Explain the rule to find specific heat of aqueous solutions.

Explain the rule to find specific heat of aqueous solutions.
by

1 Answer

Answer :

For aqueous solutions of salts, the specific heat can be estimated by assuming the specific heat of the
solution equal to that of the water alone. Thus, for a 15% by weight solution of sodium chloride in
water, the specific heat would be approximately 0.85.
by

Related questions

(a) Show on a diagram the transfer of electrons between the atoms in the formation of MgO. Write symbols of cation and anion present in MgO. (b) Name the solvent in which ionic compounds are generally soluble. (c) Why are aqueous solutions of ionic compounds able to conduct electricity? -Chemistry

Description : (a) Show on a diagram the transfer of electrons between the atoms in the formation of MgO. Write symbols of cation and anion present in MgO. (b) Name the solvent in which ionic compounds are generally soluble. (c) Why are aqueous solutions of ionic compounds able to conduct electricity? -Chemistry

Last Answer : (b) Ionic compounds are soluble in water. (c) It is because aqueous solutions consist of ions which can move freely in them and carry current.

Which of the following alkali metal ions has the lowest ionic mobility in aqueous solutions?

Description : Which of the following alkali metal ions has the lowest ionic mobility in aqueous solutions?

Last Answer : Which of the following alkali metal ions has the lowest ionic mobility in aqueous solutions? A. `Li^(+)` B. `Na^(+)` C. `Rb^(+)` D. `Cs^(+)`

Acidity of diprotic acids in aqueous solutions increases in the order

Description : Acidity of diprotic acids in aqueous solutions increases in the order

Last Answer : Acidity of diprotic acids in aqueous solutions increases in the order A. `H_(2)S lt H_(2)Se lt H_(2)Te` B. `H_ ... D. `H_(2)Se lt H_(2) Te ltt H_(2)S`

Acidity of diprotic acids in aqueous solutions increases in the order

Description : Acidity of diprotic acids in aqueous solutions increases in the order

Last Answer : Acidity of diprotic acids in aqueous solutions increases in the order A. `H_(2)S lt H_(2)Se lt H_(2)Te` B. `H_ ... D. `H_(2)Se lt H_(2) Te ltt H_(2)S`

A compound is made by mixing cobalt (III) nitrite and potassium nitrite solutions in the ratio of 1:3. The aqueous solution of the compound showed 4 p

Description : A compound is made by mixing cobalt (III) nitrite and potassium nitrite solutions in the ratio of 1:3. The aqueous solution of the compound showed 4 p

Last Answer : A compound is made by mixing cobalt (III) nitrite and potassium nitrite solutions in the ratio of 1:3. The aqueous ... )]` D. `K[Co(NO_(2))_(4)]`

Each of these are added to a mixture of aqueous solutions of iodide and `CHCl_(3)` separately. Which will give a positive test for iodine when the sol

Description : Each of these are added to a mixture of aqueous solutions of iodide and `CHCl_(3)` separately. Which will give a positive test for iodine when the sol

Last Answer : Each of these are added to a mixture of aqueous solutions of iodide and `CHCl_(3)` separately. ... . NaBr solution C. Chlorine water D. Bromine water

Beryllium oxide is treated separately with aqueous HCl and aqueous NaOH solutions.

Description : Beryllium oxide is treated separately with aqueous HCl and aqueous NaOH solutions.

Last Answer : Write balanced chemical equations : Beryllium oxide is treated separately with aqueous HCl and aqueous NaOH solutions.

What statement about Arrhenius acids is FALSETheir aqueous solutions are electrolytesTheir water solutions are called aqueous acids They increase the concentration of hydroxide ions in aqueous solutionThey are molecular compounds with hydrogen ions?

Description : What statement about Arrhenius acids is FALSETheir aqueous solutions are electrolytesTheir water solutions are called aqueous acids They increase the concentration of hydroxide ions in aqueous solutionThey are molecular compounds with hydrogen ions?

Last Answer : The answer is: They increase the concentration of hydroxide ions in aqueous solution.

