Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Polyhexamethylene adipamide is also known as
(A) Bakelite
(B) Nylon-66
(C) Epoxy resin
(D) Silicone rubber
by

1 Answer

Answer :

(B) Nylon-66
by

Related questions

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

__________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Description : __________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Last Answer : (C) Polythene

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

__________ practically possess no elasticity. (A) Vulcanite or ebonite(B) Spandex fibre(C) Polysulphide rubber(D) Epoxy resin

Description : __________ practically possess no elasticity. (A) Vulcanite or ebonite (B) Spandex fibre (C) Polysulphide rubber (D) Epoxy resin

Last Answer : (A) Vulcanite or ebonite

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Last Answer : Nylon-66 is an example of elastomer

Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Last Answer : (B) Nylon-6

Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Description : Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Last Answer : (A) Melamine formaldehyde resin

Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Description : Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Last Answer : (B) A good abrasive

Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Description : Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Last Answer : (C) Alkyd resin

Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Description : Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Last Answer : (A) Is a good adhesive

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Description : Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Last Answer : (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide)

Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Description : Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Is it possible to treat a stretchered canvas with polyurethane, epoxy resin or some such, to make it waterproof enough to hang over the bathroom shower?

Description : Is it possible to treat a stretchered canvas with polyurethane, epoxy resin or some such, to make it waterproof enough to hang over the bathroom shower?

Last Answer : answer:If you put on enough coats to be certain that there weren't any untreated areas, no matter how small, I don't see why not. Isn't this what they do with fiberglass coatings to make ... to boating people and ask them what they would recommend. Is this an Acrylic painting you're talking about?

What do you think about my using epoxy resin coating and flooring in all areas of my home and office, and why?

Description : What do you think about my using epoxy resin coating and flooring in all areas of my home and office, and why?

Last Answer : If the epoxy resin coating works well and safely, it should be fine. As long as the walls won't fall apart or aren't 'peeling' away. But check out the ingredients/chemical fumes of the epoxy that might affect your health. Open the windows at all times.

Are epoxy resin countertops scratch proof?

Description : Are epoxy resin countertops scratch proof?

Last Answer : Epoxy resin can be used as a sealant on counter tops to help make them resistant to scratches. There are no countertops made of epoxy resin

What are the advantages of epoxy resin as a fixative?

Description : What are the advantages of epoxy resin as a fixative?

Last Answer : Expoxy resin is very stable and that is exactly what you need in a goo fixative. The last thing you need is an unstable mix of chemicals,that can end in disaster. The advantages of epoxy ... it is durable, long-lasting, and inexpensive. Epoxy resin also resists cracking, unlike many older adhesives.

Write the properties and applications of epoxy resin.

Description : Write the properties and applications of epoxy resin.

Last Answer : Properties: i) They have good chemical resistance. ii) They have low shrinkage during curing. iii) They possess good electrical resistance. iv) These compounds can be used in solid and ... to their electrical resistance they are widely used in making insulators, bushings etc. for high voltage. 

Epoxy resin transformers are more suitable in hazardous areas. Give reason.

Description : Epoxy resin transformers are more suitable in hazardous areas. Give reason.

Last Answer : Reason for Epoxy resin transformers are more suitable in hazardous areas :   1. Core used is of CRGO M4-M3 circular size, minimizes leakage reactance and hence core losses will be less. 2. Winding ... of oil there is no need of testing the dielectric strength of oil or no filtration of oil.

__________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Description : __________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Last Answer : (C) Polythene

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Description : Nylon-6 is a (A) Polyamide (B) Thermosetting resin (C) Polyester (D) None of these

Last Answer : (A) Polyamide

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out ... is also referred to as a polysaccharide, because it is a polymer of the monosaccharide glucose.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out water molecules as they chemically combine.

Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Last Answer : Nylon-6,6

Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Description : Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Last Answer : Bakelite

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : Starch

The polymer used in making plastic crockery is (1) Decron (2) Nylon (3) Bakelite (4) Melamine

Description : The polymer used in making plastic crockery is (1) Decron (2) Nylon (3) Bakelite (4) Melamine

Last Answer : Melamine

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid