If a liquid wets a solid surface, what is the angle of contact?

If a liquid wets a solid surface, what is the angle of contact?
by

1 Answer

Answer :

Less than 90°
by

Related questions

A liquid will not wet the surface of solid if the angle of contact is which angle? -Do You Know?

Description : A liquid will not wet the surface of solid if the angle of contact is which angle? -Do You Know?

Last Answer : 90o . A liquid does not wet the solid surface if the angle of contact is obtuse ie, greater than 90o . In this case cohesive forces will be greater than adhesive forces and so, the liquid does not wet the surface of solid.

The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Description : The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Last Answer : Answer: Option C

In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a ”hybrid” layer by chemically reacting the intertubular dentin. 3. a hydrophilic monomer that alters collagen to promote cross linking of collagen to dentin. 4. a bifunctional molecule resin that copolymerizes to bis-GMA resins. a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Description : In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a hybrid layer by chemically reacting the intertubular dentin. 3. a hydrophilic ... a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Last Answer : b. 1,4

What is wets mean?

Description : What is wets mean?

Last Answer : Feel Free to Answer

Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Description : Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Last Answer : (C) Both (A) and (B)

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

When the temperature increases, what does the angle of contact of a liquid? -Do You Know?

Description : When the temperature increases, what does the angle of contact of a liquid? -Do You Know?

Last Answer : With the increase in temperature , the surface tension of liquid decreases. Due to it, the liquid surface on the solid surface becomes more flat, consequently the angle of contact of a liquid increases with the increase in temperature.

When the temperature increases, what does the angle of contact of a liquid?

Description : When the temperature increases, what does the angle of contact of a liquid?

Last Answer : Decreases

Steradian is the unit of--------? A. Solid angle (Answer) B. Liquid angle C. Gas angle D. Plain angle

Description : Steradian is the unit of--------? A. Solid angle (Answer) B. Liquid angle C. Gas angle D. Plain angle

Last Answer : A. Solid angle (Answer)

Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced due to density difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Description : Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced ... difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Last Answer : (D) None of these

Contact force always acts at A. acute angles to the surface producing it B. right angles to the surface producing it C. obtuse angle to the surface producing it D. parallel to the surface producing it

Description : Contact force always acts at A. acute angles to the surface producing it B. right angles to the surface producing it C. obtuse angle to the surface producing it D. parallel to the surface producing it

Last Answer : right angles to the surface producing it

Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Description : Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Last Answer : (B) Called the angle of vision

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Description : Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Last Answer : (D) Wetted wall column

To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Description : To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Last Answer : (A) Interfacial surface between liquid and gas phase should be large

Which of the following is the most controlling factor for the rate of bubble detachment from the hot solid surface? (A) Liquid density (B) Liquid viscosity (C) Hot surface temperature (D) Interfacial tension

Description : Which of the following is the most controlling factor for the rate of bubble detachment from the hot solid surface? (A) Liquid density (B) Liquid viscosity (C) Hot surface temperature (D) Interfacial tension

Last Answer : (D) Interfacial tension

Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Description : Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Last Answer : Answer: Option D

Which of the following is not an advantage of fluidisation from transferoperation point of view?(A) Intimate contact of the fluid with all parts of the solid particles(B) Lower fluid pumping power requirement(C) Minimisation of temperature variation(D) Prevention of particle segregation

Description : Which of the following is not an advantage of fluidisation from transferoperation point of view? (A) Intimate contact of the fluid with all parts of the solid particles (B) Lower fluid pumping power requirement (C) Minimisation of temperature variation (D) Prevention of particle segregation

Last Answer : (B) Lower fluid pumping power requirement

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

A slat mould board scours better than a solid mould board because of smaller contact area resulting in a) Reduction of adhesive force b) Increase in soil pressure c) Both (a) and (b) d) None of the above

Description : A slat mould board scours better than a solid mould board because of smaller contact area resulting in a) Reduction of adhesive force b) Increase in soil pressure c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Last Answer : (C) Less than 180°

In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°

Description : In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°

Last Answer : (A) 120°

Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above

Description : Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above

Last Answer : d. all the above

Select the INCORRECT statement concerning the muscular system. a) Bones contact other bones at joints. b) Flexors decrease the angle of a joint. c) Adductors move a limb away from the midline. d) Tendons attach muscle to bone.

Description : Select the INCORRECT statement concerning the muscular system. a) Bones contact other bones at joints. b) Flexors decrease the angle of a joint. c) Adductors move a limb away from the midline. d) Tendons attach muscle to bone.

Last Answer : ANSWER: C -- ADDUCTORS MOVE A LIMB AWAY FROM THE MIDLINE. 

What is the solid angle subtended by the moon at any point of the Earth, given the diameter of the moon is 3474 km and its distance

Description : What is the solid angle subtended by the moon at any point of the Earth, given the diameter of the moon is 3474 km and its distance

Last Answer : What is the solid angle subtended by the moon at any point of the Earth, given the diameter of the moon ... its distance from the Earth 3.84 108 m?

