Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material
Last Answer : (B) Employs condensation polymerisation
Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66
Last Answer : (B) Bakelite
Description : Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine
Last Answer : (D) Melamine
Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde
Last Answer : (B) Phenol & formaldehyde
Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved
Last Answer : (C) The monomers contain two functional groups
Description : Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron
Last Answer : (A) Polybutadiene
Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer
Last Answer : (C) Polytetrafluroethylene (PTFE)
Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer
Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)
Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides
Last Answer : (A) Cross linked polystyrene
Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic
Last Answer : (B) Amino
Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol
Last Answer : (D) Phenol
Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction
Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction
Description : Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these
Last Answer : Answer: Option D
Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation
Last Answer : C) Teflon is formed by step growth polymerisation
Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these
Last Answer : (A) Addition polymerisation product
Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these
Last Answer : (A) Addition
Description : Differentiate between addition and condensation polymerisation process with suitable examples.
Last Answer : Addition polymerization Condensation polymerization 1)the polymerization reaction involves the joining of unsaturated monomers by breaking of bonds in a chain like manner without loss of any by ... thermosetting polymers Example: pvc(poly vinyl chloride) Example: formaldehyde
Description : Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk
Last Answer : (C) Solution
Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these
Last Answer : (D) None of these
Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation
Last Answer : (B) Achieves an yield of 95-98% based on ethylene
Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these
Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins
Last Answer : (D) Urea-formaldehyde resins
Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these
Last Answer : (C) Initial hydrolysis of silicone monomer
Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics
Last Answer : (A) Decorative paint
Description : Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene
Last Answer : (A) Thiokol
Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a crosslinked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6
Last Answer : (A) Bakelite (phenol formaldehyde)
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)
Last Answer : (C) Polychlorophrene
Description : Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde
Last Answer : (C) Urea formaldehyde
Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer
Last Answer : (C) Same as thermoset phenol formaldehyde
Description : __________ is never shipped in glass carboys. (A) Ammonia (B) Acetic acid (C) Phenol (D) Formaldehyde
Last Answer : (A) Ammonia
Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer
Last Answer : (C) Same as thermosetting phenol-formaldehyde
Description : Phenol formaldehyde resin is used as an adhesive in making (A) Laminates (B) Card boxes (C) Furniture (D) Books
Last Answer : (A) Laminates
Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride
Last Answer : (A) Formaldehyde
Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane
Last Answer : (C) Phenol formaldehyde
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber
Description : Fourdrinier machine is used in the manufacture of (A) Sugar (B) Paper (C) Alcohol from molasses (D) Phenol formaldehyde
Last Answer : (B) Paper
Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these
Last Answer : (B) Phenol formaldehyde
Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene
Last Answer : Option A
Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene
Last Answer : (A) Terylene
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these
Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280
Last Answer : (D) 250-280
Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon
Last Answer : (B) Polythene
Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these
Last Answer : (C) Made by employing emulsion polymerisation
Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99
Last Answer : (C) 90
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (C) 250-280
Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene
Last Answer : (A) Bakelite
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (B) 10-30
Description : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is an exmaple of:
Last Answer : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is ... C. free radical reaction D. aldol reaction