12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word.
Determine the rate of the data stream.
a. 354 kbps
b. 750 kbps
c. 768 kbps
d. 640 kbps
by

1 Answer

Answer :

c. 768 kbps
by

Related questions

In SPADE system, how many PCM-encoded voice band channels are there? A. 800 B. 600 C. 300 D. 240

Description : In SPADE system, how many PCM-encoded voice band channels are there? A. 800 B. 600 C. 300 D. 240

Last Answer : A. 800

ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Description : A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Last Answer : (C) 400 kbps

Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Description : Steps to follow to produce PCM signal. A. Quantizing, sampling, and coding B. Sampling, quantizing, and coding C. Sampling, coding and quantizing D. Coding, quantizing and coding

Last Answer : B. Sampling, quantizing, and coding

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

The most common method used for sampling voice signals in PCM systems.

Description : The most common method used for sampling voice signals in PCM systems.

Last Answer : flat top sampling

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

Which standard is utilized in intermodulation noise rates on PCM audio channels? A. CCIT Rec. G.151 B. CCIT Rec. G.172 C. CCIT Rec. G.190 D. CCIT Rec. G.190

Description : Which standard is utilized in intermodulation noise rates on PCM audio channels? A. CCIT Rec. G.151 B. CCIT Rec. G.172 C. CCIT Rec. G.190 D. CCIT Rec. G.190

Last Answer : B. CCIT Rec. G.172

What is the quantization signal-to-noise ratio if an 8-bit PCM code is used? A. 40 dB B. 50 dB C. 60 dB D. 65 dB

Description : What is the quantization signal-to-noise ratio if an 8-bit PCM code is used? A. 40 dB B. 50 dB C. 60 dB D. 65 dB

Last Answer : B. 50 dB

The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Description : The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Last Answer : (A) 2fs

In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps

Description : In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps

Last Answer : B. 64 kbps

What is the data rate of the ISDN Basic access B channel? A. 192 kbps B. 32 kbps C. 64 kbps D. 144 kbps

Description : What is the data rate of the ISDN Basic access B channel? A. 192 kbps B. 32 kbps C. 64 kbps D. 144 kbps

Last Answer : C. 64 kbps

What carrier system multiplexes 96 voice band channels into a single 6.312 Mbps data signal? A. T1 carrier system B. T2 carrier system C. T1C carrier system D. T3 carrier system

Description : What carrier system multiplexes 96 voice band channels into a single 6.312 Mbps data signal? A. T1 carrier system B. T2 carrier system C. T1C carrier system D. T3 carrier system

Last Answer : B. T2 carrier system

ECE Board Exam March 1996 The number of voice band channels in master group per CCITT standard is __________. A. 300 B. 480 C. 600 D. 12

Description : ECE Board Exam March 1996 The number of voice band channels in master group per CCITT standard is __________. A. 300 B. 480 C. 600 D. 12

Last Answer : A. 300

The speech coding rate in D-AMPS is ____. A. 8 kbps B. 13 kbps C. 15 kbps D. 20 kbps

Description : The speech coding rate in D-AMPS is ____. A. 8 kbps B. 13 kbps C. 15 kbps D. 20 kbps

Last Answer : A. 8 kbps

In GSM cellular system, the speech coding rate is ____. A. 13 kbps B. 8 kbps C. 15 kbps D. 20 kbps

Description : In GSM cellular system, the speech coding rate is ____. A. 13 kbps B. 8 kbps C. 15 kbps D. 20 kbps

Last Answer : A. 13 kbps

In PCM, it converts the PAM sampled to parallel PCM codes

Description : In PCM, it converts the PAM sampled to parallel PCM codes

Last Answer : Analog-to-Digital converter

Used for transmission of PCM encoded time – division multiplexed digital signal.

Description : Used for transmission of PCM encoded time – division multiplexed digital signal.

Last Answer : T carriers

A theory that establishes the minimum sampling rate that can be used for a given PCM systems.

Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems.

Last Answer : Nyquist sampling theorem

A theory that establishes the minimum sampling rate that can be used for a given PCM systems

Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems

Last Answer : Nyquist sampling theorem

There arethree sampling methods: __________. A) quantized, sampled, and ideal B) ideal, sampled, andflat-top C) ideal, natural, and flat-top D) none of the above

Description : There arethree sampling methods: __________. A) quantized, sampled, and ideal B) ideal, sampled, andflat-top C) ideal, natural, and flat-top D) none of the above

Last Answer : ideal, natural, and flat-top

Explain flat top sampling with circuit diagram.Draw flat top sampled signal.

Description : Explain flat top sampling with circuit diagram.Draw flat top sampled signal.