__________ are used as corrosion inhibitor for iron & steel in aqueous solutions. (A) Phosphates (B) Chromates (C) Sulphates (D) Bi-carbonates

Description : __________ are used as corrosion inhibitor for iron & steel in aqueous solutions. (A) Phosphates (B) Chromates (C) Sulphates (D) Bi-carbonates

Last Answer : (B) Chromates

When dilute aqueous solutions of two salts are mixed, the process is associated with (A) Decrease in temperature (B) Increase in temperature (C) No change in temperature (D) Change in temperature which is a function of composition

Description : When dilute aqueous solutions of two salts are mixed, the process is associated with (A) Decrease in temperature (B) Increase in temperature (C) No change in temperature (D) Change in temperature which is a function of composition

Last Answer : B) Increase in temperature

A student prepares aqueous solutions of the following salts: Copper sulphate, ferrous sulphate, sodium sulphate and barium chloride. Write the color of each solution thus formed?

Description : A student prepares aqueous solutions of the following salts: Copper sulphate, ferrous sulphate, sodium sulphate and barium chloride. Write the color of each solution thus formed?

Last Answer : Answer. Copper sulphate (aq) – blue in color Ferrous sulphate (aq) – pale green in color Sodium sulphate (aq) – colorless Barium chloride (aq) – white in color

Which of the following aqueous solutions would hav the lowest boiling point? Would it be a 1.0 molal solution of: w) Hydrochloric acid x) Sodium Hydroxide y) Acetic Acid, z) Magnesium Chloride

Description : Which of the following aqueous solutions would hav the lowest boiling point? Would it be a 1.0 molal solution of: w) Hydrochloric acid x) Sodium Hydroxide y) Acetic Acid, z) Magnesium Chloride

Last Answer : ANSWER: Y -- ACETIC ACID

Amphoteric substances: w) act as either bases or acids x) precipatate from aqueous solutions y) salt out of basic solutions z) form emulsions in oils

Description : Amphoteric substances: w) act as either bases or acids x) precipatate from aqueous solutions y) salt out of basic solutions z) form emulsions in oils

Last Answer : ANSWER: W -- ACT AS EITHER BASES OR ACIDS

The theory of interionic attraction attributed to Debye and Hückel: w) was disproved by Arrhenius x) accounts quantitatively for the attraction between ions in dilute aqueous solutions y) does not account for kindered "ion-activity" z) accounts for intra-molecular polar bonds

Description : The theory of interionic attraction attributed to Debye and Hückel: w) was disproved by Arrhenius x) accounts quantitatively for the attraction between ions in dilute aqueous solutions y) does not account for kindered "ion-activity" z) accounts for intra-molecular polar bonds

Last Answer : ANSWER: X -- ACCOUNTS QUANTITATIVELY FOR THE ATTRACTION BETWEEN IONS IN DILUTE AQUEOUS SOLUTIONS

Which of the following is NOT a general property of hydroxide bases in aqueous solution? w) High solubility x) Bitter taste y) Ability to neutralize aqueous acid solutions z) Ability to change phenolphthalein from colorless to red

Description : Which of the following is NOT a general property of hydroxide bases in aqueous solution? w) High solubility x) Bitter taste y) Ability to neutralize aqueous acid solutions z) Ability to change phenolphthalein from colorless to red

Last Answer : ANSWER: W -- HIGH SOLUBILITY (The hydroxides of the alkali metals are soluble in water but all the other metal hydroxides are only moderately or sparingly soluble.)

A ____ is a rule of thumb, strategy, trick, simplification, or any other kind of device which drastically limits search for solutions in large problem spaces. A. Heuristic B. Critical C. Value based D. Analytical

Description : A ____ is a rule of thumb, strategy, trick, simplification, or any other kind of device which drastically limits search for solutions in large problem spaces. A. Heuristic B. Critical C. Value based D. Analytical

Last Answer : A. Heuristic

A ____ is a rule of thumb, strategy, trick, simplification, or any other kind of device which drastically limits search for solutions in large problem spaces. A. Heuristic B. Critical C. Value based D. Analytical

Description : A ____ is a rule of thumb, strategy, trick, simplification, or any other kind of device which drastically limits search for solutions in large problem spaces. A. Heuristic B. Critical C. Value based D. Analytical

Last Answer : A. Heuristic 

What is the difference between heat capacity and specific heat of a material ?

Description : What is the difference between heat capacity and specific heat of a material ?

Last Answer : The heat capacity of a material is the amount of heat transformed to raise unit mass of a material 1 degree in temperature. The specific heat of a material is the ratio of ... specified temperature. For most engineering purposes, heat capacities may be assumed numerically equal to;specific heats.

