Giving expression, define shear modulus.

Giving expression, define shear modulus.
by

1 Answer

Answer :

Shear modulus is defined as when a body is loaded within elastic limit the ratio of shear stress to shear strain is constant. 

image

by

Related questions

Along with the expression define radius of gyration and sectional modulus.

Description : Along with the expression define radius of gyration and sectional modulus.

Last Answer : Radius of gyration (K): The radius of gyration of a given area about any axis is the distance from the given axis at which the area is assumed to be concentrated without changing the MI about the given ... It is the ratio of moment of inertia to the distance of extreme fiber from neutral axis.

The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)

Description : The ratio of shear stress and shear strain of an elastic material, is  (A) Modulus of Rigidity  (B) Shear Modulus  (C) Modulus of Elasticity  (D) Both (a) and (b) 

Last Answer : (D) Both (a) and (b) 

In a shaft, the shear stress is not directly proportional to (A) Radius of the shaft (B) Angle of twist (C) Length of the shaft (D) Modulus of rigidity

Description : In a shaft, the shear stress is not directly proportional to  (A) Radius of the shaft  (B) Angle of twist  (C) Length of the shaft  (D) Modulus of rigidity

Last Answer : (C) Length of the shaft

Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, under a concentrated load W at its free end, is (A) (2/3) (WL/AG) (B) (1/3) (WL²/EIA) (C) (3/2) (WL/AG)(D) (3/2) (WL²/AG

Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, under a concentrated load W at its free end, is (A) (2/3) (WL/AG) (B) (1/3) (WL²/EIA) (C) (3/2) (WL/AG) (D) (3/2) (WL²/AG

Last Answer : (C) (3/2) (WL/AG

Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)

Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)

Last Answer : (A) (3/4) (L²w/GA)

If Z and I are the section modulus and moment of inertia of the section, the shear force F and bending moment M at a section are related by (A) F = My/I (B) F = M/Z (C) F = dM/dx (D) F Mdx

Description : If Z and I are the section modulus and moment of inertia of the section, the shear force F and bending moment M at a section are related by (A) F = My/I (B) F = M/Z (C) F = dM/dx (D) F Mdx

Last Answer : (C) F = dM/dx

The maximum twisting moment a shaft can resist, is the product of the permissible shear stress and (A) Moment of inertia (B) Polar moment of inertia (C) Polar modulus (D) Modulus of rigidly

Description : The maximum twisting moment a shaft can resist, is the product of the permissible shear stress and (A) Moment of inertia (B) Polar moment of inertia (C) Polar modulus (D) Modulus of rigidly

Last Answer : (C) Polar modulus

Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)? (A) E = 2G (1 + v) (B) E = G (1 + v) (C) E = G (1 + v)/2 (D) E = 2G (1 + 2v)

Description : Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)? (A) E = 2G (1 + v) (B) E = G (1 + v) (C) E = G (1 + v)/2 (D) E = 2G (1 + 2v)

Last Answer : (A) E = 2G (1 + v)

Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid

Description : Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid

Last Answer : Answer: Option C

The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Description : The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Last Answer : c) Bulk Modulus

The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Description : The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Last Answer : b)Young’s Modulus

A compression spring is made of music wire of 2 mm diameter having a shear strength and shear modulus of 800 Mpa and 80 Gpa respectively. The mean coil diameter is 20mm, free length is 40 mm, and the number of active coils is 10. If the mean coil diameter is reduced to 10 mm, the stiffness of the spring is approximately a. increased by 8 times b. decreased by 2 times c. increased by 2 times d. decreased by 8 times

Description : A compression spring is made of music wire of 2 mm diameter having a shear strength and shear modulus of 800 Mpa and 80 Gpa respectively. The mean coil diameter is 20mm, free length is 40 mm, and the number ... by 8 times b. decreased by 2 times c. increased by 2 times d. decreased by 8 times

Last Answer : a. increased by 8 times

A circular shaft subjected to torsion undergoes a twist of 10in a length of 120 cm. If the maximum shear stress induced is limited to 1000 kg/cm2and if modulus of rigidity G = 0.8 x 106then the radius of the shaft should be (a) p/8 (b) p/27 (c) 18/p (d) 27/p

Description : A circular shaft subjected to torsion undergoes a twist of 10in a length of 120 cm. If the maximum shear stress induced is limited to 1000 kg/cm2and if modulus of rigidity G = 0.8 x 106then the radius of the shaft should be (a) p/8 (b) p/27 (c) 18/p (d) 27/p

Last Answer : (d) 27/p

Shear modulus G is given by (a) G = t/g (b) G = g/t (c) G = Tg/t (d) G = T/g

Description : Shear modulus G is given by (a) G = t/g (b) G = g/t (c) G = Tg/t (d) G = T/g

Last Answer : (a) G = t/g

Bulk modulus of elasticity is a. Tensile stress / Tensile strain b. Shear stress / Shear strain c. Tensile stress / Shear strain d. Normal stress on each face of cube / Volumetric strain

Description : Bulk modulus of elasticity is a. Tensile stress / Tensile strain b. Shear stress / Shear strain c. Tensile stress / Shear strain d. Normal stress on each face of cube / Volumetric strain

Last Answer : d. Normal stress on each face of cube / Volumetric strain

Modulus of rigidity is (a)Tensile stress / Tensile strain (a)Shear stress / Shear strain (a)Tensile stress / Shear strain (a)Shear stress / Tensile strain

Description : Modulus of rigidity is (a)Tensile stress / Tensile strain (a)Shear stress / Shear strain (a)Tensile stress / Shear strain (a)Shear stress / Tensile strain

Last Answer : (a)Shear stress / Shear strain

Young’s Modulus of elasticity is (a)Tensile stress / Tensile strain (b)Shear stress / Shear strain (c)Tensile stress / Shear strain (d)Shear stress / Tensile strain

Description : Young’s Modulus of elasticity is (a)Tensile stress / Tensile strain (b)Shear stress / Shear strain (c)Tensile stress / Shear strain (d)Shear stress / Tensile strain

Last Answer : a)Tensile stress / Tensile strain

Based on inflation, and the year the expression was first used, what should "giving your 2 cents" be today?

Description : Based on inflation, and the year the expression was first used, what should "giving your 2 cents" be today?

Last Answer : Let me see… Way back in the early 70’s, I heard that a dollar was really only worth .26 cents. So today .02 cents wouldn’t be worth spit.

Is using the expression "Where in hell...?" giving someone a cursing?

Description : Is using the expression "Where in hell...?" giving someone a cursing?

Last Answer : answer:I'm not offended by it's use, it's pretty low key as far as cursing is concerned. But it is something said in anger, even low level anger, but anger none the less. To that extent, as a ... be cursing someone to hell. That's one of those things on how it is received, not how it is meant.

Define section modulus and neutral axis.

Description : Define section modulus and neutral axis.

Last Answer : Section Modulus: It is the ratio of M. I. of the section about the neutral axis and the distance of the most extreme fiber from the neutral axis. Neutral Axis: It is the axis shown in cross ... The intersection of the neutral layer with any normal cross section of a beam is called as neutral axis.

Define and explain Bulk Modulus.

Description : Define and explain Bulk Modulus.

Last Answer : Bulk Modulus : When a body is subjected to three mutually perpendicular like stresses of same intensity then the ratio of direct stress and the corresponding volumetric strain of the body is constant and is known as Bulk Modulus. It is denoted by K.

Define modulus of rigidity and bulk Modulus.

Description : Define modulus of rigidity and bulk Modulus.

Last Answer : Bulk Modulus (K): When a body is subjected to three mutually perpendicular like stresses of same intensity then the ratio of direct stress and the corresponding volumetric strain of the body is constant and is ... (G): It is ratio of shear stress to shear strain, is called as Modulus of Rigidity. 

Define modulus of a counter. Write the numbers of flip flops required for Mod-6 counter.

