Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Heat is generated in a nuclear reactor (thermal) by
(A) Combustion of a nuclear fuel e.g. uranium
(B) Fusion of atoms of uranium
(C) Absorption of neutrons in uranium atoms
(D) Fission of U-235 by neutrons
by

1 Answer

Answer :

(D) Fission of U-235 by neutrons
by

Related questions

Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Description : Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Last Answer : (C) 3

A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Description : A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Last Answer : (A) Uses slower neutrons for fission

A fast reactor uses: w) an extremely short time to get to the maximum operating reactivity. x) uranium-235 as fuel. y) heavy water as a coolant. z) essentially unmoderated neutrons.

Description : A fast reactor uses: w) an extremely short time to get to the maximum operating reactivity. x) uranium-235 as fuel. y) heavy water as a coolant. z) essentially unmoderated neutrons.

Last Answer : ANSWER: Z -- ESSENTIALLY UNMODERATED NEUTRONS.

Fuel' can be defined as a substance which produces heat by (A) Combustion (B) Nuclear fission (C) Nuclear fusion (D) All (A), (B) & (C)

Description : Fuel' can be defined as a substance which produces heat by (A) Combustion (B) Nuclear fission (C) Nuclear fusion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

Thermal neutrons which are used to cause the fission of U-235 haveenergy __________ eV.(A) < 0.025(B) > 1(C) 1-25(D) > 200

Description : Thermal neutrons which are used to cause the fission of U-235 haveenergy __________ eV. (A) < 0.025 (B) > 1 (C) 1-25 (D) > 200

Last Answer : (A) < 0.025

In a breeder reactor, new fuel is formed as non-fuel uranium-238 absorbs a neutron and ultimately becomes which of the following fissionable atoms: w) uranium-235 x) plutonium-239 y) uranium-239 z) neptunium-239

Description : In a breeder reactor, new fuel is formed as non-fuel uranium-238 absorbs a neutron and ultimately becomes which of the following fissionable atoms: w) uranium-235 x) plutonium-239 y) uranium-239 z) neptunium-239

Last Answer : ANSWER: X -- PLUTONIUM-239

Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Description : Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Last Answer : (A) Natural uranium fuelled heavy water cooled & moderated

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

A reaction develop nuclear energy at the rate of `3 xx 10^(4) kW`. How many atoms of `.^(215)U` undergo fission per second? How much `.^(235)U` is bur

Description : A reaction develop nuclear energy at the rate of `3 xx 10^(4) kW`. How many atoms of `.^(215)U` undergo fission per second? How much `.^(235)U` is bur

Last Answer : A reaction develop nuclear energy at the rate of `3 xx 10^(4) kW`. How many atoms of `.^(215)U` ... constant is `6.023 xx 10^(26)` per kg mole)

Most of the new atoms formed when atoms in a nuclear reactor capture neutrons without fissioning are: w) fission products x) activation products y) actinides z) lead isotopes

Description : Most of the new atoms formed when atoms in a nuclear reactor capture neutrons without fissioning are: w) fission products x) activation products y) actinides z) lead isotopes

Last Answer : ANSWER: Y -- ACTINIDES

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Nuclear fission of one atom of uranium-235 produces the energy equivalent to about __________ MeV. (A) 20 (B) 200 (C) 500 (D) 2000

Description : Nuclear fission of one atom of uranium-235 produces the energy equivalent to about __________ MeV. (A) 20 (B) 200 (C) 500 (D) 2000

Last Answer : (B) 200

Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C

Description : Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C

Fuel for a nuclear reactor (thermal) is(A) Uranium(B) Plutonium(C) Radium(D) None of these

Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Last Answer : (A) Uranium

Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Last Answer : (A) Uranium

A uranium nucleus `.^(235)U` liberates 200 MeV per fission 1.5 kg of uranium reacts during explosion of a uranium bomb. What is the mass of an equival

Description : A uranium nucleus `.^(235)U` liberates 200 MeV per fission 1.5 kg of uranium reacts during explosion of a uranium bomb. What is the mass of an equival

Last Answer : A uranium nucleus `.^(235)U` liberates 200 MeV per fission 1.5 kg of uranium reacts during explosion of a uranium ... TNT is `4.1 xx 10^(6) J//kg` ?

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

The principle behind a breeder reactor is: w) U-235 undergoes fission. x) U-238 is converted to Pu-239, which undergoes fission. y) Deuterium undergoes fission. z) Cobalt-60 undergoes fission.

Description : The principle behind a breeder reactor is: w) U-235 undergoes fission. x) U-238 is converted to Pu-239, which undergoes fission. y) Deuterium undergoes fission. z) Cobalt-60 undergoes fission.

Last Answer : ANSWER: X -- U-238 IS CONVERTED TO Pu-239, WHICH UNDERGOES FISSION. 

