If a current of 1.5 A is maintained in a resistor of 10 2, then the energy dissipated in the resistor in 1 minute will be : (1) 15 W (2) 22.5 W (3) 135 W (4) 1350 W

If a current of 1.5 A is maintained in a resistor of 10 2, then the energy dissipated in the resistor in 1 minute will be : (1) 15 W (2) 22.5 W (3) 135 W (4) 1350 W
by

1 Answer

Answer :

(4) 1350 W Explanation: The potential difference or voltage, V, across two points is defined as the energy, E dissipated or transferred by a coulomb of charge 9, that moves through two points.
by
selected

Related questions

Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor isA. 15.6 WB. 15 WC. 16 WD. 17 W

Description : Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor is A. 15.6 W B. 15 W C. 16 W D. 17 W

Last Answer : 15.6 W

A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Description : A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Last Answer : ANSWER: 250 WATTS

The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?

Description : The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?  

Last Answer : ANSWER: 1000 JOULES

If power dissipated in the `9 Omega` resistor in the resistor shown is `36 W`, the potential difference across the `2 Omega` resistor is

Description : If power dissipated in the `9 Omega` resistor in the resistor shown is `36 W`, the potential difference across the `2 Omega` resistor is

Last Answer : If power dissipated in the `9 Omega` resistor in the resistor shown is `36 W`, the potential difference across the `2 ... 8 V B. 10 V C. 2 V D. 4 V

The constant potential difference across a 2 ohm resistor is 20 volts. How many watts of power are dissipated by this resistor?

Description : The constant potential difference across a 2 ohm resistor is 20 volts. How many watts of power are dissipated by this resistor?

Last Answer : ANSWER: 200 WATTS

Three resistors which have different values are connected in series. Which one of the following statements is correct? w) The potential drop across all three resistors is the same. x) The same current passes through all three resistors. y) The same power is dissipated by all three resistors.

Description : Three resistors which have different values are connected in series. Which one of the following statements is correct? w) The potential drop across all three resistors is the same. x) The same current passes through all three resistors. y) The same power is dissipated by all three resistors. 

Last Answer : ANSWER: X -- THE SAME CURRENT PASSES THROUGH ALL THREE RESISTORS. 

The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Description : The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Last Answer : ANSWER: Z -- 100 PERCENT

A boy rows 1500m in 1350 seconds against the stream and returns in 15 minutes. His rowing speed in still water is. A) 5km/hr B) 4km/hr C) 7km/hr D) 9km/hr

Description : A boy rows 1500m in 1350 seconds against the stream and returns in 15 minutes. His rowing speed in still water is. A) 5km/hr B) 4km/hr C) 7km/hr D) 9km/hr

Last Answer : ANSWER : A  Explanation:  Rate upstream = (1500 / 1350) m/s = (150/135) m/s = 10/9 m/s  Rate downstream = (1500 / 900)m/s = (15/9)m/s  = 5/3 m/s  Rate in still water = ½ [ a+ b]  = ½[10 / 9 + 5 /3 ... +15 / 9]  = ½[25/9]  = 25/18 m/s  = (25/18) * (18/5)km/hr  speed in still water = 5km/hr

A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Description : A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Last Answer : ANSWER: X -- 1/3

A 45 kilogram bicyclist on a 5 kilogram bicycle rides down a 50 meter high hill with her brakes partially on. Her speed at the bottom of the hill is 10 meters per second. How many kilojoules of heat were dissipated by the cyclist's brakes?

Description : A 45 kilogram bicyclist on a 5 kilogram bicycle rides down a 50 meter high hill with her brakes partially on. Her speed at the bottom of the hill is 10 meters per second. How many kilojoules of heat were dissipated by the cyclist's brakes?

Last Answer : ANSWER: 22.5 KILOJOULES or 22.0 KILOJOULES (based on 9.8 m/s2)

M and N invested in a business in which M invests Rs.385 more than N. N invested for 9months while M invested for 5months. If M get Rs.65 more than N out of profit of Rs.1350. Then then total amount invested in the business approximately is, A) 1452 B) 7413 C) 6298 D) 5778

Description : M and N invested in a business in which M invests Rs.385 more than N. N invested for 9months while M invested for 5months. If M get Rs.65 more than N out of profit of Rs.1350. Then then total amount invested in the business approximately is, A) 1452 B) 7413 C) 6298 D) 5778

Last Answer : Answer: B)  Let investment of M is X + 385  Let investment of N is X  Profit earned of M&N is,  M/N=(X+385)*5 /x *9-------> (1)  Profit of M =65 +profit of N  Total profit = 1350=65 + ... =(x + 385) *5/(x*9)  X =392.01  Total investment =(392+385)*5+(392*9)  =Rs.7413

Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds?