Description : Define modulus of a counter. Write the numbers of flip flops required for Mod-6 counter.

Last Answer : Modulus of counter is defined as number of states/clock the counter countes. The numbers of flip flops required for Mod-6 counter is 3.

Define shear strength of soil and state field situations of shear failure.

Description : Define shear strength of soil and state field situations of shear failure. 

Last Answer : Shear Strength of Soil: Shear strength is a term used in soil mechanics to describe the magnitude of the shear stress that a soil can sustain. . Field situations where shear failure occurs 1) ... wall, especially surcharge 3)Under foundation along planes of maximum shear 4) Sub grades of road.

Define shear force and bending moment.

Description : Define shear force and bending moment.

Last Answer : Shear force at a section defend as algebraic sum of taken only one side of section Shear force at let section vertical of this (+ve) vertical down (-ve) Shear force at section of right Section vertical down is (+ve) and vertical up is (-ve)

Define the terms unisexual and bisexual giving one example of each. -Science

Description : Define the terms unisexual and bisexual giving one example of each. -Science

Last Answer : Unisexual is the plant whose flowers contain either stamens or carpels but not both. Example: Papaya, Watermelon.

B. ACRONYM. Define the word DIAGRAM according to your own understandingby giving meaning to each letter.DIAGRAM?

Description : B. ACRONYM. Define the word DIAGRAM according to your own understandingby giving meaning to each letter.DIAGRAM?

Last Answer : D= DescriptionI=IncludingA=AuthenticG=GenreR= RepresentingA=AcquiredM= Measurements.

Define attribute by giving example.

Description : Define attribute by giving example.

Last Answer : Ans: Attribute represents the quality or character. For example color of eyes, type of mangoes, beauty etc.

Define discrete variable by giving examples.

Description : Define discrete variable by giving examples.

Last Answer : Ans: A variable which can assume only some specific values within a given range is called discrete variable. For e.g. Number of students in a class, Number of houses in a street, number of children in a family etc. it can’t occur in decimal.

Define escape speed. Derive an expression for the escape speed of an object from the surface of the earth.

Description : Define escape speed. Derive an expression for the escape speed of an object from the surface of the earth.

Last Answer : Define escape speed. Derive an expression for the escape speed of an object from the surface of the earth.

Define the binding energy of a satellite. Obtain an expression for binding energy of a satellite revolving around the Earth

Description : Define the binding energy of a satellite. Obtain an expression for binding energy of a satellite revolving around the Earth

Last Answer : Define the binding energy of a satellite. Obtain an expression for binding energy of a satellite revolving around the Earth at certain attitude.

Define what would happen to X in this expression: X += 15;

Description : Define what would happen to X in this expression: X += 15;

Last Answer : (assuming the value of X is 5) X +=15 is a short method of writing X = X + 15, so if the initial value of X is 5, then 5 + 15 = 20.

Define what is the difference between the expression “++a” and “a++”?

Description : Define what is the difference between the expression “++a” and “a++”?

Last Answer : In the first expression, the increment would happen first on variable a, and the resulting value will be the one to be used. This is also known as a prefix increment. In the second expression, ... in an operation, before the value of itself is incremented. This is also known as postfix increment.

Define what is an expression?

Description : Define what is an expression?

Last Answer : An expression is defined as a combination of operands and operators to obtain some computation. Operands represent variables or values and The operator tells is Define what operation to be performed.

State the Darcy’s law of permeability with expression. Hence define coefficient of permeability.

Description : State the Darcy’s law of permeability with expression. Hence define coefficient of permeability.

Last Answer : Darcy's law of permeability: It states that for laminar flow, the rate of flow or discharge per unit time is directly proportional to hydraulic gradient. Expression: q = KiA  / = Ki  V = Ki ... velocity of flow under a unit hydraulic gradient through a soil. Mathematically: K = V/i

Define ‘Moment of inertia’ and write mathematical expression of square and quarter circle with both axis.

