__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

__________ is not a condensation polymer.
(A) Teflon
(B) Nylon-66
(C) Dacron
(D) Polystyrene
by

1 Answer

Answer :

(A) Teflon
by

Related questions

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

__________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Last Answer : (C) Teflon/Dacron

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Description : Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Last Answer : Nylon-6,6

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Description : Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Last Answer : Dacron

Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Description : Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Last Answer : (B) Nylon-66

The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : (2) Polystyrene Explanation: Polystyrene is an synthetic aromatic polymer made from the monomer styrene, a liquid petrochemical. It is one of the most widely used plastics. Uses include protective ... containers (such as "clamshells"), lids, bottles, trays, tumblers, and disposable cutlery.

The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : Polystyrene

Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Last Answer : (B) Polythene

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Last Answer : (B) Nylon-6

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Description : Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Last Answer : Only III

Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Description : Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Last Answer : Bakelite

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Last Answer : (A) Average degree of polymerisation of the polymer is 1966

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

__________ fibres are made of polyamides. (A) Dacron (B) Nylon (C) Rayon (D) Orion

Description : __________ fibres are made of polyamides. (A) Dacron (B) Nylon (C) Rayon (D) Orion

Last Answer : (B) Nylon

__________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Description : __________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Last Answer : (C) Nylon

Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Description : Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Last Answer : (B) Teflon

Poly-methyl-methacrylate, which is an acrylic resin, is also called (A) Thiokol (B) Plexiglass or Lucite (C) Dacron (D) Teflon

Description : Poly-methyl-methacrylate, which is an acrylic resin, is also called (A) Thiokol (B) Plexiglass or Lucite (C) Dacron (D) Teflon

Last Answer : (B) Plexiglass or Lucite

Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Description : Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Last Answer : (A) Melamine resins

Poly Tetrafluoroethylene (P.T.F.E.) is known as (A) Bakelite (B) Teflon (C) Celluloid (D) Dacron

Description : Poly Tetrafluoroethylene (P.T.F.E.) is known as (A) Bakelite (B) Teflon (C) Celluloid (D) Dacron

Last Answer : (B) Teflon

Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Description : Glyptal used in the manufacture of paints & lacquers is a __________ polymer. (A) Polyamide (B) Polystyrene (C) Polyester (D) Polyacrylonitril

Last Answer : (C) Polyester

__________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Last Answer : (B) Epoxy polymer

_________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Description : _________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Last Answer : (A) Cellulose

Dacron (or Treylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Treylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Which of the following is generally not used as eord for synthetic rubber tyre casing? (A) Dacron (B) Nylon (C) Cellulose (D) None of these

Description : Which of the following is generally not used as eord for synthetic rubber tyre casing? (A) Dacron (B) Nylon (C) Cellulose (D) None of these

Last Answer : (C) Cellulose

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ion exchange resins are made of (A) Lucite (B) Sulphonated Bakelite (C) Polystyrene (D) Teflon

Description : Ion exchange resins are made of (A) Lucite (B) Sulphonated Bakelite (C) Polystyrene (D) Teflon

Last Answer : (B) Sulphonated Bakelite

Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Last Answer : (D) None of these

Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Description : Dacron is a/an (A) Polyester (B) Unsaturated polyester (C) Polyamide (D) Inorganic polymer

Last Answer : (A) Polyester

Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Last Answer : (C) PVC

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Last Answer : (C) 90

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (C) 250-280