Velocity of the thermal neutron (< 0.025 eV) used for fission of U-235 is around __________ m/sec. (A) 1 (B) 2200 (C) 3 × 10 11 (D) 9 × 10 21

Description : Velocity of the thermal neutron (< 0.025 eV) used for fission of U-235 is around __________ m/sec. (A) 1 (B) 2200 (C) 3 × 10 11 (D) 9 × 10 21

Last Answer : (B) 2200

The phenomenon of nuclear fission is opposite to that of (A) Radioactive decay (B) Thermionic emission (C) Nuclear fusion (D) Combustion

Description : The phenomenon of nuclear fission is opposite to that of (A) Radioactive decay (B) Thermionic emission (C) Nuclear fusion (D) Combustion

Last Answer : (C) Nuclear fusion

Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Description : Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Last Answer : (1) Boron Explanation: Boron shielding is used as a control for nuclear reactors, taking advantage of its high cross-section for neutron capture. Elemental boron is rare and ... aluminium. Crystalline boron is chemicallyinert and resistant to attack by boiling hydrofluoric or hydrochloric acid.

wo elements which are used to absorb neutrons to control the chain reaction during nuclear fission are - (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Description : wo elements which are used to absorb neutrons to control the chain reaction during nuclear fission are - (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Last Answer : (1) Boron and Cadmium Explanation: Since the continued chain reaction of a nuclear fission reactor depends upon at least one neutron from each fission being absorbed by another fissionable nucleus, the ... and then the control rods are slowly lifted until a chain reaction can just be sustained.

Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission ? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Description : Which of the following can be used to absorb neutrons to control the chain reaction during nuclear fission ? (1) Boron (2) Heavy water (3) Uranium (4) Plutonium

Last Answer : Boron

Two elements which are used to absorb neutrons to control the chain reaction during nuclear fission are (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Description : Two elements which are used to absorb neutrons to control the chain reaction during nuclear fission are (1) Boron and Cadmium (2) Boron and Plutonium (3) Cadmium and Uranium (4) Uranium and Boron

Last Answer :  Boron and Cadmium

The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) Emission of hazardous radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission

Atoms of U-238 and U-235 differ in structure by three (A) Electrons and three protons (B) Protons (C) Neutrons (D) Electrons

Description : Atoms of U-238 and U-235 differ in structure by three (A) Electrons and three protons (B) Protons (C) Neutrons (D) Electrons

Last Answer : (C) Neutrons

U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85(B) 50 (C) 3 (D) 97

Description : U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85 (B) 50 (C) 3 (D) 97

Last Answer : (C) 3

A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Description : A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Last Answer : (C) The fuel and the moderator is mixed to form a homogeneous material

Energy is continuously generated in the sun due to _______. (1) Nuclear fusion (2) Nuclear fission (3) Radioactivity (4) Artificial radioactivity

Description : Energy is continuously generated in the sun due to _______. (1) Nuclear fusion (2) Nuclear fission (3) Radioactivity (4) Artificial radioactivity

Last Answer : (1) Nuclear fusion Explanation: Nuclear fusion is a nuclear reaction in which two or more atomic nuclei come very close and then collide at a very high speed and join to form a new type of atomic nucleus.

The number of neutrons accompanying the formationof 54Xe139 and 38Sr94from the absorption of a slow neutron by 92U235,followed by nuclear fission is(A) 1(B) 2(C) 3(D) 4

Description : The number of neutrons accompanying the formationof 54Xe 139 and 38Sr 94 from the absorption of a slow neutron by 92U235 , followed by nuclear fission is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (C) 3

Atomic power plant works on the principle of – (1) Fission (2) Fusion (3) Thermal combustion (4) Combined effect of all the above three

Description : Atomic power plant works on the principle of – (1) Fission (2) Fusion (3) Thermal combustion (4) Combined effect of all the above three

Last Answer : (1) Fission Explanation: A nuclear power plant is a facility at which energy released by the fissioning of atoms is converted to electrical energy under strictly regulated operating conditions. The major ... power plants except that the coal or oil fired boiler is replaced by a nuclear reactor.

Atomic power plant works on the principle of (1) fission (2) fusion (3) thermal combustion (4) combined effect of all the above three

Description : Atomic power plant works on the principle of (1) fission (2) fusion (3) thermal combustion (4) combined effect of all the above three

Last Answer : fission

The number of neutrons accompanying the formation of `._(54)Xe^(139)` and `._(38)Sr^(94)` from the absorption of a slow neutron by `._(92)U^(235)`, fo

Description : The number of neutrons accompanying the formation of `._(54)Xe^(139)` and `._(38)Sr^(94)` from the absorption of a slow neutron by `._(92)U^(235)`, fo

Last Answer : The number of neutrons accompanying the formation of `._(54)Xe^(139)` and `._(38)Sr^(94)` from the ... `._(92)U^(235)`, followed by nuclear fission is

Because uranium 235 isn't found naturally in large quantities, engineers increase its concentration in nuclear fuel so that a chain reaction is more likely to occur. What is the name of this process?