Last Answer : Flat top sampling: In flat top sampling, the top of the samples remains constant and equal to the instantaneous value of the modulating signal at the start of the sampling. Thus the ... the sampled signal and the pulse signal. Flat top sampling is mostly used in digital transmission

The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Last Answer : b) PCM signal

Basic speed rate of digital system. A. 144 kbps B. 1,544 kbps C. 64 kbps D. 2,048 kbps

Description : Basic speed rate of digital system. A. 144 kbps B. 1,544 kbps C. 64 kbps D. 2,048 kbps

Last Answer : C. 64 kbps

What is the transmission rate of a GSM cellular systemA. 64 kbps B. 240 kbps C. 128 kbps D. 270 kbps

Description : What is the transmission rate of a GSM cellular system? A. 64 kbps B. 240 kbps C. 128 kbps D. 270 kbps

Last Answer : D. 270 kbps

Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ................ (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Last Answer : Answer: Marks given to all

__________ carries digitally encoded user data. a) Traffic channels b) Control channels c) Signalling channels d) Forward channels

Description : __________ carries digitally encoded user data. a) Traffic channels b) Control channels c) Signalling channels d) Forward channels

Last Answer : a) Traffic channels

How many telegraph channels are there in the basic voice band channels? A. 24 B. 96 C. 48 D. 672

Description : How many telegraph channels are there in the basic voice band channels? A. 24 B. 96 C. 48 D. 672

Last Answer : A. 24

How many voice band channels are there in a superjumbo group? A. 600 B. 900 C. 10,800 D. 3,600

Description : How many voice band channels are there in a superjumbo group? A. 600 B. 900 C. 10,800 D. 3,600

Last Answer : C. 10,800

One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Last Answer : A. noise is amplified with voice when an FDM system is used

What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Description : What is the minimum number of bits required in a PCM code for a range of 10,000? A. 12 B. 9 C. 14 D. 10

Last Answer : C. 14

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

A boat takes 38 hrs for travelling downstream from point p to point q and coming back to a point r midway between p and q. If the velocity of the stream is 8 km/hr and the speed of the boat in still water is 28 km/hr. What is the distance between p and q? A) 720 B) 640 C) 510 D) 450

Description : A boat takes 38 hrs for travelling downstream from point p to point q and coming back to a point r midway between p and q. If the velocity of the stream is 8 km/hr and the speed of the boat in still water is 28 km/hr. What is the distance between p and q? A) 720 B) 640 C) 510 D) 450

Last Answer : ANSWER: A Explanation: Speed downstream = (28 + 8)km/hr = 36 km/hr Speed upstream = (28 – 8)km/hr = 20 km/hr Let the distance between p and q be ‘x’km Then, x/36 + (x/2)/20 = 38 x/36 +x/40 = 38 19x = 13680 X = 720 km Therefore the distance between p and q is 720km

Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Description : Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Last Answer : D. All of these

An artist makes an RGB raster image in which each pixel color is encoded with 12-bits --- 4 bits each for red, green and blue.Which of the following correctly shows the hexadecimal value for Red as a 12-bit representation A. F00 B. 00F C. FF00 D. FF0000

Description : An artist makes an RGB raster image in which each pixel color is encoded with 12-bits --- 4 bits each for red, green and blue.Which of the following correctly shows the hexadecimal value for Red as a 12-bit representation A. F00 B. 00F C. FF00 D. FF0000

Last Answer : D. FF0000

The first step in PCM is ________. A) quantization B) modulation C) sampling D) none of the above

Description : The first step in PCM is ________. A) quantization B) modulation C) sampling D) none of the above

Last Answer : sampling

The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Last Answer : PCM

Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Last Answer : b) Quantization error

What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Last Answer : 6 Kbps

What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Description : Highest theoretical frequency that can be processed at a sampling rate without aliasing. A. Folding frequency B. Resonant frequency C. Natural frequency D. Critical frequency

Last Answer : A. Folding frequency

What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Description : What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Last Answer : C. Much better noise immunity

Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101

Description : Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101

Last Answer : (A) 11100010101 

The wavelength of visible light extends from a. 0.8 to 1.0 nm b. 400 to 750 nm c. 200 to 660 nm d. 700 to 1200 nm

Description : The wavelength of visible light extends from a. 0.8 to 1.0 nm b. 400 to 750 nm c. 200 to 660 nm d. 700 to 1200 nm

Last Answer : b. 400 to 750 nm

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Description : Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Last Answer : A. PCM

What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Description : What is the number of levels required in a PCM system with S/N ratio of 40 dB? A. 64 B. 128 C. 256 D. 512

Last Answer : B. 128