Data switching systems.
A. improve the efficiency of data transfer
B. are limited to small data networks
C. required additional lines
D. are not used in data system

1 Answer

Answer :

A. improve the efficiency of data transfer

Related questions

Description : A test method of comparing two audio systems by switching inputs so that the same recording is heard in rapid succession over one given system and then the other. A. B test B. A test C. AB test D. C test

Last Answer : C. AB test

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

Description : Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Last Answer : d. Consumer TV

Description : Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Last Answer : (B) switching system and power plant

Description : ______________is a branch of science that deals with programing the systems in such a way that they automatically learn and improve with experience A. Machine Learning B. Deep Learning C. Neural Networks D. None of these

Last Answer : A. Machine Learning 

Description : Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz

Last Answer : A. Below 2 GHz

Description : Transmission system for a multidrop network A. Taken passing B. Polling C. Switching D. CSMA/CD

Last Answer : B. Polling

Description : The required resources for communication between end systems are reserved for the duration of the session between end systems in ________ method. a) Packet switching b) Circuit switching c) Line switching d) Frequency switching

Last Answer : b) Circuit switching

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Description : The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Last Answer : D. Shunt

Description : An entity, relying on the transmission, switching and local distribution facilities of local exchange and inter-exchange operators, and overseas carriers, offers enhanced services beyond those ordinarily ... B. Value-added service provided C. Inter-exchange carrier D. Local exchange carrier

Last Answer : B. Value-added service provided

Description : What is the advantage of monolithic switching regulators?

Last Answer : *Greater efficiency is achieved as the power transistor is made to operate as low impedance switch.Power transmitted across the transistor is in discrete pulses rather than as a steady current flow. * ... frequency can be increased so as to reduce the size and weight of the inductors and capacitors

Description : What is a switching regulator?

Last Answer : Switching regulators are those which operate the power transistor as a high frequency on/off switch, so that the power transistor does not conduct current continously.This gives improved efficiency over series regulators. 

Description : Internet-like networks between a company and its businesspartners. Select the best fit for answer: A. Bandwidth alternatives B. Switching alternating C. Inter organizational networks D. Extranets

Last Answer : Extranets

Description : Telecommunication networks frequently interconnect an organization with its customers and suppliers. Select the best fit foranswer: A. Bandwidth alternatives B. Switching alternating C. Inter organizational networks D. Extranets

Last Answer : Inter organizational networks

Description : Internet-like networks within an enterprise. A. Intranets B. Switching alternating C. Inter organizational networks D. Extranets

Last Answer : Intranets

Description : Which of the following approaches to switching share networks resource? a. Circuit switching b. Packet switching c. Both A and B d. None of these

Last Answer : b. Packet switching

Description : ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Last Answer : D. the telephone network will pass direct current

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

Description : _____ is unauthorized access to or use of data, systems, server or networks including any attempt to probe scan or test the vulnerability of a system, server or network or to breach security or authentication ... the system, server or network: a) Hacking b) Cracking c) Viruses d) None of These

Last Answer : a) Hacking

Description : _____ is unauthorized access to or use of data, systems, server or networks including any attempt to probe scan or test the vulnerability of a system, server or network or to breach security or authentication ... the system, server or network: a) Hacking b) Cracking c) Viruses d) None of These

Last Answer : a) Hacking

Description : In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : circuit switching

Description : What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Last Answer : D. To protect small signals in PCM from quantizing distortion

Description : Which of the following statements about independent financial statement audit is correct? a. The audit of financial statements relieves management of its responsibilities for die financial statements. b. An ... with PSAs should be determined by the client who engaged the services of the auditor

Last Answer : The auditor's opinion is not an assurance as to the future viability of the entity as well as the effectiveness and efficiency withwhich management has conducted the affairs of the entity.

Description : A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter

Last Answer : A. Gateway

Description : Determine the additional absorption (sabines) contributed by 10 persons in a room A. 47 B. 4.7 C. 0.47 D. 470

Last Answer : A. 47

Description : Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme

Last Answer : A. Synchronous data transfer scheme

Description : Is there any way to monitor a wireless networks overall data transfer?

Last Answer : Unfortunately not. If the AE is the access point, then you’re pretty much limited to the snmp logs in the AirPort Utilities. Only way to get a 3rd-party app. to monitor bandwidth per machine is if you make a machine the AP. sorry…. :/

Description : Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Last Answer : Classifications of Data Network:  Data Networks are classified according to their geographical coverage: Wide area networks (WANs) Metropolitan area networks(MANs) Local area ...  V.53 Limits for the maintenance of telephone type circuits used for data transmission. 

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Last Answer : (D) Switching stations

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Last Answer : (D) Switching stations.

Description : The upper pulse rate and information carrying capacity of a cable is limited by a. Pulse shortening b. Attenuation c. Light leakage d. Modal dispersion

Last Answer : d. Modal dispersion

Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Last Answer : A. Around 500 miles

Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles

Last Answer : A. Around 500 miles

Description : The antenna efficiency of an HF grounded vertical antenna can be made comparable to that of a half-wave antenna A. By installing a good ground radial system B. By isolating the coax shield from ground C. By shortening the vertical D. By lengthening the vertical

Last Answer : A. By installing a good ground radial system

Description : What is the term for the ration of the radiation resistance of an antenna to the total resistance of the system? A. Effective radiated power B. Beamwidth C. Radiation conversion loss D. Antenna efficiency

Last Answer : D. Antenna efficiency

Description : How can the antenna efficiency of an HF grounded vertical antenna be made comparable to that of a half-wave antenna? A. By lengthening the vertical B. By installing a good ground radial system C. By shortening the vertical D. By isolating the coax shield from ground

Last Answer : B. By installing a good ground radial system

Description : Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and ... The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Last Answer : Answer: C

Description : Small amount of gasoline is added to alcohol to a) reduce the emission b) to increase the power output c) to increase the efficiency d) to improve cold weather starting

Last Answer : Answer: d Explanation: None.

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Last Answer : C. The clocking is derived from the data in synchronous

Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Last Answer : B. the clocking is derived from the data in synchronous transmission

Description : A company is considering a cloud environment to improve the operating efficiency for their dataand applications. The company is part of an industry where strict security and data privacy issues are of the highest ... a good choice? A. hybrid cloud B. public cloud C. private cloud D. governed cloud

Last Answer : private cloud

Description : The packets switching concept was first proposed A. in the late1980s for the Defense Ministry of US. B. in the early 1960s for military communication systems, mainly to handle speech C. in the late 1950s for Defense Ministry of US D. All of theabove E. None of the above

Last Answer : in the early 1960s for military communication systems, mainly to handle speech

Description : As the resources are reserved between two communicating end systems in circuit switching, ___________ is achieved. a) authentication b) guaranteed constant rate c) reliability d) store and forward

Last Answer : b) guaranteed constant rate

Description : Explain the basic architecture of digital switching systems. Explain in detail companding.

Last Answer : A simple N X N time division space switch is shown in Fig. The switch can be represented in an equivalence form as a two-stage network with N X 1 and 1 X N switching matrices for the first and ... = Parameter used to define the amount of compression  Vout = Compressed output voltage. 

Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Last Answer : (A) It cannot burn low grade coal

Description : An automated ship-to-shore distress alerting system using satellites and advanced terrestrial communications systems. A. GPS B. Iridium system C. INMARSAT D. GMDSS

Last Answer : D. GMDSS

Description : Which of the following factor does not harm laser efficiency? a. Atmospheric absorption b. Excitation energy not absorbed c. Problems in depopulating the lower laser level d. Inefficiency in populating the upper laser level

Last Answer : a. Atmospheric absorption