Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC
Last Answer : (B) Nylon-66
Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene
Last Answer : (A) Terylene
Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.
Last Answer : Ans: Nylon 6 —Condensation polymer Neoprene and PVC— Addition polymer.
Description : Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC
Last Answer : Ans : Nylon 6, PVC and. Neop
Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC
Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66. (b) Neoprene, PVC and Nylon 6.
Description : Which of the following polymers contain nitrogen (a) PVC (b) Teflon (c) Nylon (d) Terylene
Last Answer : Nylon
Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene
Last Answer : (A) Acrylic
Description : __________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene
Last Answer : (C) Bakelite
Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene
Last Answer : (C) Teflon/Dacron
Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC
Last Answer : (A) Polystyrene
Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC
Last Answer : (A) Expanded polystyrene
Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene
Last Answer : (A) Epoxy polymer
Description : Unbreakable crockeries are made from __________ polymers. (A) Polystyrene (B) Melamine (C) Polystyrene (D) Polyurethane
Last Answer : (B) Melamine
Last Answer : (D) Polyurethane
Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene
Last Answer : (A) Teflon
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite
Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (A) Polyisoprene
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit
Description : What material is most often used for the outer covering of coaxial cables? A. PVC B. Teflon C. PE D. Polystyrene
Last Answer : A. PVC
Description : Which one among the following polymers is used for making bullet-proof material? (1) Polyvinyl chloride (2) Polystyrene (3) Polyethylene (4) Polyamide
Last Answer : (3) Polyethylene Explanation: A bullet-proof material is made of polyethylene. It is a higher grade of the plastic found in Tupperware.
Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin
Last Answer : (A) PVC
Description : Which of the following polymers is used for making a non stick coatingon frying pans? (A) Bakelite (B) Teflon (C) Perspex (D) PVC
Last Answer : (B) Teflon
Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate
Last Answer : (B) PVC
Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6
Last Answer : (B) As plasticisers
Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC
Last Answer : (A) Nylon-66
Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Last Answer : (B) Dacron
Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester
Last Answer : (B) Polyacrylonitrile
Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity
Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity
Description : Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.
Last Answer : Ans: Nylon 66 condensation polymer. Buna-S and polythene—Addition polymer.
Description : Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III
Last Answer : Only III
Description : Which of the following are addition polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) both I and II
Last Answer : both I and II
Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene
Last Answer : Nylon-66 is an example of elastomer
Description : Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing
Last Answer : (D) Degree of irregularity in atomic packing
Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness
Last Answer : (D) Hardness, rigidity & brittleness
Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these
Last Answer : (A) Good mechanical strength
Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays
Last Answer : (A) Polymeric fibres are never produced by addition polymerisation
Description : Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these
Last Answer : (C) Lower density
Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)
Last Answer : (C) Higher hardness
Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these
Last Answer : (D) None of these
Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these
Description : CFC (chloro fluoro carbon) is very highly reactive in causing depletion of ozone layer in the atmosphere. Each atom of chlorine liberated from CFC is capable of decomposing __________ molecules of ozone. (A) 10 2 (B) 10 5 (C) 10 9 (D) 10 15
Last Answer : (B) 10 5
Description : Which materials possess highest melting temperature? a.ABS b.PLA c.Nylon d.INF
Last Answer : c.Nylon
Description : Diamond has each of the following properties except: w) extreme hardness x) ability to conduct electricity y) high melting point z) tendency to burn in air
Last Answer : ANSWER: X -- ABILITY TO CONDUCT ELECTRICITY
Description : Green manure is obtained from – (1) Domestic vegetable waste (2) Oil seed husk cakes (3) Fresh animal excreta (4) Decomposing green legume plants
Last Answer : (4) Decomposing green legume plants Explanation: Green undecomposed material used as manure is called green manure. It is obtained in two ways: (1) growing green manure crops usually belonging to ... , field bonds and forest. The most important green manure crops are sunnhemp, dhaincha,. etc.
Description : Green manure is obtained from – (1) Fresh animal excreta (2) Decomposing green legume plants (3) Domestic vegetable waste (4) Oil seed husk cakes
Last Answer : (2) Decomposing green legume plants Explanation: Green manure is obtained from decomposing green legume plants.
Description : Pick up the correct statement from the following: A. Indore method of composting involves decomposition under aerobic conditions B. Bangalore method of composting involves decomposing under anaerobic conditions C ... the Bangalore method of compositing is a powdery mass called humus D. all of these
Last Answer : ANS: D
Description : Pick up the incorrect statement from the following: A. The process of decomposing the organic matter under controlled anaerobic conditions, is called sludge digestion B. Sludge digestion is carried ... contain 75% carbon dioxide D. The gases produced in sludge digestion process, contain 75% methane
Last Answer : ANS: C
Description : Which is a method of decomposing a sequential process into sub operations: a. Pipeline b. CISC c. RISC d. Database
Last Answer : a. Pipeline