A one-hop, full duplex, microwave system in a space diversity arrangement. Determine “how many receivers in all are used?” A. 8 B. 2 C. 4 D. 6

A one-hop, full duplex, microwave system in a space diversity arrangement. Determine
“how many receivers in all are used?”
A. 8
B. 2
C. 4
D. 6
by

1 Answer

Answer :

B. 2
by

Related questions

What is the free space loss, in dB, between two microwave parabolic antennas 38.0 kilometer apart operating at 7.0 GHz? A. 145.6 dB B. 138.5 dB C. 135.5 dB D. 140.89 dB

Description : What is the free space loss, in dB, between two microwave parabolic antennas 38.0 kilometer apart operating at 7.0 GHz? A. 145.6 dB B. 138.5 dB C. 135.5 dB D. 140.89 dB

Last Answer : D. 140.89 dB

The best solution to fading is _____. A. space diversity B. frequency diversity C. polarization diversity D. wavelength diversity

Description : The best solution to fading is _____. A. space diversity B. frequency diversity C. polarization diversity D. wavelength diversity

Last Answer : A. space diversity

Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Description : Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Last Answer : C. Two or more antennas operating on the same frequency

Two or more antennas separated by 9 wavelengths are used. A. Hybrid diversity B. Space diversity C. Polarized diversity D. Frequency diversity

Description : Two or more antennas separated by 9 wavelengths are used. A. Hybrid diversity B. Space diversity C. Polarized diversity D. Frequency diversity

Last Answer : B. Space diversity

Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Description : Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Last Answer : D. two or more antennas operating on the same frequencies

What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Description : What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Last Answer : B. Frequency

Which of the following refers to full duplex transmission? A. One at a time transmission B. Two transmission medium C. Intermittent transmission D. Two way simultaneous transmission

Description : Which of the following refers to full duplex transmission? A. One at a time transmission B. Two transmission medium C. Intermittent transmission D. Two way simultaneous transmission

Last Answer : D. Two way simultaneous transmission

Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Description : Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Last Answer : B. Duplex

Full duplex transmission means A. One way transmission B. 24-hour transmission C. Broadcast transmission D. Two-way simultaneous transmission

Description : Full duplex transmission means A. One way transmission B. 24-hour transmission C. Broadcast transmission D. Two-way simultaneous transmission

Last Answer : D. Two-way simultaneous transmission

Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Description : Transmission sent in both directions simultaneously. A. Full duplex B. Duplex C. Half duplex D. Simplex

Last Answer : B. Duplex

A microwave communications system space loss calculation formula is A. 92.4 + 10 log f +20 log d B. 94.2 + 10 log f +20 log d C. 92.4 + 20 log f +20 log d D. 94.2 + 20 log f +20 log d

Description : A microwave communications system space loss calculation formula is A. 92.4 + 10 log f +20 log d B. 94.2 + 10 log f +20 log d C. 92.4 + 20 log f +20 log d D. 94.2 + 20 log f +20 log d

Last Answer : C. 92.4 + 20 log f +20 log d

One of the following is not a useful quantity for comparing the noise performance receivers. A. Input noise voltage B. Equivalent noise resistance C. Noise temperature D. Noise figure.

Description : One of the following is not a useful quantity for comparing the noise performance receivers. A. Input noise voltage B. Equivalent noise resistance C. Noise temperature D. Noise figure.

Last Answer : A. Input noise voltage

What is the most commonly used intermediate frequency of radar receivers? A. 40 MHz B. 60 MHz C. 70 MHz D. 30 MHz

Description : What is the most commonly used intermediate frequency of radar receivers? A. 40 MHz B. 60 MHz C. 70 MHz D. 30 MHz

Last Answer : D. 30 MHz

What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Description : What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Last Answer : D. To protect small signals in PCM from quantizing distortion

ECE Board Exam March 1996 What is the purpose of the receiver’s squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent fluctuations in the AGC bias level C. To reduce the receiver’s sensitivity to all incoming signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Description : ECE Board Exam March 1996 What is the purpose of the receiver's squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent ... signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Last Answer : D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

ECE Board Exam March 1996 A device to be connected across the headset in telephone receivers to reduce the effects of acoustic shock. A. Ground B. Two rectifiers in parallel with opposite polarities C. Protector D. Fuse

Description : ECE Board Exam March 1996 A device to be connected across the headset in telephone receivers to reduce the effects of acoustic shock. A. Ground B. Two rectifiers in parallel with opposite polarities C. Protector D. Fuse

Last Answer : B. Two rectifiers in parallel with opposite polarities

ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Description : ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Last Answer : C. 174 K

Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Last Answer : A. 0.871 μW

Which of the following is not a common microwave application? A. Radar B. Data transmission C. Space communications D. Mobile radio

Description : Which of the following is not a common microwave application? A. Radar B. Data transmission C. Space communications D. Mobile radio

Last Answer : D. Mobile radio

A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Description : A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Last Answer : C. Troposcatter

Operating method in which the transmission is made alternately in each direction of a telecommunication channel A. Semi-duplex operation B. Duplex operation C. Half-duplex operation D. Simplex operation

Description : Operating method in which the transmission is made alternately in each direction of a telecommunication channel A. Semi-duplex operation B. Duplex operation C. Half-duplex operation D. Simplex operation

Last Answer : C. Half-duplex operation

What is the approximate single-hop nighttime range of F2 layer? A. 3840 km B. 3000 km C. 4130 km D. 2350 km

Description : What is the approximate single-hop nighttime range of F2 layer? A. 3840 km B. 3000 km C. 4130 km D. 2350 km

Last Answer : C. 4130 km

The approximate single-hop nighttime range of F2 layer is ____. A. 3000 km B. 3840 km C. 4130 km D. 2350km

Description : The approximate single-hop nighttime range of F2 layer is ____. A. 3000 km B. 3840 km C. 4130 km D. 2350km

Last Answer : C. 4130 km

Distance traveled by a wave in the time of one cycle. A. Hop B. Frequency C. Wavelength D. Crest

Description : Distance traveled by a wave in the time of one cycle. A. Hop B. Frequency C. Wavelength D. Crest

Last Answer : C. Wavelength

Antibody diversity arises from (A) Gene amplification (B) Gene re-arrangement (C) Alternative splicing (D) All of these

Description : Antibody diversity arises from (A) Gene amplification (B) Gene re-arrangement (C) Alternative splicing (D) All of these

Last Answer : Answer : B

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Description : Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Last Answer : B. 6 dB

A microwave system that requires the use of repeater. A. Intervening terrain is favorable B. Distances involved are greater C. The required reliability is met D. All of these

Description : A microwave system that requires the use of repeater. A. Intervening terrain is favorable B. Distances involved are greater C. The required reliability is met D. All of these

Last Answer : B. Distances involved are greater

A microwave system that requires the use of repeater. A. Intervening terrain is favorable B. Distances involved are greater C. The required reliability is met

Description : A microwave system that requires the use of repeater. A. Intervening terrain is favorable B. Distances involved are greater C. The required reliability is met

Last Answer : B. Distances involved are greater

ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Last Answer : B. Communications satellite

Indicate the correct arrangement for electromagnetic radiation in order of their increasing wavelength. (1) Microwave, infrared, visible. X-rays (2) X-rays, visible, infrared, microwave (3) Visible, infrared, microwave, X-rays (4) X-rays, infrared, visible, microwave

Description : Indicate the correct arrangement for electromagnetic radiation in order of their increasing wavelength. (1) Microwave, infrared, visible. X-rays (2) X-rays, visible, infrared, microwave (3) Visible, infrared, microwave, X-rays (4) X-rays, infrared, visible, microwave

Last Answer : (4) X-rays, infrared, visible, microwave Explanation: The Electromagnetic spectrum in order of decreasing energy, thus increasing wavelength : Gamma Rays-wavelength: 0.01 nm ; X-rays -1 nm ; Ultra-violet Rays-0.1 ... -10 m ; and Very High Frequency (VHF) and Ultra High Frequency (UHF): 10 m-10 cm.

