Compound which is used in the process of manufacturing cement?

Compound which is used in the process of
manufacturing cement?
by

1 Answer

Answer :

Limestone
by

Related questions

Which of the following industrial process uses waste as a fuel? a) Cement kilns b) Lead manufacturing c) Acid manufacturing d) Sulphur manufacturing

Description : Which of the following industrial process uses waste as a fuel? a) Cement kilns b) Lead manufacturing c) Acid manufacturing d) Sulphur manufacturing

Last Answer : Cement kilns

Describe the wet process of manufacturing of cement

Description : Describe the wet process of manufacturing of cement 

Last Answer : Various stages in wet process of manufacturing of cement: The manufacturing of cement by wet process can be divided into three stages. Stage-I Mixing of raw materials: In this stage, 10% of chalk and ... ground cement is stored in silos. It is then weighed and packed in bags of50kg by weight.  

Draw the flow chart of manufacturing of cement by wet process.

Description : Draw the flow chart of manufacturing of cement by wet process.

Last Answer : Flow chart of manufacturing of cement by wet process.  

Answer the following briefly in not more than 30 words. Name the important raw materials used in the manufacturing of cement. -SST 10th

Description : Answer the following briefly in not more than 30 words. Name the important raw materials used in the manufacturing of cement. -SST 10th

Last Answer : Cement is an essential raw material for the for construction of buildings, factories, bridges, roads, airports, dams and for other commercial establishments. The cement industries use bulky and heavy raw materials like limestone, silica, alumina and gypsum.

Name the important raw materials used in the manufacturing of cement? -Geography

Description : Name the important raw materials used in the manufacturing of cement? -Geography

Last Answer : Limestone, silica, alumina, and gypsum are important raw materials used in the manufacturing of cement.

Bagasse, a by-product of sugar manufacturing industry, is used for the production of - (1) Glass (2) Paper (3) Rubber (4) Cement

Description : Bagasse, a by-product of sugar manufacturing industry, is used for the production of - (1) Glass (2) Paper (3) Rubber (4) Cement

Last Answer : (2) Paper

An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the (A) Manufacturing cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Description : An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from ... cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Last Answer : (B) Depreciation by sinking fund method

Compound which is regulating the set- ting time of cement?

Description : Compound which is regulating the set- ting time of cement?

Last Answer : Gypsum

The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Description : In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Last Answer : Answer: Option A

To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Description : To retard the initial setting time of cement, the compound responsible, is (A) Tri-calcium silicate (B) Gypsum (C) Di-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Description : The first compound which reacts with water when mixed with cement is (a) Tricalcium Aluminate (b) Tricalcium silicate (c) Di-calcium silicate (d) Teracalcium aluminate

Last Answer : (a) Tricalcium Aluminate

Which compound in cement, gives early age strength (a) C3S (b) C2S (c) C3A (d) C4AF

Description : Which compound in cement, gives early age strength (a) C3S (b) C2S (c) C3A (d) C4AF

Last Answer : (a) C3S

Which of the following compounds is considered to be an undesirable compound for cement [ A ] C3S [ B ] C2S [ C ] C3A [ D ] C4AF

Description : Which of the following compounds is considered to be an undesirable compound for cement [ A ] C3S [ B ] C2S [ C ] C3A [ D ] C4AF

Last Answer : [ D ] C4AF

Manufacturing food by the process of photosynthesis in plants is an example of (a) Anabolism (b) Catabolism (c) Both anabolism and catabolism (d) Neither anabolism nor catabolism

Description : Manufacturing food by the process of photosynthesis in plants is an example of (a) Anabolism (b) Catabolism (c) Both anabolism and catabolism (d) Neither anabolism nor catabolism

Last Answer : Ans:(a)

Manufacturing process of Aluminium is?

Description : Manufacturing process of Aluminium is?

Last Answer : Hall Heroult Process

In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : c.Fixed-position layout

____ is the bridge between design and manufacturing a.Production planning b.Process Planning c.Product design d.None of the above

Description : ____ is the bridge between design and manufacturing a.Production planning b.Process Planning c.Product design d.None of the above

Last Answer : b.Process Planning

In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Last Answer : d.Both A & B

In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Description : In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Last Answer : c.Process layout

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

Give a flow chart which shows the process of manufacturing aluminium. -SST 10th

Description : Give a flow chart which shows the process of manufacturing aluminium. -SST 10th

Last Answer : Process of Manufacturing in Aluminium Industry

What is the manufacturing process of butane gas?

Description : What is the manufacturing process of butane gas?

Last Answer : Butane comes from natural gas and can also be found in petroleum. The Manufacturing process involves the separation of gas from the oil where it dissolved, often using equipment installed near the source of the gas pocket.

The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is

Description : The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is

Last Answer : The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is A. `H_(2)SO_(4)` (conc.) ... (dil) C. HCl D. `H_(2)S_(2)O_(7)`

How long did it take Goodyear to perfect the process of manufacturing rubber?

Description : How long did it take Goodyear to perfect the process of manufacturing rubber?

Last Answer : Need answer

Does outsourcing your business process to external comanies always mean outsourcing the actual manufacturing of products or provision of services?

Description : Does outsourcing your business process to external comanies always mean outsourcing the actual manufacturing of products or provision of services?

Last Answer : I work for a service company that outsources a lot of work to India. The representatives in India will take phone calls from customers, process claims or other functions, or just about anything. ... such as payroll, employee benefits, accounting, and customer service (no joke on that last one).