Description : A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds? 

Last Answer : ANSWER: 500 JOULES

If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Description : If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Last Answer : 500Ω

As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow through 'R1' will equal the current flow through 'R2' C. the energy dissipated in 'R1' will be the same as the energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Description : As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow ... energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Last Answer : Answer: D

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Description : A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Last Answer : ANSWER: Z -- 3 AMPERES

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

A car covers a distance of 1120 metres in 1 minute whereas a bus covers a distance of 56 kms in 44 minutes. What is the ratio of their speed? a) 22:25 b) 25:22 c) 11:15 d) 15:11

Description : A car covers a distance of 1120 metres in 1 minute whereas a bus covers a distance of 56 kms in 44 minutes. What is the ratio of their speed? a) 22:25 b) 25:22 c) 11:15 d) 15:11

Last Answer : A Speed of the Car = 1120 m/minute Speed of the bus=56 kms in 44 minutes =56/44 km/m =56000/44 m/mints Speed of the car : Speed of the bus, =1120:56000/44 =280:14000/44 =20:1000/44 =880:1000 =88:100 Required ratio =22:25

There were 32 boys in a hostel. If the number of boys be increased by 15, then the expenditure on food increases by Rs. 43 per day while the average of expenditure of boys is reduced by Rs. 2. What was the initial expenditure on food per day? A) Rs.108.2 B) Rs.125.6 C) Rs.135.8 D) Rs.144.5

Description : There were 32 boys in a hostel. If the number of boys be increased by 15, then the expenditure on food increases by Rs. 43 per day while the average of expenditure of boys is reduced by Rs. 2. What was the initial expenditure on food per day? A) Rs.108.2 B) Rs.125.6 C) Rs.135.8 D) Rs.144.5

Last Answer : Answer: A)  Let initial expense of 32 boys = Rs. x average expense of 32 boys = x/32 average expense of 47 boys = (x + 43)/ 47 then, (x/32) - ((x+43)/47) = 2  x= Rs.108.28

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... B. 160 W C. `37.5 W` D. 60 W

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... `37.5` W B. 75W C. 80W D. 40 W

The power dissipated in a resistance is given by? (1) V²/R (2) IV (3) All of these (4) I²R

Description : The power dissipated in a resistance is given by? (1) V²/R (2) IV (3) All of these (4) I²R

Last Answer : (3) All of these Explanation: Any resistor in a circuit that has a voltage drop acrossit dissipates electrical power. This electrical power is converted into heat energy hence all resistors have a power rating.

How long ago was 1350 AD?

Description : How long ago was 1350 AD?

Last Answer : 50 + 600 + 18 = 668

What does 1350 times 8 equal?

Description : What does 1350 times 8 equal?

Last Answer : 10800

Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Description : Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Last Answer : (A) 1100

What is the combustion temperature range in cement kiln incineration? a) 1300-1600 b) 1350-1650 c) 1250-1450 d) 1235-1600

Description : What is the combustion temperature range in cement kiln incineration? a) 1300-1600 b) 1350-1650 c) 1250-1450 d) 1235-1600

Last Answer : 1350-1650

In an election between two candidates, the winner secured 85% of the total votes cast and wins by a majority of 6300 votes. How many votes did the losing candidate get? a) 1350 b) 2479 c) 3467 d) 5789

Description : In an election between two candidates, the winner secured 85% of the total votes cast and wins by a majority of 6300 votes. How many votes did the losing candidate get? a) 1350 b) 2479 c) 3467 d) 5789

Last Answer : Answer: A  Total votes cast = 100%  Winner gets = 85%  Loser gets = 100 – 85 = 15%  Majority = Votes secured by winner – Votes secured by loser  = 85% - 15%  =70% =6300  Votes by the losing candidate = x = 15%  x = (15 * 6300)/70 x =(94500/70) x = 1350