The critical angle for a transport solid is 30°. Then its refractive index is (a) 2.5 (b) 1.8 (c) 1.5 (d) 2

Description : The critical angle for a transport solid is 30°. Then its refractive index is (a) 2.5 (b) 1.8 (c) 1.5 (d) 2

Last Answer : Ans:(d)

Radian is used to measure - (1) Temperature (2) Intensity of Flame (3) Angle (4) Solid Angle

Description : Radian is used to measure - (1) Temperature (2) Intensity of Flame (3) Angle (4) Solid Angle

Last Answer : (3) Angle Explanation: Kelvin is used to measure Temperature, Candela is used to measure Intensity of flame, Steredian is used to measure Solid Angle.

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

Which one of the following statements is correct? (A) (B) The cone subtended by an area on the sphere at the centre, is called the solid angle (C) The solid angle is equal to the ratio of the area on the sphere and the square of the radius of the sphere (D) All of these

Description : Which one of the following statements is correct? (A) (B) The cone subtended by an area on the sphere at the centre, is called the solid angle (C) The solid angle is equal to the ratio of the area on the sphere and the square of the radius of the sphere (D) All of these

Last Answer : Answer: Option D

Which one is olive drab and chemically treated to change color when it comes in contact with liquid nerve or blister?

Description : Which one is olive drab and chemically treated to change color when it comes in contact with liquid nerve or blister?

Last Answer : M9

Bile, an emulsifier liquid, is made by the liver and later stored within the gallbladder and released in the duodenum. Bile is composed of bile salts, cholesterol and bile pigments. Bile salts are detergents, amphiphilic molecules, i.e., molecules with a polar water-soluble portion and a non-polar fat-soluble portion. This feature allows bile salts to enclose fats inside water-soluble micelles in a process called emulsification for them to be in contact with intestinal lipases, enzymes that break fats into simpler fatty acids and glycerol. Digestion System - Image Diversity: gallbladder

Description : Bile, an emulsifier liquid, is made by the liver and later stored within the gallbladder and released in the duodenum. Bile is composed of bile salts, cholesterol and bile pigments. ... enzymes that break fats into simpler fatty acids and glycerol. Digestion System - Image Diversity: gallbladder

Last Answer : What is the adnexal organ of the digestive system in which bile is stored?

Spirit in contact with body gives cool sensation because it is – (1) liquid (2) transparent (3) highly volatile (4) a good conductor

Description : Spirit in contact with body gives cool sensation because it is – (1) liquid (2) transparent (3) highly volatile (4) a good conductor

Last Answer : (3) highly volatile Explanation: Spirit is very volatile. So when it is exposed, it evaporates rapidly to the air if released into the environment, producing a cool effect.

__________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Last Answer : (A) Dew point

For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Description : For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Last Answer : (C) High operating cost

Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Description : Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Last Answer : (B) Decreases tray efficiency

In gas-liquid contact operation, the number of ideal stages, N = (xa - xb )/(xb - x *b ). This is true when the stripping factor 'S' is (A) S > 1 (B) S < 1 (C) S = 1 (D) S = ∞

Description : In gas-liquid contact operation, the number of ideal stages, N = (xa - xb )/(xb - x *b ). This is true when the stripping factor 'S' is (A) S > 1 (B) S < 1 (C) S = 1 (D) S = ∞

Last Answer : (A) S > 1

A/an __________ system is exemplified by a vessel containing a volatile liquid in contact with its vapor. (A) Isolated (B) Closed (C) Open (D) None of these

Description : A/an __________ system is exemplified by a vessel containing a volatile liquid in contact with its vapor. (A) Isolated (B) Closed (C) Open (D) None of these

Last Answer : (C) Open

Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Description : Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Last Answer : (C) Liquid medium

_________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Vapor

Spirit in contact with body gives cool sensation because it is : (1) liquid (2) transparent (3) highly volatile (4) a good conductor

Description : Spirit in contact with body gives cool sensation because it is : (1) liquid (2) transparent (3) highly volatile (4) a good conductor

Last Answer : highly volatile

What is the difference between a solid, a liquid, and a gas?

Description : What is the difference between a solid, a liquid, and a gas?

Last Answer : Answer: Solids have a fixed shape and volume, while liquids have a fixed volume but take the shape of their container, and gases have neither a fixed shape nor volume and take the shape and ... of matter are determined by the strength of the forces between the particles that make up a substance.

What is the name of the process where a liquid or gas flows around a solid object, creating a force called drag?

Description : What is the name of the process where a liquid or gas flows around a solid object, creating a force called drag?

Last Answer : A: Fluid dynamics.

What is the name of the process where a solid turns into a liquid and then back into a solid?

Description : What is the name of the process where a solid turns into a liquid and then back into a solid?

Last Answer : A: Melting and freezing.

What is the name of the process where a liquid turns into a solid and then back into a liquid?

Description : What is the name of the process where a liquid turns into a solid and then back into a liquid?

Last Answer : A: Freezing and melting.

What is the name of the process where a liquid turns into a solid?

Description : What is the name of the process where a liquid turns into a solid?

Last Answer : A: Freezing.

What is the name of the process where a solid turns into a liquid?

Description : What is the name of the process where a solid turns into a liquid?

Last Answer : A: Melting.