The time constant of a first order process with resistance R and
capacitance C is
(A) R + C
(B) R - C
(C) RC
(D) 1/RC

1 Answer

Answer :

(C) RC

Related questions

Description : Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Last Answer : Small

Description : Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Last Answer : c) 8

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

Description : Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Last Answer : Ans: B

Description : An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Last Answer : Answer: A

Description : Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Last Answer : (B) 1/√μ

Description : RC time constant characteristics, as shown in the illustration, are important in _____________. EL-0086 A. bridge rectifiers for alternator excitation B. timing and pulse shaping circuits C. transistor power amplifier biasing D. motor controller overload protection

Last Answer : Answer: B

Description : What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Last Answer : 144 seconds (t=R x C)

Description : Time constant for RC circuit formula τ = RC Where, τ = time constant

Last Answer : Time constant for RC circuit formula τ = RC Where, τ = time constant

Description : The time constant of an RC circuit is defined as the time taken by the voltage across the capacitor to become_____ of its final value   (a) 63.2% (b) 36.8% (c) 50% (d) 100%  

Last Answer : The time constant of an RC circuit is defined as the time taken by the voltage across the capacitor to become 63.2% of its final value 

Description : In the figure, PSDA is a parallelogram. Points Q and R are taken on PS such that PQ = QR= RS and PA || QB || RC. -Maths 9th

Last Answer : Given In a parallelogram PSDA, points 0 and R are on PS such that PQ = QR = RS and PA || QB || RC. To prove ar (PQE) = ar (CFD) Proof In parallelogram PABQ, and PA||QB [given] So, ... = ΔDCF [by ASA congruence rule] ∴ ar (ΔPQE) = ar (ΔCFD) [since,congruent figures have equal area] Hence proved.

Description : In the figure, PSDA is a parallelogram. Points Q and R are taken on PS such that PQ = QR= RS and PA || QB || RC. -Maths 9th

Last Answer : Given In a parallelogram PSDA, points 0 and R are on PS such that PQ = QR = RS and PA || QB || RC. To prove ar (PQE) = ar (CFD) Proof In parallelogram PABQ, and PA||QB [given] So, ... = ΔDCF [by ASA congruence rule] ∴ ar (ΔPQE) = ar (ΔCFD) [since,congruent figures have equal area] Hence proved.

Description : In a resistance loaded, RC coupled amplifier the dc component is blocked by A) Load resistance RL B) Coupling capacitor, CC C) RB D) The transistor.

Last Answer : B) Coupling capacitor, CC

Description : RC triggering is preferred over resistance triggering because (A) it provides triggering at a precise instant (B) it gives a longer duration gate pulse (C) it enables triggering at a larger value of firing angle (D) it protects the SCR against high dv/dt

Last Answer : a

Description : The time constant of the capacitance circuit is defined as the time during which voltage?

Last Answer : The time constant of the capacitance circuit is defined as the time during which voltage rises to 63.2% of its final steady value.

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

Description : What is the effect of resistance , inductance and capacitance in transmission line ?

Last Answer : These 3 factors create voltage drop and power loss of the line. The inductive reactance creates a voltage drop across the line and the capacitance creates a charging current.

Description : All of the following are true about neurogenic shock except: A. There is a decrease in systemic vascular resistance and an increase in venous capacitance. B. Tachycardia or bradycardia may be ... Severe head injury, spinal cord injury, and high spinal anesthesia may all cause neurogenic shock.

Last Answer : Answer: C DISCUSSION: Neurogenic shock occurs when severe head injury, spinal cord injury, or pharmacologic sympathetic blockade leads to sympathetic denervation and loss of vasomotor tone. ... of treatment. The use of alpha-adrenergic agonist is infrequently necessary to treat neurogenic shock

Description : 'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : (1) Capacitance Explanation: The Farad is the SI derived unit of capacitance. It is named after the English physicist Michael Faraday.

Description : The fuse in our domestic electric circuit melts when there is a high rise in – (1) Inductance (2) Current (3) Resistance (4) Capacitance

Last Answer : (2) Current Explanation: In electronics and electrical engineering, a fuse is a type of low resistance resistor that acts as a sacrificial device to provide over protection, of either the load ... fuse interrupts excessive current (blows) so that further damage by overheating or fire is prevented.

Description : Capacitance is the property of an electric circuit opposing a change in the _____________. A. current in the circuit B. voltage in the circuit C. inductance in the circuit D. resistance in the circuit

Last Answer : Answer: B

Description : AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Description : On tank vessels with an electrically-driven capstan, the motor should be meggered periodically to test _____________. A. insulation resistance B. eddy currents C. capacitance D. armature reactance

Last Answer : Answer: A

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Description : The Wheatstone bridge is a precision measuring instrument utilizing the principle of changes in _____________. A. inductance B. capacitance C. resistance D. amperage

Last Answer : Answer: C

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Description : The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Last Answer : c) Reluctance

Description : The magnetostatics highly relies on which property? a) Resistance b) Capacitance c) Inductance d) Moment

Last Answer : c) Inductance

Description : Hays bridge is used to measure___________ and Schering bridge is used to measure____________ a) Inductance, Inductance b) Inductance, Capacitance c) Capacitance, Inductance d) Resistance, Capacitance

Last Answer : Ans: Inductance, Capacitance

Description : Which of the following parameter can be neglected for a short line ? (a) Inductance (b) Capacitance (c) Resistance (d) Reactance

Last Answer : (b) Capacitance

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

Description : An AC bridge that measures inductance in terms of resistance and capacitance.

Last Answer : Owen's Bridge

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

Description : Select the vasodilator that is administered only by slow intravenous infusion and dilates both resistance as well as capacitance vessels: A. Minoxidil B. Diazoxide C. Sodium nitroprusside D. Glyceryl trinitrate

Last Answer : C. Sodium nitroprusside

Description : In AC Circuit Theory, the term that replaces the resistance is: w) inductance x) capacitance y) impedance z) reactance

Last Answer : ANSWER: Y -- IMPEDANCE

Description : ‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : Capacitance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Last Answer : Resistance: This could be defined as the opposition  or retarding force to the flow of current in a circuit. It is measured in Ohms. Capacitance: The ability of a system of electrical conductors and insulators ... due to a rate of change of current in the circuit or coil. It's unit is Henry.

Description : RC-2, MC-2 and SC-2 correspond to (A) Same viscosity (B) Viscosity in increasing order from RC-2 to SC-2 (C) Viscosity in decreasing order from RC-2 to SC-2 (D) None of the above

Last Answer : Answer: Option A

Description : Top loading is used in an antenna in order to increase its ______. A. practical height B. beamwidth C. effective height D. input capacitance

Last Answer : C. effective height

Description : Top loading is used in an antenna in order to increase its ___________. A. input capacitance B. beamwidth C. bandwidth D. effective height

Last Answer : D. effective height

Description : For 11 kV line the capacitance per km per phase will be of the order of:  (A) 1 Farad (B) 0.1 Farad (C) 0.01 Farad (D) 0.01 microF

Last Answer : For 11 kV line the capacitance per km per phase will be of the order of: 0.01 Farad