answer : a. Lowest QNH and lowest negative temperature below ISA

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

The C.O.P of a refrigeration cycle with increase in evaporator temperature, keeping condenser temperature constant, will (a) increase (b) decrease (c) remain unaffected (d) may increase or decrease depending on the type of refrigerant used

Description : The C.O.P of a refrigeration cycle with increase in evaporator temperature, keeping condenser temperature constant, will (a) increase (b) decrease (c) remain unaffected (d) may increase or decrease depending on the type of refrigerant used

Last Answer : Ans: a

If airbrakes are extended during a glide, and speed maintained, the rate of descent will: a. Increase and glide angle will be steeper b. Increase but glide angle will remain the same c. Decrease d. Remain the same

Description : If airbrakes are extended during a glide, and speed maintained, the rate of descent will: a. Increase and glide angle will be steeper b. Increase but glide angle will remain the same c. Decrease d. Remain the same

Last Answer : a. Increase and glide angle will be steeper

During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line

Description : During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line

Last Answer : c. Within 15° of runway centre-line

CAS is IAS corrected for: a. Position and instrument error b. Instrument, pressure, and density error c. Relative density only d. Compressibility

Description : CAS is IAS corrected for: a. Position and instrument error b. Instrument, pressure, and density error c. Relative density only d. Compressibility

Last Answer : a. Position and instrument error

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Last Answer : d. 300 hPa

An aircraft flying over the sea between 4500ft and 9000ft AMSL and outside CAS. To continue under VFR the meteorological conditions must remain:

Description : An aircraft flying over the sea between 4500ft and 9000ft AMSL and outside CAS. To continue under VFR the meteorological conditions must remain:

Last Answer : b. 1500m horizontally and 1000ft vertically from cloud with visibility of 5km

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

As the chemical reaction proceeds, the rate of reaction(A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Last Answer : (B) Decreases

For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Last Answer : (A) Decreases

Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Description : Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Last Answer : c. 25,000ft & 435kt

True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Description : True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Last Answer : b. FL140

If the ailerons are deflected to 10°, compared to 5°, this will cause: a. An increased angle of bank b. An increased rate of roll c. No change to either bank angle or roll rate d. A reduction in the adverse yawing moment

Description : If the ailerons are deflected to 10°, compared to 5°, this will cause: a. An increased angle of bank b. An increased rate of roll c. No change to either bank angle or roll rate d. A reduction in the adverse yawing moment

Last Answer : b. An increased rate of roll

The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Description : The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Last Answer : b. 2°/min

Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will decrease pressure below the wing and decrease drag c. An increase in angle of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Description : Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will ... of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Last Answer : c. An increase in angle of attack will increase drag

When does THRUST = DRAG? a. Climbing at a constant IAS b. Descending at a constant IAS c. Flying level at a constant IAS d. All of the above

Description : When does THRUST = DRAG? a. Climbing at a constant IAS b. Descending at a constant IAS c. Flying level at a constant IAS d. All of the above

Last Answer : c. Flying level at a constant IAS

An aircraft is flying at constant indicated altitude over a warm airmass. The altimeter reading will be: a. Correct b. Greater than the real altitude c. Less than the real altitude d. Oscillating around the correct altitude

Description : An aircraft is flying at constant indicated altitude over a warm airmass. The altimeter reading will be: a. Correct b. Greater than the real altitude c. Less than the real altitude d. Oscillating around the correct altitude

Last Answer : c. Less than the real altitude

The longitudinal separation minimum based on time between aircrafts at the same FL, where there is enough coverage for navigation aids and the preceeding aircraft has a higher true airspeed of 20kts minimum is: a. 3 minutes b. 15 minutes c. 5 minutes d. 10 minutes

Description : The longitudinal separation minimum based on time between aircrafts at the same FL, where there is enough coverage for navigation aids and the preceeding aircraft has a higher true airspeed of 20kts minimum is: a. 3 minutes b. 15 minutes c. 5 minutes d. 10 minutes

