Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Low pressure Zeigler process of polythene manufacture
(A) Employs a pressure of 30 kgf/cm2
(B) Achieves an yield of 95-98% based on ethylene
(C) Produces very low density polythene
(D) Does not use any catalyst for polymerisation
by

1 Answer

Answer :

(B) Achieves an yield of 95-98% based on ethylene
by

Related questions

Zeigler process (A) Produces high density polythene(B) Uses no catalyst(C) Produces low density polythene(D) Employs very high pressure

Description : Zeigler process (A) Produces high density polythene (B) Uses no catalyst (C) Produces low density polythene (D) Employs very high pressure

Last Answer : (A) Produces high density polythene

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

Zeigler process (A) Produces high density polyethylene (B) Produces low density polyethylene (C) Uses no catalyst (D) Employs very high pressure

Description : Zeigler process (A) Produces high density polyethylene (B) Produces low density polyethylene (C) Uses no catalyst (D) Employs very high pressure

Last Answer : (A) Produces high density polyethylene

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Description : Zeigler - Natta catalyst (AlR3 - AlCl3 ) is used in the polymerisation of (A) Vinyl acetate (B) Vinyl chloride (C) Propylene (D) Styrene

Last Answer : (C) Propylene

Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of light distillates (B) Suppress coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Description : Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of ... coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Last Answer : (B) Suppress coke formation

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Catalyst used in the production of high density polythene by low pressure Ziegler process is(A) Aluminium triethyl activated with TiCl4(B) Platinum(C) Molybdenum(D) Nickel

Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel

Last Answer : (A) Aluminium triethyl activated with TiCl4

Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Last Answer : (B) Polythene

The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : (4) Ethylene Explanation: Ethylene is a rather stable molecule that polymerizes only upon contact with catalysts. The conversion is highly exothermic, that is the process releases a lot of heat. ... is the most pervasive technology, which means that metal chlorides or metal oxides are used.

The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : Ethylene

Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Description : Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Last Answer : (B) 15-45 Kgf/cm2 & 450-550°C

Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Description : Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Last Answer : (B) 7

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger

Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2

Description : Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2

Last Answer : (C) 20°C and 760 mm Hg

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Catalyst used in catalytic polymerisation which produces polymergasoline is(A) H2SO4(B) H3PO4(C) Both (A) and (B)(D) AlCl3

Description : Catalyst used in catalytic polymerisation which produces polymergasoline is (A) H2SO4 (B) H3PO4 (C) Both (A) and (B) (D) AlCl3

Last Answer : (C) Both (A) and (B)

Density of high density polythene is about __________ gm/c.c. (A) 1.18 (B) 1.05 (C) 0.95 (D) 0.99

Description : Density of high density polythene is about __________ gm/c.c. (A) 1.18 (B) 1.05 (C) 0.95 (D) 0.99

Last Answer : (C) 0.95

Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Last Answer : (A) AgO

One barometric pressure or 1 atmospheric pressure is equal to  (a) 1 kgf/cnr2  (b) 1.033 kgf/cm2  (c) 0 kgf/cm2  (d) 1.0197 kgf/cm2  (e) 100 kgf/cm2.

Description : One barometric pressure or 1 atmospheric pressure is equal to  (a) 1 kgf/cnr2  (b) 1.033 kgf/cm2  (c) 0 kgf/cm2  (d) 1.0197 kgf/cm2  (e) 100 kgf/cm2.

Last Answer : Answer : b

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

what is Zeigler-Natta catalyst?

Description : what is Zeigler-Natta catalyst?

Last Answer : Triethylaluminium (C2H5)3Al and titanium tetrachloride(TiCl4) Condensation polymerization or step growth: Since each step produces a functionalized species and is independent of each other,this is called step groth. As,monomers with ... NH2-(CH2)6-NH2] and Adipic acid[HOOC-(CH2)4-COOH in Nylon-6,6.

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Description : Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Last Answer : (A) 6.5 kgf/Cm2 & 95°C

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

A 2 kg object weighs 1.8 kgf on a spring balance. The value of 'g' at that location in m/sec2is (A) 8.82 (B) 9.81 (C) 10.88 (D) 0.95

Description : A 2 kg object weighs 1.8 kgf on a spring balance. The value of 'g' at that location in m/sec2is (A) 8.82 (B) 9.81 (C) 10.88 (D) 0.95

Last Answer : (A) 8.82

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

The principal stresses at a point are 100, 100 and -200 kgf/cm2 , the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2(D) 400 kg/cm2

Description : The principal stresses at a point are 100, 100 and -200 kgf/cm2 , the octahedral shear stress at the  point is:  (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm2

Last Answer : (A) 100 kg/cm2

I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Description : I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Last Answer : Answer : c

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

A typical example of an exothermic reversible reaction conducted at high pressure in industry is (A) Dehydration of ethanol (B) Methanol synthesis (C) Reformation of methane (D) Polymerisation of ethylene

Description : A typical example of an exothermic reversible reaction conducted at high pressure in industry is (A) Dehydration of ethanol (B) Methanol synthesis (C) Reformation of methane (D) Polymerisation of ethylene

Last Answer : (A) Dehydration of ethanol

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Description : Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Last Answer : (C) Solution

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Last Answer : (A) Addition polymerisation product

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

How much pressure is polythene from ethylene ?

Description : How much pressure is polythene from ethylene ?

Last Answer : Ethylene is the first product to be produced at atmospheric pressure of 1200 baros.

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Description : Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these

Last Answer : (A) Ortho-phosphoric acid

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength