What is the reference noise temperature in degrees Celsius? A. 17 B. 273 C. 25 D. 30

What is the reference noise temperature in degrees Celsius?
A. 17
B. 273
C. 25
D. 30
by

1 Answer

Answer :

A. 17
by

Related questions

At zero degrees Celsius and one atmosphere (STP), the volume of a gas is 1,000 milliliters. If the temperature is increased to 25 degrees Celsius and the pressure is doubled, what is the new volume of the gas? w) 546 milliliters x) 500 milliliters y) 1,000 milliliters z) 273 milliliters

Description : At zero degrees Celsius and one atmosphere (STP), the volume of a gas is 1,000 milliliters. If the temperature is increased to 25 degrees Celsius and the pressure is doubled, what is the new volume of the gas? w) 546 milliliters x) 500 milliliters y) 1,000 milliliters z) 273 milliliters

Last Answer : ANSWER: W -- 546 MILLILITERS

Reference noise temperature. A. 70 deg F B. 30 deg C C. 290 Kelvin D. 25 deg C

Description : Reference noise temperature. A. 70 deg F B. 30 deg C C. 290 Kelvin D. 25 deg C

Last Answer : C. 290 Kelvin

If a substance has a temperature of 273 kelvins, what is its temperature in degrees Celsius Note: C = K - 273?

Description : If a substance has a temperature of 273 kelvins, what is its temperature in degrees Celsius Note: C = K - 273?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

A gas at 0 degrees C and at normal atmospheric pressure has a volume of 273 cubic centimeters. If it is held at constant pressure until its volume is doubled, its temperature will be which one of the following? Will it be w) 2 degrees Celsius x) 200 degrees Celsius y) 273 degrees Celsius z) 546 degrees Celsius

Description : A gas at 0 degrees C and at normal atmospheric pressure has a volume of 273 cubic centimeters. If it is held at constant pressure until its volume is doubled, its temperature will be which one of the ... it be w) 2 degrees Celsius x) 200 degrees Celsius y) 273 degrees Celsius z) 546 degrees Celsius

Last Answer : ANSWER: Y -- 273 DEGREES CELSIUS

The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Last Answer : A. 273 ms

You are measuring noise at a +3 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -57dBm. This is ________dBa0. A. 20 B. 15 C. 25 D. 17

Description : You are measuring noise at a +3 dB level point, using the Lenkurt 601A, F1A weighting network, and a flat meter. The meter reading is -57dBm. This is ________dBa0. A. 20 B. 15 C. 25 D. 17

Last Answer : C. 25

Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1.0MHz and the temperature is 20˚C, and that the receiver is connected to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303

Description : Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1. ... to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303

Last Answer : A. 30.3

Liquid hydrogen boils at 17 K. What is the temperature in degrees Celsius?  a. 290  b. 63  c. -120  d. -256

Description : Liquid hydrogen boils at 17 K. What is the temperature in degrees Celsius?  a. 290  b. 63  c. -120  d. -256

Last Answer : -256

Standard design reference for environmental noise temperature. A. 300 K B. 290 K C. 32 ˚F D. 212˚F

Description : Standard design reference for environmental noise temperature. A. 300 K B. 290 K C. 32 ˚F D. 212˚F

Last Answer : B. 290 K

Reference temperature use in noise analysis A. 75 K B. 250 K C. 290 K D. 300 K

Description : Reference temperature use in noise analysis A. 75 K B. 250 K C. 290 K D. 300 K

Last Answer : C. 290 K

Absolute temperature in Kelvin. A. ˚C +273 B. ˚C+75 C. ˚C+19 D. ˚C +290

Description : Absolute temperature in Kelvin. A. ˚C +273 B. ˚C+75 C. ˚C+19 D. ˚C +290

Last Answer : A. ˚C +273

A receiver connected to an antenna whose resistance is 50 Ω has an equivalent noise resistance of 30Ω. Calculate its equivalent noise temperature if the noise figure is equal to 1.6. A. 17.4 K B. 174K C. 1.74K D. 17K

Description : A receiver connected to an antenna whose resistance is 50 Ω has an equivalent noise resistance of 30Ω. Calculate its equivalent noise temperature if the noise figure is equal to 1.6. A. 17.4 K B. 174K C. 1.74K D. 17K

Last Answer : B. 174K

Name any THREE of the four elements that are ferromagnetic at room temperature (25 degrees Celsius).

Description : Name any THREE of the four elements that are ferromagnetic at room temperature (25 degrees Celsius).

Last Answer : ANSWER: IRON (FE); COBALT (CO); NICKEL (NI); GADOLINIUM GD)

How many joules are required to cause the temperature of one gram of water to be raised from 24 degrees Celsius to 25 degrees Celsius.

Description : How many joules are required to cause the temperature of one gram of water to be raised from 24 degrees Celsius to 25 degrees Celsius.  

Last Answer : ANSWER: 4.18 JOULES

Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Description : Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Last Answer : A. Crosstalk

What is the reference level for noise measurement, F1A weighted? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Description : What is the reference level for noise measurement, F1A weighted? A. -90 dBm B. -82 dBm C. -67 dBm D. -85 dBm

Last Answer : D. -85 dBm

Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Description : Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Last Answer : D. B and C above

What is the reference noise level? A. 10 pW B. 0 dBm C. 1mW D. -90 dBm

Description : What is the reference noise level? A. 10 pW B. 0 dBm C. 1mW D. -90 dBm

Last Answer : D. -90 dBm

What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 HzB. 1000 Hz C. 1500 Hz D. 3400 Hz

Description : What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 Hz B. 1000 Hz C. 1500 Hz D. 3400 Hz

Last Answer : A. 800 Hz

What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Description : What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Last Answer : A. 800 Hz

The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the same bandwidth. A. Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Description : The ratio of the level of the modulated output of a transmitter under conditions of standard test modulation to the level of the demodulated output with no modulation applied both measured with the ... . Reference audio output B. None of these C. Audio frequency response D. Residual noise level

Last Answer : D. Residual noise level

What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz

If a thermometer indicates 30 degrees Celsius what's the temperature in degrees Fahrenheit?

Description : If a thermometer indicates 30 degrees Celsius what's the temperature in degrees Fahrenheit?

Last Answer : Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32In this case, the answer is about 86 degrees Fahrenheit.

A radio signal travels ____ yards per microseconds. A. 273 B. 328 C. 618 D. 123.6

Description : A radio signal travels ____ yards per microseconds. A. 273 B. 328 C. 618 D. 123.6

Last Answer : C. 618

What is the noise factor if the equivalent noise temperature is 25 K? A. 1.09 B. 0.09 C. 0.36 dBm D. 0.36

Description : What is the noise factor if the equivalent noise temperature is 25 K? A. 1.09 B. 0.09 C. 0.36 dBm D. 0.36

Last Answer : A. 1.09

ECE Board Exam March 1996 The equivalent noise temperature of the amplifier is 25 K. What is the noise figure? A. 1.86 B. 0.1086 C. 1.086 D. 10.86

Description : ECE Board Exam March 1996 The equivalent noise temperature of the amplifier is 25 K. What is the noise figure? A. 1.86 B. 0.1086 C. 1.086 D. 10.86

Last Answer : C. 1.086

ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Description : ECE Board Exam March 1996 A receiver connected to an antenna whose resistance is 50 ohms has an equivalent noise resistance of 30 ohms. What is the receiver’s noise temperature? A. 754 K B. 464 K C. 174 K D. 293 K

Last Answer : C. 174 K

What is ethnoic acid at the state of 25 degrees celsius?

Description : What is ethnoic acid at the state of 25 degrees celsius?

Last Answer : liqiud

What will be the pressure of a sample of 48.0 grams of oxygen gas in a glass container of volume 5.2 L at 25 degrees Celsius?

Description : What will be the pressure of a sample of 48.0 grams of oxygen gas in a glass container of volume 5.2 L at 25 degrees Celsius?

Last Answer : PV = nRTP = pressure = ?V = volume = 5.2 Ln = moles of gas = 48 g x 1 mole/32 g = 1.5 moles O2 gasR = gas constant = 0.0821 L-atm/K-moleT = temperature in K = 25 + 273 = 298 KSolving for P = nRT/V = (1.5)(0.0821)(298)/5.2P = 7.0 atm (to 2 significant figures)

Name the two elements that are liquids at 25 degrees Celsius.

Description : Name the two elements that are liquids at 25 degrees Celsius.

Last Answer : ANSWER: BROMINE (Br) AND MERCURY (Hg)

A sample of grapefruit juice at 25 degrees Celsius has a hydronium concentration of 1.78 X 10-3 molar. What is the pH of the solution? w) 2.22 x) 2.75 y) 3.25 z) 6.33

Description : A sample of grapefruit juice at 25 degrees Celsius has a hydronium concentration of 1.78 X 10-3 molar. What is the pH of the solution? w) 2.22 x) 2.75 y) 3.25 z) 6.33

Last Answer : ANSWER: X -- 2.75

What is -30 degrees celsius in farenheit?

Description : What is -30 degrees celsius in farenheit?

Last Answer : -22 fahrenheit

The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, respectively. Calculate the equivalent input-noise resistance of this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Description : You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Last Answer : C. 35

f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence partitions? A. 15, 19 and 25 degrees B. 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Description : f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence ... 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Last Answer : A. 15, 19 and 25 degrees

A thermometer measures temperature in whole degrees only. If the temperature falls below 18 degrees, the heating is switched off. It is switched on again when the temperature reaches 21 degrees. What are the best values in degrees to cover all equivalence partitions? A. 15,19 and 25. B. 17,18 and19. C. 18, 20 and22. D. 16, 26 and 32.

Description : A thermometer measures temperature in whole degrees only. If the temperature falls below 18 degrees, the heating is switched off. It is switched on again when the temperature reaches 21 degrees. What are the best values in degrees to ... and 25. B. 17,18 and19. C. 18, 20 and22. D. 16, 26 and 32.

Last Answer : A. 15,19 and 25.

Atmospheric noise becomes less severe at frequencies A. above 30 MHz B. below 30 MHz C. above 3000 kHz D. below 3000kHz

Description : Atmospheric noise becomes less severe at frequencies A. above 30 MHz B. below 30 MHz C. above 3000 kHz D. below 3000kHz

Last Answer : A. above 30 MHz

Atmospheric noise or static is not a great problem A. at frequencies below 20 MHz B. at frequencies below 5 MHz C. at frequencies above 30 MHz D. at frequencies above 1 MHz

Description : Atmospheric noise or static is not a great problem A. at frequencies below 20 MHz B. at frequencies below 5 MHz C. at frequencies above 30 MHz D. at frequencies above 1 MHz

Last Answer : C. at frequencies above 30 MHz

Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Description : Three identical circuits having 10 dB signal noise-to-noise ratio each are connected in tandem with each other, what is the overall S/N? A. 5.23 dB B. 14.77dB C. 30 dB D. 40 dB

Last Answer : A. 5.23 dB

What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Description : What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Last Answer : C. 40 dB

The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Description : The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Last Answer : D. 300 – 3000 MHz

The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Description : The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Last Answer : B. 40 dB

Atmospheric noise is less at severe frequencies above A. Audio level B. 30 MHz C. 10 GHz D. 1 GHz

Description : Atmospheric noise is less at severe frequencies above A. Audio level B. 30 MHz C. 10 GHz D. 1 GHz

Last Answer : B. 30 MHz

What signal-to-noise ratio is required for satisfactory telephone services? A. 50 dB B. 30 dB C. 40dB D. 20 dB

Description : What signal-to-noise ratio is required for satisfactory telephone services? A. 50 dB B. 30 dB C. 40dB D. 20 dB

Last Answer : A. 50 dB

What is the phase delay of an 800 Hz voice signal if the phase shift is 15 degrees? A. 1.25 µsec B. 52 µsec C. 83.33 µsec D. 26 µsec

Description : What is the phase delay of an 800 Hz voice signal if the phase shift is 15 degrees? A. 1.25 µsec B. 52 µsec C. 83.33 µsec D. 26 µsec

Last Answer : B. 52 µsec

What is the actual length in feet of a one-quarter wavelength of a coax with a velocity factor of 0.68 to 30 MHz? A. 19.26 B. 5.6 C. 17.82 D. 16.97

Description : What is the actual length in feet of a one-quarter wavelength of a coax with a velocity factor of 0.68 to 30 MHz? A. 19.26 B. 5.6 C. 17.82 D. 16.97

Last Answer : B. 5.6

The Ku-band in the satellite service A. 14/11 GHz B. 30/17 GHz C. 8/7 GHz D. 6/4 GHz

Description : The Ku-band in the satellite service A. 14/11 GHz B. 30/17 GHz C. 8/7 GHz D. 6/4 GHz

Last Answer : A. 14/11 GHz

Determine the gain of a 6 ft. parabolic dish operating at 1800 MHz. A. 30 dB B. 11.2 dB C. 15.5 dB D. 28.17 dB

Description : Determine the gain of a 6 ft. parabolic dish operating at 1800 MHz. A. 30 dB B. 11.2 dB C. 15.5 dB D. 28.17 dB

Last Answer : D. 28.17 dB

What is the temperature in Fahrenheit for -20 degrees Celsius?

Description : What is the temperature in Fahrenheit for -20 degrees Celsius?

Last Answer : 20ºC = 68.0ºFTip: Use this formula to convert degrees Celsius (C) to degrees Fahrenheit (F): (C x 1.8) + 32 = F

If temperature is 65 degrees Fahrenheit outside what is the temperature in degrees celsius?

Description : If temperature is 65 degrees Fahrenheit outside what is the temperature in degrees celsius?

Last Answer : 65 degrees Fahrenheit = 18.3 degrees Celsius.