Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD

Transmission system for a multidrop network
A. Taken passing
B. Polling
C. Switching
D. CSMA/CD
by

1 Answer

Answer :

B. Polling
by

Related questions

Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Description : Ethernet is baseband system using CSMA/CD operating at A. 20 Mbps B. 10 Mbps C. 30 Mbps D. 40 Mbps

Last Answer : B. 10 Mbps

In the _______ method, thestations in a network areorganizedin a logical ring. A) reservation B) polling C) token passing D) none of the above

Description : In the _______ method, thestations in a network areorganizedin a logical ring. A) reservation B) polling C) token passing D) none of the above

Last Answer : token passing

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Last Answer : CSMA/CD is not suitable for a high propagation delay

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

The reason a CSMA/CD network has a minimum length for packets is:

Description : The reason a CSMA/CD network has a minimum length for packets is:

Last Answer : to make sure all other nodes hear a collision in progress

An entity, relying on the transmission, switching and local distribution facilities of local exchange and inter-exchange operators, and overseas carriers, offers enhanced services beyond those ordinarily provided by such carriers. A. International carrier B. Value-added service provided C. Inter-exchange carrier D. Local exchange carrier

Description : An entity, relying on the transmission, switching and local distribution facilities of local exchange and inter-exchange operators, and overseas carriers, offers enhanced services beyond those ordinarily ... B. Value-added service provided C. Inter-exchange carrier D. Local exchange carrier

Last Answer : B. Value-added service provided

An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling

Description : An invitation from the primary to a secondary to transmit a message. A. Retransmission B. Selection C. Reuse D. Polling

Last Answer : D. Polling

When one stations is designated as master and rest of the stations are considered slaves message handling is ________. A. polling B. WAN C. LAN D. OSI

Description : When one stations is designated as master and rest of the stations are considered slaves message handling is ________. A. polling B. WAN C. LAN D. OSI

Last Answer : A. polling

Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Description : Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Last Answer : token passing: token

In the _______ method, each station has a predecessorand a successor. A) reservation B) polling C) token passing D) none of the above

Description : In the _______ method, each station has a predecessorand a successor. A) reservation B) polling C) token passing D) none of the above

Last Answer : token passing

In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Description : In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Last Answer : polling

In the ______ method, all dataexchanges mustbe made throughthe primarydevice even when theultimate destinationis a secondary device. A) reservation B) polling C) token passing D) none of the above

Description : In the ______ method, all dataexchanges mustbe made throughthe primarydevice even when theultimate destinationis a secondary device. A) reservation B) polling C) token passing D) none of the above

Last Answer : polling

In the _____ method, time isdivided into intervals. In each interval, a reservation frameprecedes the dataframes sent in that interval. A) reservation B) polling C) token passing D) none of the above

Description : In the _____ method, time isdivided into intervals. In each interval, a reservation frameprecedes the dataframes sent in that interval. A) reservation B) polling C) token passing D) none of the above

Last Answer : reservation

In the ________ method, a stationneeds to make a reservationbefore sending data. Time is divided into intervals. A) reservation B) polling C) token passing D) none of the above

Description : In the ________ method, a stationneeds to make a reservationbefore sending data. Time is divided into intervals. A) reservation B) polling C) token passing D) none of the above

Last Answer : reservation

In distributed systems, link and site failure is detected by ___________ a) polling b) handshaking c) token passing d) none of the mentioned

Description : In distributed systems, link and site failure is detected by ___________ a) polling b) handshaking c) token passing d) none of the mentioned

Last Answer : handshaking

In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Last Answer : CSMA/CA

In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

__________ augments the CSMA algorithm todetect collision. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b

Description : __________ augments the CSMA algorithm todetect collision. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b

Last Answer : CSMA/CD

The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Description : The _____sublayer is responsible for the operation of the CSMA/CD access method and framing. A) LLC B) MII C) MAC D) none of the above

Last Answer : MAC

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Last Answer : c. Jam

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b)D. both (a) and (b)

Description : In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b) D. both (a) and (b)

Last Answer : A. CSMA/CA

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

Explain the terms topology and access methods used in LANs. Discuss the CSMA/CD and CSMA/CA protocols.