Description : Because uranium 235 isn't found naturally in large quantities, engineers increase its concentration in nuclear fuel so that a chain reaction is more likely to occur. What is the name of this process?

Last Answer : Enrichment

What process produces most of the energy that is radiated by the Sun? w) gravitational contraction x) chemical combustion y) nuclear fusion z) nuclear fission

Description : What process produces most of the energy that is radiated by the Sun? w) gravitational contraction x) chemical combustion y) nuclear fusion z) nuclear fission

Last Answer : ANSWER: Y -- NUCLEAR FUSION

A nuclear reactor harnesses nuclear energy by A. Nuclear fusion B. Spontaneous fission C. Uncontrolled chain reaction D. Controlled chain reaction

Description : A nuclear reactor harnesses nuclear energy by A. Nuclear fusion B. Spontaneous fission C. Uncontrolled chain reaction D. Controlled chain reaction

Last Answer : ANSWER: D

The reaction `._(92)U^(235) + ._(0)n^(1) rarr ._(56)Ba^(140) + ._(36)Kr^(93) + 3 ._(0)n^(1)` represents a)Artificial radioactivity b)Nuclear fission c

Description : The reaction `._(92)U^(235) + ._(0)n^(1) rarr ._(56)Ba^(140) + ._(36)Kr^(93) + 3 ._(0)n^(1)` represents a)Artificial radioactivity b)Nuclear fission c

Last Answer : The reaction `._(92)U^(235) + ._(0)n^(1) rarr ._(56)Ba^(140) + ._(36)Kr^( ... radioactivity B. nuclear fission C. nuclear fussion D. none of the above

The part of the nuclear reactor that controls the speed of neutrons released during nuclear fission is

Description : The part of the nuclear reactor that controls the speed of neutrons released during nuclear fission is

Last Answer : moderator.

Radioactive isotope of Uranium used in Nuclear Bomb is ? A.92 U 235 (Answer) B.92 U 234 C. 92 U 233 D. 92 U 238

Description : Radioactive isotope of Uranium used in Nuclear Bomb is ? A.92 U 235 (Answer) B.92 U 234 C. 92 U 233 D. 92 U 238

Last Answer : A.92 U 235 (Answer)

A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Calculate the energy released by fission of 1 g of `._(92)^(235)U`, assuming that an energy of 200 MeV is released by fission of each atom of `.^(235)

Description : Calculate the energy released by fission of 1 g of `._(92)^(235)U`, assuming that an energy of 200 MeV is released by fission of each atom of `.^(235)

Last Answer : Calculate the energy released by fission of 1 g of `._(92)^(235)U`, assuming that an energy of 200 MeV is ... `= 6.023 xx 10^(26) kg mol^(-1)`)

An atomic pile is used for – (1) producing X-rays (2) conducting nuclear fission (3) coducting thermonuclear fusion (4) accelerating atoms

Description : An atomic pile is used for – (1) producing X-rays (2) conducting nuclear fission (3) coducting thermonuclear fusion (4) accelerating atoms

Last Answer : (2) conducting nuclear fission Explanation: An atomic pile is a nuclear reactor that uses controlled nuclear fission to generate energy. The most common reactor consists of a large assembly of graphite (an allotropic form of carbon) blocks having rods of uranium metal (fuel).

An atomic pile is used for (1) producing X-rays (2) conducting nuclear fission (3) coducting thermonuclear fusion (4) accelerating atoms

Description : An atomic pile is used for (1) producing X-rays (2) conducting nuclear fission (3) coducting thermonuclear fusion (4) accelerating atoms

Last Answer :  conducting nuclear fission

Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Description : Thorium-232 is converted into uranium-233 in a/an __________ nuclear reactor. (A) Thermal (B) Fast breeder (C) Heavy water moderated (D) Enriched uranium

Last Answer : (B) Fast breeder

Which type of Uranium is used in the fission process? A. Uranium – 234 B. Uranium - 235 C. Uranium - 236 D. Uranium - 237

Description : Which type of Uranium is used in the fission process? A. Uranium – 234 B. Uranium - 235 C. Uranium - 236 D. Uranium - 237

Last Answer : ANSWER: B

Which type of Uranium is used in the fission process? A. Uranium – 234 B. Uranium - 235 C. Uranium - 236 D. Uranium - 237

Description : Which type of Uranium is used in the fission process? A. Uranium – 234 B. Uranium - 235 C. Uranium - 236 D. Uranium - 237

Last Answer : ANSWER: B

Which type of Uranium is used in the fission process? A. Uranium – 234 B. Uranium - 235 C. Uranium - 236 D. Uranium - 237

Description : Which type of Uranium is used in the fission process? A. Uranium – 234 B. Uranium - 235 C. Uranium - 236 D. Uranium - 237

Last Answer : ANSWER: B

Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is scarce (C) It is difficult to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Description : Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is ... to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Last Answer : (A) It is difficult to control nuclear fusion reaction