__________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

__________ scrap can be recycled & reutilised.
(A) Bakelite
(B) Epoxy resin
(C) Polythene
(D) None of these
by

1 Answer

Answer :

(C) Polythene
by

Related questions

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

__________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Last Answer : (B) Epoxy polymer

Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

__________ practically possess no elasticity. (A) Vulcanite or ebonite(B) Spandex fibre(C) Polysulphide rubber(D) Epoxy resin

Description : __________ practically possess no elasticity. (A) Vulcanite or ebonite (B) Spandex fibre (C) Polysulphide rubber (D) Epoxy resin

Last Answer : (A) Vulcanite or ebonite

__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Last Answer : (C) Bakelite

__________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Description : __________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Last Answer : (C) Polythene

__________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Description : __________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Last Answer : (C) Bakelite

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Description : Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Last Answer : (A) Melamine formaldehyde resin

Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Description : Epoxy resin is (A) Not used for surface coating (B) A good abrasive (C) An elastomer (D) A polyester

Last Answer : (B) A good abrasive

Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Description : Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Last Answer : (C) Alkyd resin

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Description : Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Last Answer : (A) Is a good adhesive

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Description : Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Last Answer : (B) Bakelite

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Description : Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Last Answer : (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide)

Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Description : Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Is it possible to treat a stretchered canvas with polyurethane, epoxy resin or some such, to make it waterproof enough to hang over the bathroom shower?

Description : Is it possible to treat a stretchered canvas with polyurethane, epoxy resin or some such, to make it waterproof enough to hang over the bathroom shower?

Last Answer : answer:If you put on enough coats to be certain that there weren't any untreated areas, no matter how small, I don't see why not. Isn't this what they do with fiberglass coatings to make ... to boating people and ask them what they would recommend. Is this an Acrylic painting you're talking about?

What do you think about my using epoxy resin coating and flooring in all areas of my home and office, and why?

Description : What do you think about my using epoxy resin coating and flooring in all areas of my home and office, and why?

Last Answer : If the epoxy resin coating works well and safely, it should be fine. As long as the walls won't fall apart or aren't 'peeling' away. But check out the ingredients/chemical fumes of the epoxy that might affect your health. Open the windows at all times.

Are epoxy resin countertops scratch proof?

Description : Are epoxy resin countertops scratch proof?

Last Answer : Epoxy resin can be used as a sealant on counter tops to help make them resistant to scratches. There are no countertops made of epoxy resin

What are the advantages of epoxy resin as a fixative?

Description : What are the advantages of epoxy resin as a fixative?

Last Answer : Expoxy resin is very stable and that is exactly what you need in a goo fixative. The last thing you need is an unstable mix of chemicals,that can end in disaster. The advantages of epoxy ... it is durable, long-lasting, and inexpensive. Epoxy resin also resists cracking, unlike many older adhesives.

Write the properties and applications of epoxy resin.

Description : Write the properties and applications of epoxy resin.

Last Answer : Properties: i) They have good chemical resistance. ii) They have low shrinkage during curing. iii) They possess good electrical resistance. iv) These compounds can be used in solid and ... to their electrical resistance they are widely used in making insulators, bushings etc. for high voltage. 

Epoxy resin transformers are more suitable in hazardous areas. Give reason.

Description : Epoxy resin transformers are more suitable in hazardous areas. Give reason.

Last Answer : Reason for Epoxy resin transformers are more suitable in hazardous areas :   1. Core used is of CRGO M4-M3 circular size, minimizes leakage reactance and hence core losses will be less. 2. Winding ... of oil there is no need of testing the dielectric strength of oil or no filtration of oil.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out ... is also referred to as a polysaccharide, because it is a polymer of the monosaccharide glucose.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out water molecules as they chemically combine.

The first fully synthetic plastic was_________. a) Bakelite b)melamine c)Teflon d)polythene

Description : The first fully synthetic plastic was_________. a) Bakelite b)melamine c)Teflon d)polythene

Last Answer : a) Bakelite

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : Starch

Glycerol released from adipose tissue by hydrolysis of triglycerides is mainly (A) Taken up by liver (B) Taken up by extrahepatic tissues (C) Reutilised in adipose tissue (D) Excreted from the body FATS AND FATTY ACID METABOLISM 85

Description : Glycerol released from adipose tissue by hydrolysis of triglycerides is mainly (A) Taken up by liver (B) Taken up by extrahepatic tissues (C) Reutilised in adipose tissue (D) Excreted from the body FATS AND FATTY ACID METABOLISM 85

Last Answer : Answer : A

__________ mixer is used for devulcanisation of rubber scrap & making water dispersion & rubber solution.(A) Tumbler (B) Banbury (C) Muller (D) Ribbon blender

Description : __________ mixer is used for devulcanisation of rubber scrap & making water dispersion & rubber solution. (A) Tumbler (B) Banbury (C) Muller (D) Ribbon blender

Last Answer : (B) Banbury

Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Description : The most suitable equipment used to devulcanise rubber scrap and to make water dispersion & rubber solution is a (A) Boundary mixer (B) Propeller agitator (C) Sharpies centrifuge

Last Answer : (A) Boundary mixer

Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Description : Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Last Answer : (C) Urea formaldehyde

__________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Last Answer : (B) Amino

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

__________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density

Description : __________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density

Last Answer : (A) High density

Softening point of high density polythene is about __________ °C. (A) 85 (B) 135 (C) 165 (D) 205

Description : Softening point of high density polythene is about __________ °C. (A) 85 (B) 135 (C) 165 (D) 205

Last Answer : (B) 135

Density of low density polythene is about __________ gm/c.c. (A) 0.38 (B) 0.56 (C) 0.81 (D) 0.91

Description : Density of low density polythene is about __________ gm/c.c. (A) 0.38 (B) 0.56 (C) 0.81 (D) 0.91

Last Answer : (D) 0.91

__________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Last Answer : (C) Teflon/Dacron

Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

Density of high density polythene is about __________ gm/c.c. (A) 1.18 (B) 1.05 (C) 0.95 (D) 0.99

Description : Density of high density polythene is about __________ gm/c.c. (A) 1.18 (B) 1.05 (C) 0.95 (D) 0.99

Last Answer : (C) 0.95

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C