Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch
by

1 Answer

Answer :

Starch
by

Related questions

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out ... is also referred to as a polysaccharide, because it is a polymer of the monosaccharide glucose.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out water molecules as they chemically combine.

__________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Description : __________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Last Answer : (C) Polythene

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Description : Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Last Answer : Bakelite

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

The polymer used in making plastic crockery is (1) Decron (2) Nylon (3) Bakelite (4) Melamine

Description : The polymer used in making plastic crockery is (1) Decron (2) Nylon (3) Bakelite (4) Melamine

Last Answer : Melamine

Arrange the following polymer in increasing order of their molecular forces : (a) nylon-6, 6, Buna-S, polythene. (b) nylon-6, Neoprene, polyvinyl chloride.

Description : Arrange the following polymer in increasing order of their molecular forces : (a) nylon-6, 6, Buna-S, polythene. (b) nylon-6, Neoprene, polyvinyl chloride.

Last Answer : Ans. (a) Buna S < Polythene < Nylon-6, 6. (b) Neoprene < Polyvinyl Chloride < Nylon-6.

38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene

Last Answer : Nylon-66 is an example of elastomer

Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Description : Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Last Answer : (C) Neoprene is a natural rubber

Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Last Answer : Nylon-6,6

Which of the following is used to make light weight, but strong plastic? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Description : Which of the following is used to make light weight, but strong plastic? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Last Answer : (3) Polyvinyl Chloride Explanation: Polyvinyl chloride (PVC) is a common, strong but lightweight plastic that is used in making tough plastic. It is used for flexible applications such ... cables. It is the third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene.

Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.

Description : Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.

Last Answer : Ans: Nylon 66 condensation polymer.  Buna-S and polythene—Addition polymer.

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Which of the following is used to make light weight, but strong plastic ? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Description : Which of the following is used to make light weight, but strong plastic ? (1) Nylon (2) Polythene (3) Polyvinyl Chloride (4) Methyl Methacrylate

Last Answer : Polyvinyl Chloride

__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Last Answer : (C) Bakelite

__________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Description : __________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Last Answer : (C) Polythene

Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Description : Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Last Answer : (B) Bakelite

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

__________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Description : __________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Last Answer : (C) Bakelite

The first fully synthetic plastic was_________. a) Bakelite b)melamine c)Teflon d)polythene

Description : The first fully synthetic plastic was_________. a) Bakelite b)melamine c)Teflon d)polythene

Last Answer : a) Bakelite

What is a Bakelite? (1) Solution (2) Acid (3) Base (4) Polymer

Description : What is a Bakelite? (1) Solution (2) Acid (3) Base (4) Polymer

Last Answer : (4) Polymer Explanation: Bakelite is the commercial name for the polymer obtained by the polymerization of phenol and formaldehyde. It is an early plastic. Plastic (from the Greek "plastikos," ... , polymers. Bakelite was developed by the BelgianAmerican chemist Leo Baekeland in New York in 1907.

Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive(d) All of the above

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

What is a Bakelite ? (1) Solution (2) Acid (3) Base (4) Polymer

Description : What is a Bakelite ? (1) Solution (2) Acid (3) Base (4) Polymer

Last Answer : Polymer

Polythene is polymer of – (1) Ethylene (2) Propylene (3) Acetylene (4) Aniline

Description : Polythene is polymer of – (1) Ethylene (2) Propylene (3) Acetylene (4) Aniline

Last Answer : (1) Ethylene Explanation: The ingredient or monomer is ethylene (IUPAC name ethene). It has the formula C2H4, consisting of a pair of CH2 groups connected by a double bond. Because the catalysts are highly reactive, the ethylene must be of high purity. Typical specifications are H2SO4

Polythene is polymer of (1) Ethylene (2) Propylene (3) Acetylene (4) Aniline

Description : Polythene is polymer of (1) Ethylene (2) Propylene (3) Acetylene (4) Aniline

Last Answer : Ethylene

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following is a biodegradable waste? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Description : Which of the following is a biodegradable waste? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Last Answer : (1) Wool

Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Last Answer : (B) Polythene

Which of the following is polymeric solid? a) Nylon b) Plastic c) Polythene d) All of above

Description : Which of the following is polymeric solid? a) Nylon b) Plastic c) Polythene d) All of above

Last Answer : d) All of above

Which of the following is a biodegradable waste ? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Description : Which of the following is a biodegradable waste ? (1) Wool (2) Polythene bags (3) Plastics (4) Nylon

Last Answer : Wool

Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : (2) Polyamide polymer Explanation: Nylon is a generic designation for a family of synthetic polymers, more specifically aliphatic or semiaromatic polyamides. They can be melt-processed into fibers, ... . Nylon polymers have found significant commercial applications in fibers, in shapes and in films.

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Description : Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Last Answer : Nylon-6,6

Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : Polyamide polymer

Bakelite is the condensation polymer of:

Description : Bakelite is the condensation polymer of:

Last Answer : Bakelite is the condensation polymer of: A. `C_(6)H_(5)OH` and caprolactum B. HCHO and phthalic acid ... H_(5)OH` and HCHO D. HCHO and ethylene glycol

Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Description : Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Last Answer : (C) Poly-methyl-methacrylate (PMMA)

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

Which of the following is not a polymer of two monomers? (A) Teflon (B) Bakelite (C) SBR (D) None of these

Description : Which of the following is not a polymer of two monomers? (A) Teflon (B) Bakelite (C) SBR (D) None of these

Last Answer : (A) Teflon

Which of the following is an inorganic polymer? (A) Teflon (B) Perspex (C) Silicones (D) Bakelite

Description : Which of the following is an inorganic polymer? (A) Teflon (B) Perspex (C) Silicones (D) Bakelite

Last Answer : (C) Silicones