What is the typical satellite transponder bandwidth? A. 24 MHz B. 500 MHz C. 36 MHz D. 48 MHz

What is the typical satellite transponder bandwidth?
A. 24 MHz
B. 500 MHz
C. 36 MHz
D. 48 MHz
by

1 Answer

Answer :

C. 36 MHz
by

Related questions

What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Description : What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Last Answer : D. 500 MHz

What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz

Description : What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz

Last Answer : C. 4 MHz

How many transponder channels are realized in the commercial C-band without frequency re-use? A. 24 B. 12 C. 36 D. 48

Description : How many transponder channels are realized in the commercial C-band without frequency re-use? A. 24 B. 12 C. 36 D. 48

Last Answer : B. 12

What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Description : What is the bandwidth available in the commercial C-band? A. 1000 MHz B. 36 MHz C. 250 MHz D. 500 MHz

Last Answer : D. 500 MHz

The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Last Answer : D. 500 MHz

In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz:

Description : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: (1) 34 and 106 (2) 52 and 88 (3) 106 and 142 (4) 34 and 142

Last Answer : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: 52 and 88

What is the typical center frequency spacing between adjacent channels (transponders) in satellites? A. 36 MHz B. 40 MHz C. 500 MHz D. 4 MHz

Description : What is the typical center frequency spacing between adjacent channels (transponders) in satellites? A. 36 MHz B. 40 MHz C. 500 MHz D. 4 MHz

Last Answer : B. 40 MHz

What is the common up-converter and down-converter IF? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Description : What is the common up-converter and down-converter IF? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Last Answer : C. 70 MHz

What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Description : What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Last Answer : B. 72 Mbps

Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Last Answer : A. Communication satellite

Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard

Description : Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard

Last Answer : A. transponder

The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Last Answer : B. Downlink

What is the first passive satellite transponder? A. Sun B. Early Bird C. Score D. Moon

Description : What is the first passive satellite transponder? A. Sun B. Early Bird C. Score D. Moon

Last Answer : B. Early Bird

Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Description : Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Last Answer : D. Transponder

What is the data rate in Mbps of a single satellite transponder considering an S/N of 30 dB? A. 35.8 B. 3.58 C. 358 D. 3580

Description : What is the data rate in Mbps of a single satellite transponder considering an S/N of 30 dB? A. 35.8 B. 3.58 C. 358 D. 3580

Last Answer : C. 358

Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder

Description : Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder

Last Answer : A. Attitude control subsystem

What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Description : What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Last Answer : C. TTC

Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Last Answer : B. Down link

The first passive satellite transponder. A. Early bird B. Score C. Moon D. Sputnik

Description : The first passive satellite transponder. A. Early bird B. Score C. Moon D. Sputnik

Last Answer : C. Moon

Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Description : Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Last Answer : C. Downlink

The first Philippine Agila I will have how many transpoders. A. 36 B. 48 C. 24 D. 12

Description : The first Philippine Agila I will have how many transpoders. A. 36 B. 48 C. 24 D. 12

Last Answer : A. 36

What is the maximum color TV bandwidth? A. 1.6 MHz B. 0.5 MHz C. 1.0 MHz D. 1.3 MHz

Description : What is the maximum color TV bandwidth? A. 1.6 MHz B. 0.5 MHz C. 1.0 MHz D. 1.3 MHz

Last Answer : D. 1.3 MHz

The first Philippine Mabuhay satellite has how many channels? A. 30 B. 24 C. 48 D. 50

Description : The first Philippine Mabuhay satellite has how many channels? A. 30 B. 24 C. 48 D. 50

Last Answer : A. 30

What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

Sixteen different levels (symbols) are used to encode binary data. The channel bandwidth is 36 MHz. The maximum channel capacity is

Description : Sixteen different levels (symbols) are used to encode binary data. The channel bandwidth is 36 MHz. The maximum channel capacity is

Last Answer : 288 Mbps

When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Description : When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Last Answer : A. 196 dB

What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Last Answer : C. 2225 MHz

A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Description : A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Last Answer : D. 5925 MHz

What is the electrical wavelength of a 500 MHz signal? A. 60 centimeters B. 6 meters C. 0.06 meter D. 60 meters

Description : What is the electrical wavelength of a 500 MHz signal? A. 60 centimeters B. 6 meters C. 0.06 meter D. 60 meters

Last Answer : A. 60 centimeters

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

What is the wavelength of a signal at 500 MHz? A. 0.062 cm B. 6 meters C. 60 cm D. 60 meters

Description : What is the wavelength of a signal at 500 MHz? A. 0.062 cm B. 6 meters C. 60 cm D. 60 meters

Last Answer : C. 60 cm

How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Description : How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Last Answer : A. 1250

The earth area covered by a satellite radio beam. A. Beamwidth B. Bandwidth C. Footprint D. Zone

Description : The earth area covered by a satellite radio beam. A. Beamwidth B. Bandwidth C. Footprint D. Zone

Last Answer : C. Footprint

A helical antenna is used for satellite tracking because of ______. A. Broad bandwidth B. Good front-to-back C. Maneuverability D. Circular polarization

Description : A helical antenna is used for satellite tracking because of ______. A. Broad bandwidth B. Good front-to-back C. Maneuverability D. Circular polarization

Last Answer : D. Circular polarization

What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Description : What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Last Answer : D. 300-3400 Hz

The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Description : The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Last Answer : D. Shunt

In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Last Answer : B. 11

What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Description : Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Last Answer : C. Modulator

Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder

Description : Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder

Last Answer : B. Discrete channel

What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Description : What is the typical frequency used for communicating to submerged submarines? A. 100 Hz B. 500 Hz C. 4 kHz D. 200 Hz

Last Answer : A. 100 Hz

What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Last Answer : A. 256 msec

The round-trip propagation delay between two earth stations through a geosynchronous satellite is A. 500 to 600 ms B. 300 to 400 ms C. 600 to 700 ms D. 400 to 500 ms

Description : The round-trip propagation delay between two earth stations through a geosynchronous satellite is A. 500 to 600 ms B. 300 to 400 ms C. 600 to 700 ms D. 400 to 500 ms

Last Answer : A. 500 to 600 ms

How many telegraph channels are there in the basic voice band channels? A. 24 B. 96 C. 48 D. 672

Description : How many telegraph channels are there in the basic voice band channels? A. 24 B. 96 C. 48 D. 672

Last Answer : A. 24

If the unity-gain point of the operational amplifier used in question 24 is 500 kilohertz, what is the bandwidth of the circuit?

Description : If the unity-gain point of the operational amplifier used in question 24 is 500 kilohertz, what is the bandwidth of the circuit?

Last Answer : 50 kilohertz (Gain = 10; Gain-Bandwidth Product = 500,000) 500,000(Hz)

When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Satish, Goel and Khan can do a particular job in 24,36 and 48 days respectively. If they start working together and are paid ₹ 5200 for their work, th

Description : Satish, Goel and Khan can do a particular job in 24,36 and 48 days respectively. If they start working together and are paid ₹ 5200 for their work, th

Last Answer : Satish, Goel and Khan can do a particular job in 24,36 and 48 days respectively. If they ... 5200 for their work, then find their individual shares.