The manufacturing of iron from ironore involves the process of - (1) Oxidation (2) Reduction (3) Electrolysis (4) Fractional distillation

Description : The manufacturing of iron from ironore involves the process of - (1) Oxidation (2) Reduction (3) Electrolysis (4) Fractional distillation

Last Answer : (2) Reduction Explanation: Iron is extracted from iron ore in a huge container called a blast furnace. Iron ores such as hematite contain iron oxide. The oxygen must be removed from the iron oxide to leave the iron behind. Reactions in which oxygen is removed are called reduction reactions.

Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Description : Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Last Answer : D. Rayleigh scattering loss

Cast irons are generally specified by their (A) Carbon content (B) Tensile strength (C) Hardness (D) Manufacturing process

Description : Cast irons are generally specified by their (A) Carbon content (B) Tensile strength (C) Hardness (D) Manufacturing process

Last Answer : (B) Tensile strength

What part of the manufacturing process relate to each stage of the process and to the process as a whole? a) field service b) design c) distribution d) project management

Description : What part of the manufacturing process relate to each stage of the process and to the process as a whole? a) field service b) design c) distribution d) project management

Last Answer : d) project management

Which stage of the manufacturing process has been described as “the mapping of function onto form”? a) Design b) Distribution c) Project management d) Field service

Description : Which stage of the manufacturing process has been described as “the mapping of function onto form”? a) Design b) Distribution c) Project management d) Field service

Last Answer : a) Design

Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Last Answer : (A) Sintering

In a chemical process plant, the total product cost comprises of manufacturing cost and the (A) General expenses (B) Overhead cost (C) R & D cost (D) None of these

Description : In a chemical process plant, the total product cost comprises of manufacturing cost and the (A) General expenses (B) Overhead cost (C) R & D cost (D) None of these

Last Answer : (A) General expenses

Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General expenses = administrative expenses + distribution & marketing expenses (C) Total product cost = manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Description : Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General ... manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Last Answer : (D) Total product cost = direct production cost + plant overhead cost

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

66. The energy used by any manufacturing process varies with a) Production volume b) Type of process c) Resource input d) All the above

Description : 66. The energy used by any manufacturing process varies with a) Production volume b) Type of process c) Resource input d) All the above

Last Answer : All the above

The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Description : The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Last Answer : Energy management

What is one of the most important parts of any transistor manufacturing process?

Description : What is one of the most important parts of any transistor manufacturing process?

Last Answer : Quality control.

A layout is an arrangement arrangement based on the sequence sequence of operations operations that are performed performed during the manufacturing of a good or the delivery of a service. a. Group b. Process c. Product d. Fixed position

Description : A layout is an arrangement arrangement based on the sequence sequence of operations operations that are performed performed during the manufacturing of a good or the delivery of a service. a. Group b. Process c. Product d. Fixed position

Last Answer : b. Process

Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Description : Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Last Answer : (a) during the manufacturing process

Which of the items listed below is not one of the software engineering layers? (A) Process (B) Manufacturing (C) Methods (D) Tools

Description : Which of the items listed below is not one of the software engineering layers? (A) Process (B) Manufacturing (C) Methods (D) Tools

Last Answer : (B) Manufacturing

In _________, machines and equipments are arranged in the order or sequence in which they are to be used for manufacturing the product A. Factory Layout. B. Product Layout. C. Process Layout. D. Combined Layout.

Description : In _________, machines and equipments are arranged in the order or sequence in which they are to be used for manufacturing the product A. Factory Layout. B. Product Layout. C. Process Layout. D. Combined Layout.

Last Answer : B. Product Layout.

Describe the process of manufacturing of hard gelatine capsules.

Description : Describe the process of manufacturing of hard gelatine capsules. 

Last Answer : Process of manufacturing of hard gelatine capsules.   i)Capsules are filled in the loading tray& placed over the filling bed. ii) Cam handle is operated to separate the capsule caps from their ... cleaned by wiping with clean cloth. This gives good shine to the capsules. Diagram

Explain the manufacturing process of hydraulic lime.

Description : Explain the manufacturing process of hydraulic lime. 

Last Answer : 1. Burning of impure limestone / kankar containing clay containing less than 30 %. With coal or charcoal as fuel. 2. If soft limestone is used, it is powdered, mixed with clay in right proportion & ... long as it is protected from air & moisture. After slaking it should be used within a week. 

Apply proper heat treatment process for manufacturing connecting rod of an engine.

Description : Apply proper heat treatment process for manufacturing connecting rod of an engine. 

Last Answer : Answer: The connecting rod may either be cast or forged when created and may also include allowable secondary alloy elements.  The normalizing step includes heating a rough connecting rod to ... , not throughout the entire rod, but instead only where high hardness is required functionally.

A manufacturing company has divided its departments into pattern making, fabric cutting, and fabric coloring. What type of departmentalization is this? (a) Geography Departmentalization ; (b) Process Departmentalization (c) Matrix/Project Departmentalization ; (d) Function Departmentalization

Description : A manufacturing company has divided its departments into pattern making, fabric cutting, and fabric coloring. What type of departmentalization is this? (a) Geography Departmentalization ; (b) Process Departmentalization (c) Matrix/Project Departmentalization ; (d) Function Departmentalization

Last Answer : (b) Process Departmentalization