A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of (A) Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

A chain growth polymerisation reaction consists of three different types
of reaction namely initiation reaction, propagation reaction & termination
reaction. Chain growth polymerisation reaction is not involved in the
manufacture of
(A) Siloxane elastomers
(B) Polyamides
(C) Vinyl polymers
(D) Urea-formaldehyde resins
by

1 Answer

Answer :

(D) Urea-formaldehyde resins
by

Related questions

In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

__________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Last Answer : (B) Amino

.In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Description : .In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Last Answer : (a) Termination

In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Description : In protein synthesis, the polymerisation of amino acids involves three steps. Which one of the following is not involved in the polymerisation of protein ? (a) Termination (b) Initiation (c) Elongation (d) Transcription

Last Answer : Transcription

The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Last Answer : (C) Initial hydrolysis of silicone monomer

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Description : Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Last Answer : (A) Melamine resins

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Description : Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Last Answer : (C) Urea formaldehyde

Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Last Answer : C) Teflon is formed by step growth polymerisation

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Description : Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Last Answer : (A) Polybutadiene

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Which of the following types of polymers has the strongest inter particle forces? (A) Elastomers (B) Fibres (C) Thermoplastics (D) Thermosetting polymers

Description : Which of the following types of polymers has the strongest inter particle forces? (A) Elastomers (B) Fibres (C) Thermoplastics (D) Thermosetting polymers

Last Answer : (D) Thermosetting polymers

The ‘rho’ (ρ) factor is involved (A) To increase the rate of RNA synthesis (B) In binding catabolite repressor to the promoter region (C) In proper termination of transcription (D) To allow proper initiation of transcriptide

Description : The ‘rho’ (ρ) factor is involved (A) To increase the rate of RNA synthesis (B) In binding catabolite repressor to the promoter region (C) In proper termination of transcription (D) To allow proper initiation of transcriptide

Last Answer : Answer : C

Which one of the following polymers is widely used for making bullet proof material? (1) Polyvinyl chloride (2) Polyamides (3) Polyethylene (4) Polycarbonates

Description : Which one of the following polymers is widely used for making bullet proof material? (1) Polyvinyl chloride (2) Polyamides (3) Polyethylene (4) Polycarbonates

Last Answer : (4) Polycarbonates Explanation: Ballistic nylon was the standard cloth used for bulletproof vests until the 1970s. In 1965, Stephanie Kwolek, a chemist at Du Pont, invented Kevlar, trademark ... terephthalamide, a liquid polymer that can be spun into aramid fiber and woven into cloth.

Proteins are (a) polyamides (b) Polymers of ethylene (c) α-Aminocarboxylic acids (d) Polymers of propylene

Description : Proteins are (a) polyamides (b) Polymers of ethylene (c) α-Aminocarboxylic acids (d) Polymers of propylene

Last Answer : polyamides

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Last Answer : (B) Polythene

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of theseThermosetting resins are those polymers, which(A) Do not increase in plasticity with rise in temperature(B) Allow slip to occur between molecules(C) Do not take on a permanent set(D) None of these

Description : Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of these

Last Answer : (A) Do not increase in plasticity with rise in temperature

Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Description : Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Last Answer : (C) Easily deform under pressure at high temperature

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine

Description : Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine

Last Answer : (D) Melamine

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Description : Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Last Answer : (A) Melamine formaldehyde resin

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids

Description : Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids

Last Answer : (C) Proteins

Nonsense codons bring about (A) Amino acid activation (B) Initiation of protein synthesis (C) Termination of protein synthesis (D) Elongation of polypeptide chains

Description : Nonsense codons bring about (A) Amino acid activation (B) Initiation of protein synthesis (C) Termination of protein synthesis (D) Elongation of polypeptide chains

Last Answer : Answer : C

In pKO1 plasmid, galactose kinase gene is a reporter gene which lacks ___________ gene. a. Initiation codon b. Promoter c. Activator d. Termination

Description : In pKO1 plasmid, galactose kinase gene is a reporter gene which lacks ___________ gene. a. Initiation codon b. Promoter c. Activator d. Termination

Last Answer : b. Promoter

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Description : Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Last Answer : Answer: Option D

Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Description : Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Last Answer : (C) Propylene

Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Last Answer : (A) 50000

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Which one among the following is not removed as a waste product from the body of a plant? (a) Resins and Gums (b) Urea (c) Dry Leaves (d) Excess Water

Description : Which one among the following is not removed as a waste product from the body of a plant? (a) Resins and Gums (b) Urea (c) Dry Leaves (d) Excess Water

Last Answer : Answer: (b)

Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Description : Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Last Answer : (A) Thiokol

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate (C) Biuret (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total ... (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Last Answer : (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate

Project management consists of interacting processes namely ____, ____, process interactions, and ____ which are organised in groups.

Description : Project management consists of interacting processes namely ____, ____, process  interactions, and ____ which are organised in groups.

Last Answer : Ans. Project processes, process groups, customisation