Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Poly Vinyl Chloride (P.V.C.) is a __________ material.
(A) Thermosetting
(B) Thermoplastic
(C) Fibrous
(D) Chemically active
by

1 Answer

Answer :

(B) Thermoplastic
by

Related questions

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

__________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard

Description : __________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard

Last Answer : (B) Leathery

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Last Answer : (A) 50000

The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform

Description : The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform

Last Answer : (A) Chloroethane

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Description : Thermoplastic resins usually (A) Remain hard as long as they are hot (B) Cannot be reclaimed from waste (C) Permanent setting resins (D) Less brittle than thermosetting resins

Last Answer : (D) Less brittle than thermosetting resins

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

__________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Last Answer : (B) Epoxy polymer

Differentiate between Thermoplastic and Thermosetting polymers.

Description : Differentiate between Thermoplastic and Thermosetting polymers.

Last Answer : Differentiate between Thermosetting and Thermoplastic polymers: Thermosetting Thermoplastic Polymers which once mould /shaped do not soften when heated and thus cannot be reshaped  Polymers whose ... tri, tetra or poly functional. Monomer used in this polymer bi functional.

Compare between thermoplastic and thermosetting plastic.

Description : Compare between thermoplastic and thermosetting plastic.

Last Answer : Thermoplastics Thermosetting They can be repeated softened by heat and hardened on cooling Once hardened and set they do not softened with application of heat They are formed by ... to soft under heat  They can be used at comparatively higher temperature without damage. 

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

__________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Description : __________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Last Answer : (C) Bakelite

Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Last Answer : (D) Poly chloroprene

Sodium tri poly phosphate (STPP) is chemically represented as (A) Na5P3O10 (B) Na4P3O8 (C) Na3P4O6 (D) Na2PO4

Description : Sodium tri poly phosphate (STPP) is chemically represented as (A) Na5P3O10 (B) Na4P3O8 (C) Na3P4O6 (D) Na2PO4

Last Answer : (A) Na5P3O10

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Last Answer : (B) Vinyl chloride

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

Buna-S is a __________ material. (A) Fibrous (B) Plastic (C) Resinous (D) Rubbery

Description : Buna-S is a __________ material. (A) Fibrous (B) Plastic (C) Resinous (D) Rubbery

Last Answer : (D) Rubbery

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

The synthetic plastic used for making insulation cover in electrical wires is ________. a ) Bakelite b)melamine c)Polyvinyl Chloride d)Poly styrene

Description : The synthetic plastic used for making insulation cover in electrical wires is ________. a ) Bakelite b)melamine c)Polyvinyl Chloride d)Poly styrene

Last Answer : c)Polyvinyl Chloride

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Description : Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Last Answer : (B) Inorganic polymer

Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Description : Polystyrene is a light, transparent, thermoplastic material used for making (A) Toys and combs (B) Packaging bags (C) Non-sticking utensils (D) Electrical insulation

Last Answer : (A) Toys and combs

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Gypsum is chemically (A) Calcium chloride (B) Potassium sulphate (C) Sodium sulphate (D) Calcium sulphate

Description : Gypsum is chemically (A) Calcium chloride (B) Potassium sulphate (C) Sodium sulphate (D) Calcium sulphate

Last Answer : (D) Calcium sulphate

Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Description : Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Last Answer : (A) Ethyl magnesium chloride

Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxid

Description : Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxid

Last Answer : (B) Vinyl chloride

Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Description : Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Last Answer : (C) Propylene

Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

A copolymer of vinyl and vinylidene chloride is called (A) Treylene (B) Orlon (C) Saran (D) Dacron

Description : A copolymer of vinyl and vinylidene chloride is called (A) Treylene (B) Orlon (C) Saran (D) Dacron

Last Answer : (C) Saran

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide

Description : Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide

Last Answer : (B) Vinyl chloride