Description : Explain the terms topology and access methods used in LANs. Discuss the CSMA/CD and CSMA/CA protocols.

Last Answer : (i) LAN topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under:  (a) Direct Connection or one to all ... it is free, the station transmits, and waits for an acknowledgment signal that the packet was received

Explain CSMA/CD and CSMA/CA.

Description : Explain CSMA/CD and CSMA/CA.

Last Answer : CSMA- resolving the media contention. Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Listen for Data Transmission on Cable (Carrier Sense) When Medium is free a) Transmit ... time, and transmit again. Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) Nov/Dec

What is CSMA/CD?

Description : What is CSMA/CD?

Last Answer : Carrier Sense Multiple Access with Collision Detection (CSMA/CD) When a station has a frame to transmit: 1) Listen for Data Transmission on Cable (Carrier Sense) 2) When Medium is Quiet (no ... for Collision. b) If collision is heard, stop transmitting, wait random time, and transmit again.

LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Description : LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Last Answer : b) CSMA/CA

Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Last Answer : c. IEEE 802.3

Which one of the following media is multidrop? (A) Shielded Twisted pair cable (B) Unshielded Twisted pair cable (C) Thick Coaxial cable (D) Fiber Optic cable

Description : Which one of the following media is multidrop? (A) Shielded Twisted pair cable (B) Unshielded Twisted pair cable (C) Thick Coaxial cable (D) Fiber Optic cable

Last Answer : (C) Thick Coaxial cable

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

A test method of comparing two audio systems by switching inputs so that the same recording is heard in rapid succession over one given system and then the other. A. B test B. A test C. AB test D. C test

Description : A test method of comparing two audio systems by switching inputs so that the same recording is heard in rapid succession over one given system and then the other. A. B test B. A test C. AB test D. C test

Last Answer : C. AB test

Data switching systems. A. improve the efficiency of data transfer B. are limited to small data networks C. required additional lines D. are not used in data system

Description : Data switching systems. A. improve the efficiency of data transfer B. are limited to small data networks C. required additional lines D. are not used in data system

Last Answer : A. improve the efficiency of data transfer

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Last Answer : A. Carrier power

Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Last Answer : C. Carrier power

The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Description : The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Last Answer : D. Shunt

What is the advantage of monolithic switching regulators?

Description : What is the advantage of monolithic switching regulators?

Last Answer : *Greater efficiency is achieved as the power transistor is made to operate as low impedance switch.Power transmitted across the transistor is in discrete pulses rather than as a steady current flow. * ... frequency can be increased so as to reduce the size and weight of the inductors and capacitors

What is a switching regulator?

Description : What is a switching regulator?

Last Answer : Switching regulators are those which operate the power transistor as a high frequency on/off switch, so that the power transistor does not conduct current continously.This gives improved efficiency over series regulators. 

How many removal examination (s) will be given to an examinee who obtains a passing rating in the majority of the subjects but obtains a rating in the other subject (s) below seventy percent (70%) but not lower than sixty percent (60%)? A. 1 B. 3 C. 2 D. Unlimited

Description : How many removal examination (s) will be given to an examinee who obtains a passing rating in the majority of the subjects but obtains a rating in the other subject (s) below seventy percent (70%) but not lower than sixty percent (60%)? A. 1 B. 3 C. 2 D. Unlimited

Last Answer : A. 1

The bending of radio waves passing over the top of a mountain range that disperses a weak portion of the signal behind the mountain is A. eddy-current phase effect B. knife-edge diffraction C. shadowing D. mirror refraction effect

Description : The bending of radio waves passing over the top of a mountain range that disperses a weak portion of the signal behind the mountain is A. eddy-current phase effect B. knife-edge diffraction C. shadowing D. mirror refraction effect

Last Answer : B. knife-edge diffraction

System calls are usually invoked by using: (A) A privileged instruction (B) An indirect jump (C) A software interrupt (D) Polling

Description : System calls are usually invoked by using: (A) A privileged instruction (B) An indirect jump (C) A software interrupt (D) Polling

Last Answer : (C) A software interrupt

Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for multiple access transmission media C. a form of TDMA in which circuit switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

_____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique

Description : _____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique

Last Answer : a) Packet switching techniques

Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Last Answer : (D) Circuit Switching