Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Reaction of dimethyl terephthalate (DMT) and ethylene glycol
produces
(A) Nylon-6
(B) Dacron
(C) Polyester
(D) PVC
by

1 Answer

Answer :

(B) Dacron
by

Related questions

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Description : Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Last Answer : Dacron

Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Last Answer : (D) None of these

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Last Answer : Phenol and formaldehyde

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

__________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Description : __________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Last Answer : (C) Nylon

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

_________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Description : _________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Last Answer : (A) Cellulose

Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Description : Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polyme

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polyme

Last Answer : (A) Polyeste

Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Last Answer : (A) Polyester

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

__________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Last Answer : (C) Teflon/Dacron

PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Description : PET stands for a. Poly Ethylene Toludine b. Poly Ethylene Terephthalate c. Ply Ester Terlene d. None of the above

Last Answer : d. None of the above

Dacron is a: w) polyamide x) polyester y) polyether z) polyolefin

Description : Dacron is a: w) polyamide x) polyester y) polyether z) polyolefin

Last Answer : ANSWER: X -- POLYESTER

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

__________ fibres are made of polyamides. (A) Dacron (B) Nylon (C) Rayon (D) Orion

Description : __________ fibres are made of polyamides. (A) Dacron (B) Nylon (C) Rayon (D) Orion

Last Answer : (B) Nylon

Dacron (or Treylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Treylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is generally not used as eord for synthetic rubber tyre casing? (A) Dacron (B) Nylon (C) Cellulose (D) None of these

Description : Which of the following is generally not used as eord for synthetic rubber tyre casing? (A) Dacron (B) Nylon (C) Cellulose (D) None of these

Last Answer : (C) Cellulose

Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Description : Nylon-6, 10 which is used for bristles making is superior to nylon 6, 6 due to its lower water absorption capacity, is a/an (A) Polyester (B) Polyamide (C) Polyisopren

Last Answer : (B) Polyamide

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Last Answer : (C) 0.6

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Description : Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Last Answer : (B) Teflon

Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Last Answer : (A) Expanded polystyrene

Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

In bag filters, filter fabrics are never made of (A) Metallic wire woven mesh (B) Polyester fibres (C) Cotton fibres (D) Nylon fibres

Description : In bag filters, filter fabrics are never made of (A) Metallic wire woven mesh (B) Polyester fibres (C) Cotton fibres (D) Nylon fibres

Last Answer : (A) Metallic wire woven mesh

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC

Last Answer : Ans : Nylon 6, PVC and. Neop 

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Description : Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Last Answer : (B) bakelite.

Glycol is used to manufacture which of the following? (1) Nylon (2) Artificial silk (3) Terylene (4) Rubber

Description : Glycol is used to manufacture which of the following? (1) Nylon (2) Artificial silk (3) Terylene (4) Rubber

Last Answer : (3) Terylene Explanation: Monoethylene glycol (MEG), also known as ethylene glycol (EG) or simply glycol, is a diol mostly used for the production of polyester fibers and polyethylene ... is used to produce textiles, large soft-drink containers, photographic film, and overhead transparencies.