Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Stage efficiency in a leaching process depends on the
(A) Time of contact between the solid and the solution
(B) Rate of diffusion of the solute through the solid and into the liquid
(C) Both (A) and (B)
(D) Vapour pressure of the solution
by

1 Answer

Answer :

(C) Both (A) and (B)
by

Related questions

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules. (b)It does not depends on number of particles of electrolyte solute in solution and does not depend on the nature of the solute particles. (c)It depends on the concentration of a non electrolyte solute in solution as well as on the nature of the solute molecules. (d)It depends on the concentration of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Description : Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of ... of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Last Answer : (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules.

Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Description : Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Last Answer : (B) Decreases tray efficiency

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Description : On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Description : Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Last Answer : (C) Binary phase distillation

A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure becomes 2.9 kPa at 298 K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Description : A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure ... K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Last Answer : For a very dilute solution ∴ Molecular mass, MB = 34 g/mol.

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Description : Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Last Answer : (A) Temperature

The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Description : The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Water vapour comes out from the plant leaf through the stomatal opening. Through the samestomatal opening carbon dioxide diffuses into the plant during photosynthesis. Reason out the above statements using one of following options. (a) The above processes happen only during night time. (b) One process occurs during day time and the other at night. (c) Both processes cannot happen simultaneously. (d) Both processes can happen together because the diffusion coefficient of water and CO2 is different

Description : Water vapour comes out from the plant leaf through the stomatal opening. Through the same stomatal opening carbon dioxide diffuses into the plant during photosynthesis. Reason out the above ... Both processes can happen together because the diffusion coefficient of water and CO2 is different

Last Answer : (d) Both processes can happen together because the diffusion coefficient of water and CO2 is different

The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Description : The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Last Answer : Answer: Option C

The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Description : If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Last Answer : B) Clausius-Clapeyron Equation

The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification (B) Heating and dehumidification at almost constant wet bulb temperature (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Description : Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification ... (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Last Answer : (B) Heating and dehumidification at almost constant wet bulb temperature

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Condensation process refers to : (1) Conversion of water into water vapour (2) Conversion of water vapour into solid form (3) Conversion of water into solid form (4) Conversion of water vapour into its liquid form

Description : Condensation process refers to : (1) Conversion of water into water vapour (2) Conversion of water vapour into solid form (3) Conversion of water into solid form (4) Conversion of water vapour into its liquid form

Last Answer : (4) Conversion of water vapour into its liquid form Explanation: Condensation is the change of the physical state of matter from gas phase into liquid phase. It is also defined as teh change in the state of water vapour to liquid water when in contact with a liquid or solid surface.

In the passive diffusion, solute molecules cross the membrane as a result of A- concentration difference B- pressure difference C- ionic difference D- all of these

Description : In the passive diffusion, solute molecules cross the membrane as a result of A- concentration difference B- pressure difference C- ionic difference D- all of these

Last Answer : concentration difference

Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction

Description : Separation of the isotopes of helium for scientific investigations is done by (A) Reverse osmosis (B) Thermal diffusion (C) Leaching (D) Solvent extraction

Last Answer : (B) Thermal diffusion

In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate phase R containing A at xB = 0.5 and xR = 0.05 respectively. The total mass of the extract phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Last Answer : (B) 8.89

Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution is proportional to the mole fraction in the vapour (C) Vapour pressure is equal to the product of the mole fraction and total pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Description : Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution ... pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Last Answer : (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid

At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole fractions of methanol are 0.1686 and 0.5714 respectively. Activity co-efficient of methanol is (A) 1.572 (B) 1.9398 (C) 3.389

Description : At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole ... respectively. Activity co-efficient of methanol is (A) 1.572 (B) 1.9398 (C) 3.389

Last Answer : (A) 1.572

Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Description : Activity co-efficient is a measure of the (A) Departure from ideal solution behaviour (B) Departure of gas phase from ideal gas law (C) Vapour pressure of liquid (D) None of these

Last Answer : (A) Departure from ideal solution behaviour

Critical pressure of a liquid is the pressure (a) above which liquid will remain liquid (b) above which liquid becomes gas (c) above which liquid becomes vapour (d) above which liquid becomes solid

Description : Critical pressure of a liquid is the pressure (a) above which liquid will remain liquid (b) above which liquid becomes gas (c) above which liquid becomes vapour (d) above which liquid becomes solid

Last Answer : Ans: a

Raoult's law applies to the (A) All liquid solutions (B) Non-ideal solution only (C) Non-volatile solute (D) Solvents

Description : Raoult's law applies to the (A) All liquid solutions (B) Non-ideal solution only (C) Non-volatile solute (D) Solvents

Last Answer : (D) Solvents

What can be done to make a solid solute dissolve faster in a liquid solute?

Description : What can be done to make a solid solute dissolve faster in a liquid solute?

Last Answer : Several factors affecting solubilty are: temperature, pressure, stirring.

What is a way to reclaim solid solute from a solution?

Description : What is a way to reclaim solid solute from a solution?

Last Answer : What is the answer ?

The rate at which dissolution occurs is LEAST dependent upon which one of the following factors: w) temperature x) pressure y) solution concentration z) solute surface area

Description : The rate at which dissolution occurs is LEAST dependent upon which one of the following factors: w) temperature x) pressure y) solution concentration z) solute surface area

Last Answer : ANSWER: X -- PRESSURE

For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Description : For absorbers, high pressure drop results in (A) Increased efficiency (B) Decreased efficiency (C) High operating cost (D) Better gas liquid contact

Last Answer : (C) High operating cost

Economics of 'Solvay Process' depends upon the efficiency of (A) Carbonating tower (B) Ammonia recovery (C) Ammonia recovery and size of the plant (D) Ammoniation of salt solution

Description : Economics of 'Solvay Process' depends upon the efficiency of (A) Carbonating tower (B) Ammonia recovery (C) Ammonia recovery and size of the plant (D) Ammoniation of salt solution

Last Answer : (C) Ammonia recovery and size of the plant

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Plate efficiency (A) Is a function of the mass transfer between liquid and vapour (B) Increases due to foaming (C) Increases due to liquid entrainment (D) Increases due to weeping and dumping of liquid

Description : Plate efficiency (A) Is a function of the mass transfer between liquid and vapour (B) Increases due to foaming (C) Increases due to liquid entrainment (D) Increases due to weeping and dumping of liquid

Last Answer : (A) Is a function of the mass transfer between liquid and vapour

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

The 'shanks system' of leaching (i.e., counter-current multiple contact leaching) is used for (A) Recovery of tannis from the tree barks and woods (B) Leaching sodium nitrate from Chilean nitrate bearing rock (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The 'shanks system' of leaching (i.e., counter-current multiple contact leaching) is used for (A) Recovery of tannis from the tree barks and woods (B) Leaching sodium nitrate from Chilean nitrate bearing rock (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems

Description : Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems

Last Answer : (A) Separation of a binary mixture by distillation

Any substance above its critical temperature exists as (A) Saturated vapour (B) Solid (C) Gas (D) Liquid

Description : Any substance above its critical temperature exists as (A) Saturated vapour (B) Solid (C) Gas (D) Liquid

Last Answer : (C) Gas

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Description : In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Last Answer : (C) Only one of the liquids may be pumped at any desired rate

The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Description : In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Last Answer : (B) Gas phase resistance controlled