Last Answer : c. 5 minutes

The C.O.P. of a refrigeration cycle with lowering of condenser temperature, keeping the evaporator temperatureconstant, will (a) increase (b) decrease (c) may increase or decrease depending on the type of refrigerant used (d) remain unaffected

Description : The C.O.P. of a refrigeration cycle with lowering of condenser temperature, keeping the evaporator temperatureconstant, will (a) increase (b) decrease (c) may increase or decrease depending on the type of refrigerant used (d) remain unaffected

Last Answer : Ans: a

Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what and what should you do? a. Marked temperature drop; apply full power b. Loss of head wind or an increase in tail wind; apply full power c. Incipient engine failure (ignore instruments); lower the nose to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Description : Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what ... to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Last Answer : b. Loss of head wind or an increase in tail wind; apply full power

An inversion is: a. A decrease of pressure with height b. A decrease of temperature with height c. An increase of temperature with height d. An increase of pressure with height

Description : An inversion is: a. A decrease of pressure with height b. A decrease of temperature with height c. An increase of temperature with height d. An increase of pressure with height

Last Answer : c. An increase of temperature with height

Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. Altitude at which cabin pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Description : Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. ... equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Last Answer : a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter

The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Description : The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Last Answer : (B) Progressively decreases

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to remain unchanged b. The propeller control regulates the engine RPM and in turn the propeller RPM c. A high blade angle, or increased pitch, reduces the propeller drag and allows more engine power for take-offs d. As the propeller control setting is changed by the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Description : Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to ... the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Last Answer : b. The propeller control regulates the engine RPM and in turn the propeller RPM

Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Description : Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Last Answer : (A) Increases

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Description : With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Description : The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Last Answer : (A) Decreases

As the temperature of the air increases from 0 degrees C to 20 degrees C, the wavelength of a sound made by a tuning fork of fixed frequency does which of the following? Does the wavelength w) increase x) decrease y) remain the same z) increase up to a maximum, then remain constant

Description : As the temperature of the air increases from 0 degrees C to 20 degrees C, the wavelength of a sound made by a tuning fork of fixed frequency does which of the following? Does the wavelength w) increase x) decrease y) remain the same z) increase up to a maximum, then remain constant

Last Answer : ANSWER: W -- INCREASE

Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Description : Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Last Answer : b. Temperature, pressure and density decreases

You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true altitude. a. 20,660 ft b. 21,740 ft c. 18,260 ft d. 19, 340 ft

Description : You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true altitude. a. 20,660 ft b. 21,740 ft c. 18,260 ft d. 19, 340 ft

Last Answer : d. 19, 340 ft

When a radioisotope undergoes beta minus decay, does its atomic number: w) increase x) decrease y) remain the same z) vary depending on the element involved

Description : When a radioisotope undergoes beta minus decay, does its atomic number: w) increase x) decrease y) remain the same z) vary depending on the element involved

Last Answer : ANSWER: W -- INCREASE

After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Description : After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Last Answer : c. 24 min

You are testing the insulation in an AC generator with a megohmeter. The resistance value of a dry, clean winding will ____________. A. continue to rise as the test potential is maintained, becoming fairly steady as the leakage current stabilizes B. remain constant as the temperature of the windings increases C. continue to drop as the potential is maintained, becoming fairly steady after 5 to 7 minutes D. stabilize after approximately 2 to 4 minutes of fluctuation

Description : You are testing the insulation in an AC generator with a megohmeter. The resistance value of a dry, clean winding will ____________. A. continue to rise as the test potential is maintained, ... fairly steady after 5 to 7 minutes D. stabilize after approximately 2 to 4 minutes of fluctuation

Last Answer : Answer: A

With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Description : With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Last Answer : (A) Increases

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

With increase in impurities in metals, their corrosion resistances (A) Increase (B) Decrease (C) Remain same (D) May increase or decrease; depending on the type of metal

Description : With increase in impurities in metals, their corrosion resistances (A) Increase (B) Decrease (C) Remain same (D) May increase or decrease; depending on the type of metal

Last Answer : (B) Decrease

The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Description : The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Last Answer : Answer: Option D