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Description : The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Last Answer : joule

What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Description : What refers to the heat needed to change the temperature of the substances without changing its phases?  a. Latent heat  b. Sensible heat  c. Specific heat  d. entropy

Last Answer : Sensible heat

Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Description : Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Last Answer : Specific Weight

The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature.  a. Charle’s Law  b. Boyle’s Law  c. Joule’s Law  d. Specific Heat

Last Answer : Boyle’s Law

Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Description : Specific heat capacity in SI unit.  a. kJ / kg.k  b. kJ / kg  c. kN / kg  d. None of the above

Last Answer : kJ / kg.k

The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Description : The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Last Answer : Specific Gravity

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Isolated System

A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Last Answer : torr

The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Description : The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Last Answer : specific heat

Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Description : Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Last Answer : isometric

Composite property applicable to all fluids  a. Entropy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : Composite property applicable to all fluids  a. Entropy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Enthalpy

_____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Entrophy

Amount of heat needed to rate the temperature of a substance by 1°C  a. Heat Exchange  b. Heat Engine  c. Specific Heat  d. None of the above

Description : Amount of heat needed to rate the temperature of a substance by 1°C  a. Heat Exchange  b. Heat Engine  c. Specific Heat  d. None of the above

Last Answer : Specific Heat

Specific heat ratio is always  a. > 1  b. < 1  c. = 1  d. none of the above

Description : Specific heat ratio is always  a. > 1  b. < 1  c. = 1  d. none of the above

Last Answer : > 1

The ratio of the change in energy in the form of the heat  a. relative density  b. specific heat  c. specific gravity  d. none of the above

Description : The ratio of the change in energy in the form of the heat  a. relative density  b. specific heat  c. specific gravity  d. none of the above

Last Answer : specific heat

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Description : From the steam table, determine the average constant pressure specific heat (c) of steam at 10 kPa and45.8 ˚C  A.1.79 kJ/ kg-˚C  B.10.28 kJ/ kg-˚C  C.30.57 kJ/ kg-˚C  D. 100.1 kJ/ kg-˚C Formula: h = c T ∆ ∆ From the steam table At 47.7 ˚C h= 2588.1 kJ/ kg At 43.8 ˚C h= 2581.1 kJ/ kg

Last Answer : 1.79 kJ/ kg-˚C

Which of the following cannot be measured by a thermometer?  a. Latent Heat  b. Sensible Heat  c. Specific Heat  d. Heat of Fusion

Description : Which of the following cannot be measured by a thermometer?  a. Latent Heat  b. Sensible Heat  c. Specific Heat  d. Heat of Fusion

Last Answer : Latent Heat

Heat which causes a change in temperature of a substance.  a. Latent heat  b. Sensible heat  c. Specific heat  d. Heat of Fusion

Description : Heat which causes a change in temperature of a substance.  a. Latent heat  b. Sensible heat  c. Specific heat  d. Heat of Fusion

Last Answer : Sensible heat

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

What predicts the approximate molar specific heat at high temperatures from the atomic weight?  A. Third law of thermodynamics  B. Law of Dulong and Petit  C. Mollier diagram  D. Pressure-enthalpy diagram

Description : What predicts the approximate molar specific heat at high temperatures from the atomic weight?  A. Third law of thermodynamics  B. Law of Dulong and Petit  C. Mollier diagram  D. Pressure-enthalpy diagram

Last Answer : Law of Dulong and Petit

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

What is the SI unit of specific heat capacity?  A. J/kg  B. J/kg °F ∙  C. J/kg °C ∙  D. J/°C

Description : What is the SI unit of specific heat capacity?  A. J/kg  B. J/kg °F ∙  C. J/kg °C ∙  D. J/°C

Last Answer : J/kg °C

What is the specific heat capacity of water in J/kg °C? ∙  A. 4581  B. 4185  C. 4518  D. 4815

Description : What is the specific heat capacity of water in J/kg °C? ∙  A. 4581  B. 4185  C. 4518  D. 4815

Last Answer : 4185

The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree.  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat capacity

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Description : What is the heat capacity of one gram of a substance?  A. Molecular heat  B. Specific heat  C. Latent heat  D. Molar heat

Last Answer : Specific heat