Indicate the correct arrangement for electromagnetic radiation in order of their increasing wavelength. (1) Microwave, infrared, visible. X-rays (2) X -rays, visible, infrared, microwave (3) Visible, infrared, microwave, X-rays (4) X - rays, infrared, visible, microwave.

Description : Indicate the correct arrangement for electromagnetic radiation in order of their increasing wavelength. (1) Microwave, infrared, visible. X-rays (2) X -rays, visible, infrared, microwave (3) Visible, infrared, microwave, X-rays (4) X - rays, infrared, visible, microwave.

Last Answer : X - rays, infrared, visible, microwave.

Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET

Description : Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET

Last Answer : C. MESFET

The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Description : The transistor with the lowest noise figure in the microwave region is a A. MOSFET B. Dual-gate MOSFET C. JFET D. MESFET

Last Answer : D. MESFET

What is the maximum power that can be obtained from a microwave tube at 10 GHz? A. 500 W B. 10 W C. 50 W D. 20 W

Description : What is the maximum power that can be obtained from a microwave tube at 10 GHz? A. 500 W B. 10 W C. 50 W D. 20 W

Last Answer : B. 10 W

A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Description : A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Last Answer : C. Directional coupler

What is the common up-converter and down-converter IF for microwave communications? A. 60 MHz B. 80 MHz C. 120 MHz D. 70 MHz

Description : What is the common up-converter and down-converter IF for microwave communications? A. 60 MHz B. 80 MHz C. 120 MHz D. 70 MHz

Last Answer : D. 70 MHz

What illumination factor is normally considered in computing parabolic antenna gain in microwave communications? A. 0.54 B. 0.65 C. 0.75 D. 0.85

Description : What illumination factor is normally considered in computing parabolic antenna gain in microwave communications? A. 0.54 B. 0.65 C. 0.75 D. 0.85

Last Answer : A. 0.54

Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM

Description : Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM

Last Answer : B. TE

This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave

Description : This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave

Last Answer : B. Ionospheric scatter

The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Description : The advantage of periscope antenna in microwave A. Minimize interference to and from other neighboring stations B. Shorten waveguide link C. Reduce tower height D. All of these

Last Answer : B. Shorten waveguide link

A microwave link between the earth station and the down-town terminal. A. STL B. Uplink C. Downlink D. Terrestrial link

Description : A microwave link between the earth station and the down-town terminal. A. STL B. Uplink C. Downlink D. Terrestrial link

Last Answer : D. Terrestrial link

Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Description : Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Last Answer : B. Ionospheric scatter

It is a measure of the microwave power radiated from an antenna as a function of angular direction from the antenna axis. A. Antenna pattern B. Polarization C. Beamwidth D. Sidelobes

Description : It is a measure of the microwave power radiated from an antenna as a function of angular direction from the antenna axis. A. Antenna pattern B. Polarization C. Beamwidth D. Sidelobes

Last Answer : C. Beamwidth

ECE Board Exam March 1996 ___________ occurs when the microwave beam is at point of grazing over an obstacle. A. Diffraction B. Refraction C. Absorption D. Reflection

Description : ECE Board Exam March 1996 ___________ occurs when the microwave beam is at point of grazing over an obstacle. A. Diffraction B. Refraction C. Absorption D. Reflection

Last Answer : A. Diffraction

ECE Board Exam March 1996 The K-factor under normal atmospheric conditions in a microwave radio data profile calculation is equal to ___________. A. 2/3 B. 0 C. 4/3 D. Infinity

Description : ECE Board Exam March 1996 The K-factor under normal atmospheric conditions in a microwave radio data profile calculation is equal to ___________. A. 2/3 B. 0 C. 4/3 D. Infinity

Last Answer : C. 4/3

Determine the effective radiated power of 20 kW TV broadcast transmitter whose antenna has a field gain of 2. A. 40 kW B. 80,000 watts C. 40,000 watts D. 8,000 watts

Description : Determine the effective radiated power of 20 kW TV broadcast transmitter whose antenna has a field gain of 2. A. 40 kW B. 80,000 watts C. 40,000 watts D. 8,000 watts

Last Answer : B. 80,000 watts

A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Description : A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Last Answer : D. 8.36 kW

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Description : 12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Last Answer : c. 768 kbps