Description : If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease
Last Answer : (1) Increases Explanation: The density of pure fresh milk being on the average 1.032, while the density of fat globules is about 0.86. It follows that the removal of cream will increase the density, while the addition of water will decrease it.
Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas
Last Answer : (B) Increases
Description : As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease
Last Answer : decreases
Description : If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease
Last Answer : (1) decreases Explanation: The weight of a body on the earth is the amount of gravitational pull on it exerted by the earth. Similarly there is another force exerted on a body on earth, that ... under the influence of the centrifugal force and the weight of the body will seem to have decreased.
Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Last Answer : (A) Decreases
Description : After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease
Last Answer : Answer: Option A
Description : If speed of rotation of the earth increases, the weight of the body (1) decreases (2) increases (3) remains the same (4) may increase or decrease
Description : The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure
Last Answer : (1) decreases Explanation: The mass density of a material varies with temperature and pressure. Increasing the temperature of a substance (with some exceptions) decreases its density by increasing the volume of ... bottom to top of the fluid due to the decrease of the density of the heated fluid.
Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition
Last Answer : (B) Decreases
Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance
Last Answer : (C) Remains unchanged
Description : The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material
Last Answer : (B) Progressively decreases
Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine
Description : As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable
Last Answer : (C) Increases
Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate
Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system
Description : With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature
Last Answer : (A) Increases
Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid
Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid
Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance
Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas
Last Answer : C) Remains unchanged
Description : In an isothermal process, the internal energy of gas molecules (a) increases (b) decreases (c) remains constant (d) may increase/decrease depending on the properties of gas (e) shows unpredictable behaviour.
Last Answer : Answer : c
Description : Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.
Last Answer : ANSWER : A
Description : Feeding of milk cattle with cotton seeds (a) Increases fat content temporarily (b) Decreases fat content temporarily (c) May decrease or increase fat content (d) Causes no change in fat content
Last Answer : Ans:(a)
Description : If a metallic object is heated, its density generally: w) increases x) decreases y) fluctuates randomly z) remains the same
Last Answer : ANSWER: X -- DECREASES
Description : . In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases
Description : With increase in pump speed, its NPSH requirement (A) Decreases (B) Increases (C) Remains unaltered (D) Can either increase or decrease; depends on other factors
Description : How the interest-level of a country is affected by FDI? (1) increases (2) decreases (3) remains unaffected (4) there is increase or decrease
Last Answer : (2) decreases Explanation: A higher international interest rate will decrease FDI since it means a higher cost of fund in international market, and vice versa. Interest rate is a measure of the cost of capital ... to a decrease in FDI. Interest rate and FDI can both be the cause and effect of other.
Description : With increases in pressure, the conversion of Ammonium carbamate into urea (A) Increases (B) Decreases (C) Remains unaltered (D) Can either increase or decrease depends on biuret content
Description : How the interest-level of a country is affected by FDI ? (1) increases (2) decreases (3) remains unaffected (4) there is increase or decrease
Description : When water freezes its density – (1) Decreases (2) Becomes Zero (3) Remains constant (4) Increases
Last Answer : (1) Decreases Explanation: Water at ordinary temperatures contracts and in-creases in density as it is cooled, like most substances. But at about 4°C it reaches a maximum density and then decreases in density as it approaches the freezing point. This is referred to as anomalous property of water.
Description : When water freezes its density (1) Decreases (2) Becomes Zero (3) Remains constant (4) Increases
Last Answer : Decreases
Description : In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases d)Increases
Last Answer : In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases ... B. may increase or decrease C. increases D. decreases
Description : In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c)Decreases d)Increases
Last Answer : In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c) ... off decrease B. remains constant C. decreases D. increases
Description : With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero
Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.
Description : With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero
Description : Which of the following statements is true? (a) Both salinity and density of sea increase with depth (b) Both salinity and density of sea decrease with depth (c) Salinity increase but density of sea deceases with depth (d) Salinity decreases but density of sea increases with depth
Last Answer : Ans:(d)
Description : The density of sea water increase as (a) depth and salinity decrease (b) depth decreases and salinity increases (c) depth increases and salinity decreases (d) depth and salinity increase
Description : With the increase in the amount of compaction energy (A) Optimum water content increases but maximum dry density decreases (B) Optimum water content decreases but maximum dry density increases ( ... and maximum dry density increase (D) Both optimum water content and maximum dry density decrease
Last Answer : Answer: Option B
Description : When the compaction energy increases the compaction of soils: (a) Both of OMC and maximum dry density decrease (b) Both of OMC and maximum dry density increase (c) OMC decreases but maximum dry density decrease (c) OMC increases but maximum dry density increase
Last Answer : (c) OMC decreases but maximum dry density decrease
Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease
Last Answer : (C) Decreases
Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system
Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas
Description : With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel
Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel
Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate
Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease
Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction
Description : After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of