Description : Define ‘Moment of inertia’ and write mathematical expression of square and quarter circle with both axis.

Last Answer : Moment of inertia of a body about any axis is equal to the product of the area of the body and square of the distance of its centroid from that axis.  OR  Moment of inertia of a body about any axis is defined as the sum of second moment of all elementary areas about that axis.

Along with expression, define slenderness ration.

Description : Along with expression, define slenderness ration.

Last Answer : Slenderness Ratio: Slenderness ratio is defined as the ratio of effective length of column to its minimum radius of gyration.

Define Hooke’s law with expression.

Description : Define Hooke’s law with expression.

Last Answer : Hook’s law. It states that when a material is loaded within its elastic limit, the stress produced is directly proportional to the strain.

Define quality factor for parallel resonance and write its mathematical expression.

Description : Define quality factor for parallel resonance and write its mathematical expression.

Last Answer : Quality Factor of Parallel AC Circuit at resonance: The quality factor or Q-factor of parallel circuit is defined as the ratio of the current circulating between two branches of the circuit to the current ... from the source. It is the current magnification in parallel circuit.  Formula: 

Class 12 | Maths | Complex Numbers | Simplify the following complex numbers and find their modulus.

Description : Class 12 | Maths | Complex Numbers | Simplify the following complex numbers and find their modulus.

Last Answer : Class 12 | Maths | Complex Numbers | Simplify the following complex numbers and find their modulus.

Class 12 | Maths | Complex Numbers | Simplify -2i ( 3 + i )( 2 + 4i )( 1 + i ) and obtain the modulus of that complex number.

Description : Class 12 | Maths | Complex Numbers | Simplify -2i ( 3 + i )( 2 + 4i )( 1 + i ) and obtain the modulus of that complex number.

Last Answer : Solution :

Class 12 | Maths | Complex Numbers | Express the complex numbers modulus-amplitude form - √3 + i

Description : Class 12 | Maths | Complex Numbers | Express the complex numbers modulus-amplitude form  - √3 + i

Last Answer : Solution : 

I need ways to test/get data about homemade plastics. What can I do with Flexural Strength and Flexural Modulus...

Description : I need ways to test/get data about homemade plastics. What can I do with Flexural Strength and Flexural Modulus...

Last Answer : answer:Strength is how strong a material is – basically breaking load. Modulus is how flexible or stretchy a material is. Does not matter if the test coupon breaks or not. Think of uncooked spaghetti vs rubber band.

The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Description : The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Last Answer : e. ML-1T-2

What is the SI unit of Young’s modulus of elasticity? -Do You Know?

Description : What is the SI unit of Young’s modulus of elasticity? -Do You Know?

Last Answer : answer:

What is modulus ?

Description : What is modulus ?

Last Answer : The maximum number that the counter can count is called modulus or mode number. If there are n flip flops in a counter , its mode number is 2 n .

What is Young’s modulus? Describe an experiment to find out Young’s modulus of material

Description : What is Young’s modulus? Describe an experiment to find out Young’s modulus of material

Last Answer : What is Young’s modulus? Describe an experiment to find out Young’s modulus of material in the form of a long straight wire.

Distinguish between Young’s modulus, bulk modulus and modulus of rigidity.

Description : Distinguish between Young’s modulus, bulk modulus and modulus of rigidity.

Last Answer : Distinguish between Young’s modulus, bulk modulus and modulus of rigidity.

What is Young’s modulus of a rigid body?

Description : What is Young’s modulus of a rigid body?

Last Answer : What is Young’s modulus of a rigid body?

If S is stress, Y is Young’s modulus of material of a wire, the energy stored in the wire per unit volume is (a) 2Y/S (b) S/2Y (c) 2S2Y (d) S2/2Y

Description : If S is stress, Y is Young’s modulus of material of a wire, the energy stored in the wire per unit volume is (a) 2Y/S (b) S/2Y (c) 2S2Y (d) S2/2Y

Last Answer : Ans:(d)