Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Bakelite is obtained from :
(a) Phenol and formaldehyde
(b) Adipic acid and hexamethylene diamine
(c) Dimethyl terephthalate and ethylene glycol
(d) Neoprene
by

1 Answer

Answer :

Phenol and formaldehyde
by

Related questions

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Last Answer : (D) None of these

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Last Answer : Nylon-6,6

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene

Description : Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene

Last Answer : Adipic acid and hexamethylene diamine

Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Description : Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Last Answer : Dacron

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Last Answer : (B) Hexamethylene diamine and the adipic acid

Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Last Answer : (A) Caprolactam

The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Last Answer : Styrene

Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde(c) Acetic acid(d) Acetaldehyde

Description : Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde (c) Acetic acid (d) Acetaldehyde

Last Answer : Formic acid

Bakelite is a copolymer of Phenol and - (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Description : Bakelite is a copolymer of Phenol and - (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Last Answer : (1) Formaldehyde Explanation: Bakelite is an early plastic. It is a thermosetting phenol formaldehyde resin, formed from an elimination reaction of phenol with formaldehyde.

Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive(d) All of the above

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

Bakelite is a copolymer of Phenol and (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Description : Bakelite is a copolymer of Phenol and (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Last Answer : Formaldehyde

The chemical used in enabalining biological materials is – (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

Description : The chemical used in enabalining biological materials is – (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

Last Answer : (1) formaldehyde in water Explanation: Embalming fluids use formaldehyde as a preservative. Formaldehyde is the simplest aldehyde with the chemical formula HCHO. Formalin is a solution of formaldehyde ... based embalming fluids are much kinder to the environment than those used in previous years.

The chemical used in embalming biological materials is (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

Description : The chemical used in embalming biological materials is (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

Last Answer : formaldehyde in water

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Last Answer : (C) Polychlorophrene

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Last Answer : (C) Polychlorophrene

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is an exmaple of:

Description : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is an exmaple of:

Last Answer : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is ... C. free radical reaction D. aldol reaction

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermoset phenol formaldehyde

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Description : Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Last Answer : (B) bakelite.

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Description : Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Last Answer : Answer: Option D

Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.

Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone

Description : Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone

Last Answer : Acetic acid

Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid

Description : Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid

Last Answer : Ethylene glycol

When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Last Answer : Oxalic acid

Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Last Answer : Ethylene glycol

Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : Terephthalic acid

Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Description : Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Last Answer : (c) Hardness

PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Description : PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Last Answer : d. None of the above

For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) the number of geometrical isomers, (v) whether there is an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride

Denticity of Ethylene diamine ligand is? a) Six b) Two c) Three d) Four

Description : Denticity of Ethylene diamine ligand is? a) Six b) Two c) Three d) Four

Last Answer : a) Six

Ethylene diamine tetraacetoacetate (pron: te-tra-a-see-tow-AS-e-tate) (EDTW) is often used for which of the following: w) Determine hardness of water x) Measure the amount of zinc in a solution. y) A preservative in foods z) All of the above

Description : Ethylene diamine tetraacetoacetate (pron: te-tra-a-see-tow-AS-e-tate) (EDTW) is often used for which of the following: w) Determine hardness of water x) Measure the amount of zinc in a solution. y) A preservative in foods z) All of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE