Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Synthetic polymer produced by using terephthalic acid and ethylene
glycol is
(A) Terylene
(B) Nylon-66
(C) PVC
(D) Polystyrene
by

1 Answer

Answer :

(A) Terylene
by

Related questions

Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : Terephthalic acid

Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Last Answer : (C) Adipic acid

Glycol is used to manufacture which of the following? (1) Nylon (2) Artificial silk (3) Terylene (4) Rubber

Description : Glycol is used to manufacture which of the following? (1) Nylon (2) Artificial silk (3) Terylene (4) Rubber

Last Answer : (3) Terylene Explanation: Monoethylene glycol (MEG), also known as ethylene glycol (EG) or simply glycol, is a diol mostly used for the production of polyester fibers and polyethylene ... is used to produce textiles, large soft-drink containers, photographic film, and overhead transparencies.

Glycol is used to manufacture which of the following ? (1) Nylon (2) Artificial silk (3) Terylene (4) Rubber

Description : Glycol is used to manufacture which of the following ? (1) Nylon (2) Artificial silk (3) Terylene (4) Rubber

Last Answer : Terylene

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Last Answer : (B) Nylon-66

Which of the following polymers contain nitrogen (a) PVC (b) Teflon (c) Nylon (d) Terylene

Description : Which of the following polymers contain nitrogen (a) PVC (b) Teflon (c) Nylon (d) Terylene

Last Answer : Nylon

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Last Answer : (C) PVC

Which synthetic fibre is known as artificial Silk? A. Nylon B. Rayon (Answer) C. Cotton D. Terylene

Description : Which synthetic fibre is known as artificial Silk? A. Nylon B. Rayon (Answer) C. Cotton D. Terylene

Last Answer : B. Rayon (Answer)

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

______ fiber is used in making bulletproof vests. (1) Nylon-66 (2) Terylene (3) Kevlar (4) Lexan

Description : ______ fiber is used in making bulletproof vests. (1) Nylon-66 (2) Terylene (3) Kevlar (4) Lexan

Last Answer : (3) Kevlar Explanation: Kevlar, a para-aramid synthetic fiber, is used for making bullet proof vests protective inserts.

Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Description : Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Last Answer : Sulfur.

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Description : Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Last Answer : Dacron

__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Last Answer : (A) Average degree of polymerisation of the polymer is 1966

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66

Last Answer : (C) Teflon

Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Last Answer : Nylon-6,6

In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Last Answer : (A) Terylene

Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Last Answer : Methyl alcohol is produced by fermentation of sugars

Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon

Last Answer : (B) Polythene

__________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Description : __________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Last Answer : (C) Nylon

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Last Answer : (D) None of these

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Terylene is a/an (A) Addition polymer (B) Poly amide (C) Homopolymer (D) None of these

Description : Terylene is a/an (A) Addition polymer (B) Poly amide (C) Homopolymer (D) None of these

Last Answer : (D) None of these

The synthetic fibres produced from __________ are known as rayon. (A) Lignin (B) Cellulose (C) Polyamides (D) Ethylene glyco

Description : The synthetic fibres produced from __________ are known as rayon. (A) Lignin (B) Cellulose (C) Polyamides (D) Ethylene glyco

Last Answer : (B) Cellulose

__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

Last Answer : (C) Bakelite

__________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Last Answer : (C) Teflon/Dacron

Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Last Answer : (A) Polystyrene

Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Last Answer : (A) Expanded polystyrene