Description : Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide
Last Answer : (B) Vinyl chloride
Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C
Last Answer : (A) 4 kgf/cm2 & 500°C
Description : The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform
Last Answer : (A) Chloroethane
Description : Which of the following, when pyrolysed, produces Perchloroethylene? (A) Ethylene dichloride (B) Chlorobenzene (C) Carbon tetrachloride (D) Chlorinated paraffin
Last Answer : (C) Carbon tetrachloride
Description : Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane
Last Answer : (B) Ethylene oxide
Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK
Last Answer : (C) Benzol and ethylene dichloride
Description : Dehydrogenation of Isopropanol produces (A) Propyl alcohol (B) Acetone (C) Trichloroethylene (D) Formaldehyde
Last Answer : (B) Acetone
Description : 1,2-Dichloroethane reacts with excess of NaNH2 to form (a) Vinyl chloride (b) Ethylene (c) Ethyl chloride (d) Acetylene
Last Answer : Acetylene
Description : Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking
Last Answer : (D) Hydrocracking
Description : H2S is scrubbed from refinery gases by absorption using (A) Dilute H2SO4 (B) Ethanol amine (C) Chilled water (D) Tri-butyl phosphate
Last Answer : (B) Ethanol amine
Description : Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of ... Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process
Last Answer : (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process
Description : Biosynthesis of Triglyceride and Lecithine both require an intermediate: (A) Monoacyl glycerol phosphate (B) Phosphatidic acid (C) Phosphatidyl ethanol amine (D) Phosphatidyl cytidylate
Last Answer : Answer : B
Description : Tetra hydroglolate can be freed from N5 methyl tetrahydrofolate only by (A) Nor epinephrine (B) Ethanol amine (C) Nicotinamide (D) Vitamin B12
Last Answer : Answer : D
Description : A typical example of an exothermic reversible reaction conducted at high pressure in industry is (A) Dehydration of ethanol (B) Methanol synthesis (C) Reformation of methane (D) Polymerisation of ethylene
Last Answer : (A) Dehydration of ethanol
Description : Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol
Last Answer : (B) Perchloroethylene
Description : Which of the following reaction conditions are used for the conversion of ethanol to ethylene
Last Answer : Which of the following reaction conditions are used for the conversion of ethanol to ethylene A. conc. `H_(2)SO_(4) ... conc. `H_(2)SO_(4)//170^(@)C`
Description : Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone
Last Answer : Acetic acid
Description : Ethanol on heating with concentrated H2SO4 at 170°C gives (a) ethylene (b) ethyl hydrogen sulfate (c) diethyl ether (d) diethyl sulfate
Last Answer : ethylene
Description : Chemically, fats are esters of long carbon-chain acids and which of the following: w) ethanol x) glycerol y) ethylene glycol z) sodium hydroxide
Last Answer : ANSWER: X -- GLYCEROL
Description : Consider the following chemicals: 1. Benzene 2. Carbon tetrachloride 3. Sodium carbonate 4. Trichloroethylene The chemicals used as dry cleaning agent(s) is/are (a) 1 only (b) 2 only (c) 1, 2 and 4 only (d) 1, 2, 3 and 4
Last Answer : Ans:(c)
Description : Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene
Last Answer : (C) Propylene
Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800
Last Answer : (A) 50000
Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active
Last Answer : (A) Thermoplastic
Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate
Last Answer : (C) Polypropylene
Description : __________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard
Last Answer : (B) Leathery
Description : A copolymer of vinyl and vinylidene chloride is called (A) Treylene (B) Orlon (C) Saran (D) Dacron
Last Answer : (C) Saran
Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide
Last Answer : (D) Polyhexamethylene adipamide
Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon
Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene
Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene
Last Answer : (A) Bakelite
Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron
Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active
Last Answer : (B) Thermoplastic
Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these
Last Answer : (B) Phenol formaldehyde
Description : Optically active amine having molecular formula `C_(5)H_(13)N` on reaction with `NaNO_(2)+HCI` produces, `3^(@)` optically inative alcohol. Find out s
Last Answer : Optically active amine having molecular formula `C_(5)H_(13)N` on reaction with `NaNO_(2)+HCI` produces, ` ... out structures of amines: A. B. C. D.
Description : Which type of amine produces N2 when treated with HONO? (a) Primary (b) Secondary (c) Tertiary (d) Quaternary
Last Answer : Primary
Description : Which one of the following molecules exhibits resonance? w) Carbon Tetrachloride x) Carbonate ion y) Sulfur Dichloride z) Phosphorus Tribromide
Last Answer : ANSWER: X -- CARBONATE ION
Description : Which of the following compounds will give an iodoform test? (a) Benzoic acid (b) Ethanol (c) Benzyl chloride (d) Methanol
Last Answer : Ethanol
Description : Which of the following compounds will be a nonelectrolyte when dissolved in water? w) sodium chloride x) potassium nitrate y) ethanol z) hydrogen chloride
Last Answer : ANSWER: Y -- ETHANOL
Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Last Answer : (B) Dacron
Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation
Last Answer : (B) Achieves an yield of 95-98% based on ethylene
Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material
Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine
Description : (A) Ethyl chloride is more reactive than vinyl chloride towards nucleophilic substitution reactions. (R) Vinyl chloride is `+I` electron pushing group
Last Answer : (A) Ethyl chloride is more reactive than vinyl chloride towards nucleophilic substitution reactions. (R) Vinyl ... A) is incorrect but (R) is correct.
Description : Synthetic human hair wigs are made from a copolymer of vinyl chloride and acrylonitrile, and is called:
Last Answer : Synthetic human hair wigs are made from a copolymer of vinyl chloride and acrylonitrile, and is ... PVC B. polyacrylonitrile C. cellulose D. dynel
Description : PVC is formed by polymerization of - (1) Styrene (2) Acetylene (3) Propene (4) Vinyl Chloride
Last Answer : (4) Vinyl Chloride Explanation: Polyvinyl chloride is produced by polymerization of the vinyl chloride monomer (VCM). About 80% of production involves suspension polymerization.
Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene
Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.
Description : The basic chemical building block of natural rubber obtained from trees is – (1) Isoprene (2) Vinyl Chloride (3) Acetylene (4) Neoprene
Last Answer : (1) Isoprene Explanation: Isoprene was first isolated by thermal decomposition of natural rubber. About 95% of isoprene production is used to produce cis-1,4- polyisoprene---a synthetic version of natural ... consists mainly of poly-cis-isoprene with a molecular weight of 100,000 to 1,000,000.
Description : Teflon is prepared by the polymerization of (a) Butadiene (b) Vinyl cyanide (c) Vinyl chloride (d) Tetrafluoroethylene
Last Answer : Tetrafluoroethylene
Description : Orlon is prepared by the polymerisation of (a) Vinyl cyanide (b) Allyl alcohol (c) Vinyl chloride (d) Allyl chloride
Last Answer : Vinyl cyanide
Description : Which of the following compounds will give a white precipitate with alcoholic AgNO3? (a) Vinylbenzene (b) Chlorobenzene (c) Vinyl chloride (d) Allyl chloride
Last Answer : Allyl chloride