Which of the following is an elastomer?
(A) Thiokol
(B) Phenol formaldehyde
(C) Urea formaldehyde
(D) Polystyrene

1 Answer

Answer :

(A) Thiokol

Related questions

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

Description : Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Last Answer : (C) Urea formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

Description : Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Last Answer : (A) Polybutadiene

Description : Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Last Answer : (A) Polysulphide rubber

Description : Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Last Answer : Answer: Option B

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Last Answer : (C) Polychlorophrene

Description : Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine

Last Answer : (D) Melamine

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Last Answer : (C) Polytetrafluroethylene (PTFE)

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermoset phenol formaldehyde

Description : __________ is never shipped in glass carboys. (A) Ammonia (B) Acetic acid (C) Phenol (D) Formaldehyde

Last Answer : (A) Ammonia

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Description : Phenol formaldehyde resin is used as an adhesive in making (A) Laminates (B) Card boxes (C) Furniture (D) Books

Last Answer : (A) Laminates

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Last Answer : (C) Polychlorophrene

Description : Fourdrinier machine is used in the manufacture of (A) Sugar (B) Paper (C) Alcohol from molasses (D) Phenol formaldehyde

Last Answer : (B) Paper

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Last Answer : (D) Phenol

Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Last Answer : (D) Urea-formaldehyde resins

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Last Answer : (B) Amino

Description : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is an exmaple of:

Last Answer : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is ... C. free radical reaction D. aldol reaction

Description : Bakelite is a copolymer of Phenol and - (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Last Answer : (1) Formaldehyde Explanation: Bakelite is an early plastic. It is a thermosetting phenol formaldehyde resin, formed from an elimination reaction of phenol with formaldehyde.

Description : Write the polymer of phenol and formaldehyde that is used for making combs.

Last Answer : Ans: Bakelite, (a) Phenol (b) Formaldehyde 

Description : Natural rubber is a polymer of (a) Propene (b) Isoprene (c) Formaldehyde (d) Phenol

Last Answer : Isoprene

Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Last Answer : Phenol and formaldehyde

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

Description : Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D

Description : Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Last Answer : (B) bakelite.

Description : Give the applications of phenol formaldehyde resin.

Last Answer : 1) For making electric insulator parts like switches, plugs, switchboards, heater-hands, sockets for light bulb, etc. and in wire insulation. 2) Used for making moulded articles like telephone parts, ... ) In paints and varnishes. 7) It is used as hydrogen- exchanger resin in water softening.

Description : Bakelite is a copolymer of Phenol and (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Last Answer : Formaldehyde

Description : Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite ... prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Last Answer : Answer: Option D

Description : Write four properties and four applications of urea formaldehyde resin.

Last Answer : Properties: 1) The bond film produced by Urea - Formaldehyde resin is quite rigid & transparent. 2) It is good resistant to moisture, insects & fungi. 3) However action of acids & alkalies ... 3) Used as bonding articles in aircraft. 4) Used as bonding articles in ship building industries etc.

Description : __________ is produced by polymerisation of chloroprene. (A) Thiokol (a polysulphide rubber) (B) Butyl rubber (C) Neoprene (D) Polyurethane rubber

Last Answer : (C) Neoprene

Description : Buna-N is also called (A) Butyl rubber (B) Nitrile rubber (C) Neoprene (D) Thiokol

Last Answer : (B) Nitrile rubber

Description : Poly-methyl-methacrylate, which is an acrylic resin, is also called (A) Thiokol (B) Plexiglass or Lucite (C) Dacron (D) Teflon

Last Answer : (B) Plexiglass or Lucite

Description : Antioxidants are added to rubber to protect it from the attack of light, heat & atmospheric ozone. Which of the following is an antioxidant used in rubber? (A) Carbon (B) Alkylated diphenyl amine (C) Thiokol (D) Magnesium

Last Answer : (B) Alkylated diphenyl amine