Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer
Last Answer : A. Radial divider
Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9
Last Answer : B. 11
Description : Most mobile satellite array uses ___________ in transforming 50 to 150 Ω impedance. A. stub B. balun C. quarter-wavelength transformer D. microstrip tapers.
Last Answer : C. quarter-wavelength transformer
Description : A mobile satellite array has usually how many elements? A. 6 B. 88 C. 12 D. 14
Last Answer : D. 14
Description : In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping
Last Answer : A. Spin stabilization
Description : Receives and collects satellite signals form a broadcast satellite. A. LNB B. Yagi-Uda array C. Satellite receiver D. Satellite disk
Last Answer : D. Satellite disk
Description : What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz
Last Answer : D. 500 MHz
Description : What is the typical satellite transponder bandwidth? A. 24 MHz B. 500 MHz C. 36 MHz D. 48 MHz
Last Answer : C. 36 MHz
Description : Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications
Last Answer : B. FM Broadcasting
Description : Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station
Last Answer : B. Space station
Description : Radio communication operation service between mobile and land stations or between mobile stations. A. Land mobile satellite service B. Maritime mobile service C. Mobile service D. Land mobile
Last Answer : C. Mobile service
Description : What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. ... -static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring
Last Answer : A. Apply shielding and filtering where necessary
Description : A test method of comparing two audio systems by switching inputs so that the same recording is heard in rapid succession over one given system and then the other. A. B test B. A test C. AB test D. C test
Last Answer : C. AB test
Description : The rotation of a three-phase induction motor can be reversed by _____________. A. interchanging any two of the three line leads to the stator B. disconnecting one of the three line leads to the ... the shunt field coil leads D. permanently disconnecting any two of the three line leads to the stator
Last Answer : Answer: A
Description : An entity, relying on the transmission, switching and local distribution facilities of local exchange and inter-exchange operators, and overseas carriers, offers enhanced services beyond those ordinarily ... B. Value-added service provided C. Inter-exchange carrier D. Local exchange carrier
Last Answer : B. Value-added service provided
Description : Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD
Last Answer : B. Polling
Description : Data switching systems. A. improve the efficiency of data transfer B. are limited to small data networks C. required additional lines D. are not used in data system
Last Answer : A. improve the efficiency of data transfer
Description : What is the advantage of monolithic switching regulators?
Last Answer : *Greater efficiency is achieved as the power transistor is made to operate as low impedance switch.Power transmitted across the transistor is in discrete pulses rather than as a steady current flow. * ... frequency can be increased so as to reduce the size and weight of the inductors and capacitors
Description : What is a switching regulator?
Last Answer : Switching regulators are those which operate the power transistor as a high frequency on/off switch, so that the power transistor does not conduct current continously.This gives improved efficiency over series regulators.
Description : The antenna efficiency of an HF grounded vertical antenna can be made comparable to that of a half-wave antenna A. By installing a good ground radial system B. By isolating the coax shield from ground C. By shortening the vertical D. By lengthening the vertical
Last Answer : A. By installing a good ground radial system
Description : How can the antenna efficiency of an HF grounded vertical antenna be made comparable to that of a half-wave antenna? A. By lengthening the vertical B. By installing a good ground radial system C. By shortening the vertical D. By isolating the coax shield from ground
Last Answer : B. By installing a good ground radial system
Description : An ungrounded antenna near the ground A. acts as a single antenna of twice the height B. is unlikely to need an earth mat C. acts as antenna array D. must be horizontally polarized
Last Answer : C. acts as antenna array
Description : Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas
Last Answer : C. vertical antennas
Description : A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna
Last Answer : B. Isotropic radiator
Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array
Last Answer : A. Broadside array
Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole
Last Answer : B. vertical quarter-wavelength rod
Description : _____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic
Last Answer : A. Antenna array
Description : All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic
Last Answer : A. collinear
Description : Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna
Last Answer : A. Rhombic antenna
Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array
Last Answer : B. critical phased array
Description : The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements
Last Answer : A. Parasitic elements
Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array
Last Answer : C. Rhombic antenna
Description : A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array
Last Answer : B. Yagi-uda
Description : It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array
Last Answer : D. Broadside array
Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil
Last Answer : D. loading coil
Description : A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground
Last Answer : C. has a zero DC resistance to ground
Description : A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception
Last Answer : D. must have a vertical receiving antenna for the best reception
Description : Python: create an empty Numpy array/matrix -Web-Development
Last Answer : answer:
Description : What are the advantages and disadvantages of sparse matrix using array?
Last Answer : Feel Free to Answer
Description : The typical three-layer switching topology will not create latency within a cloud network. A. True B. False
Last Answer : False
Description : Show how finite state machine model helps in designing a switching system and give a typical example.
Last Answer : Switching system basically belongs to the class of finite state machines (FSM) which are asynchronous in nature and follows a sequential logic for their operation. They can be modeled by ... circuits and memory elements. Clocked synchronous operation shown in Fig. overcome such problems.
Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above
Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments
Description : Which of the following is not a typical output from a GPS receiver? A. Latitude B. Speed C. Altitude D. Longitude
Last Answer : B. Speed
Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.
Last Answer : C. 0.635 to 15.24 cm
Description : The typical length of the rhombic antenna is ____. A. 2λ to 8λ B. 10λ to 20λ C. 1λ to 3λ D. 5λ to 10λ
Last Answer : A. 2λ to 8λ
Description : What is the typical loudness level of a watch ticking? A. 0 phon B. 40 phons C. 20 phons D. 60 phons
Last Answer : C. 20 phons
Description : What is the typical gain of a rhombic antenna? A. Between 15 to 60 B. Between 20 to 90 C. Between 50 to 75 D. Between 10 to 25
Last Answer : A. Between 15 to 60
Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz
Last Answer : A. 100 Hz
Description : What is typical loudness level of an acoustic guitar 1 foot away? A. 60dB B. 100dB C. 80dB D. 40dB
Last Answer : C. 80dB