Range of Television Broadcasting is confined to a limited distance because (a) Long waves are used (b) Short waves are absorbed by atmosphere (c) Energy of the waves is dissipated (d) Earth is spherical in shape

Description : Range of Television Broadcasting is confined to a limited distance because (a) Long waves are used (b) Short waves are absorbed by atmosphere (c) Energy of the waves is dissipated (d) Earth is spherical in shape

Last Answer : Ans:(d)

The process through which excess of light energy is dissipated in photosynthesis is known as (1) Quenching (2) Scavenging (3) Photolysis (4) Photophosphatylation

Description : The process through which excess of light energy is dissipated in photosynthesis is known as (1) Quenching (2) Scavenging (3) Photolysis (4) Photophosphatylation

Last Answer : (1) Quenching Explanation: Quenching is a process in which absorbed light energy is dissipated as heat and does not take part in photochemistry. The phenomenon involves quenching of chlorophyll a (Chia) fluorescence, which is induced under steady-state illumination.

In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Description : In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Last Answer : (A) Frictional resistance

According to the untuned dry fraction damper amplitude reduction will be A) Lesser if lesser amount of energy dissipated B) Greater if greater amount of energy dissipated C) Greater if lesser amount of energy dissipated D) Lesser if greater amount of energy dissipated

Description : According to the untuned dry fraction damper amplitude reduction will be A) Lesser if lesser amount of energy dissipated B) Greater if greater amount of energy dissipated C) Greater if lesser amount of energy dissipated D) Lesser if greater amount of energy dissipated

Last Answer : B) Greater if greater amount of energy dissipated

In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ a) Frictional resistance b) Work done c) Fluid pressure d) Air pressure

Description : In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ a) Frictional resistance b) Work done c) Fluid pressure d) Air pressure

Last Answer : a) Frictional resistance

The energy dissipated by a resistive load is most often in what form?

Description : The energy dissipated by a resistive load is most often in what form?

Last Answer : Heat.

The process through which excess of light energy is dissipated in photosynthesis is known as (1) Quenching (2) Scavenging (3) Photolysis (4) Photophosphorylation

Description : The process through which excess of light energy is dissipated in photosynthesis is known as (1) Quenching (2) Scavenging (3) Photolysis (4) Photophosphorylation

Last Answer : Quenching

A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Description : A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Last Answer : ANSWER: W -- 25 OHMS

Two identical resistors are connected in parallel and consume 200 watts together. A third identical resistor is added in parallel. The total power consumed is: w) 100 watts x) 200 watts y) 300 watts z) 400 watts

Description : Two identical resistors are connected in parallel and consume 200 watts together. A third identical resistor is added in parallel. The total power consumed is: w) 100 watts x) 200 watts y) 300 watts z) 400 watts

Last Answer : ANSWER: Y -- 300 WATTS

A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Description : A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Last Answer : ANSWER: Z -- 300 OHM RESISTOR IN PARALLEL

A cistern is filled in 15 hours by three pipes P, Q and R. The pipe R is thrice as fast as Q and Q is thrice as fast as P. How much time will pipe P alone take to fill the tank? A) 120 hrs B) 195 hrs C) 135 hrs D) Cannot be determined

Description : A cistern is filled in 15 hours by three pipes P, Q and R. The pipe R is thrice as fast as Q and Q is thrice as fast as P. How much time will pipe P alone take to fill the tank? A) 120 hrs B) 195 hrs C) 135 hrs D) Cannot be determined 

Last Answer : B Suppose pipe P alone takes x hours to fill the tank. Then, pipes Q and R will take x/3 and x/9hours respectively to fill the tank. 1/x + 3/x + 9/x = 1/15 13/x = 1/15 => x = 195 hrs.

An shopkeeper has 15 models of cup and 9 models of saucer. In how many ways can he make a pair of cup and saucer? A) 100 B) 80 C) 110 D) 135

Description : An shopkeeper has 15 models of cup and 9 models of saucer. In how many ways can he make a pair of cup and saucer? A) 100 B) 80 C) 110 D) 135

Last Answer : Answer: D) He has 15 patterns of cup and 9 model of saucer A cup can be selected in 15 ways. A saucer can be selected in 9 ways. Hence one cup and one saucer can be selected in 15×9 ways =135 ways

If the rms voltage drop across a 15 kilt resistor is 16 V, the peak current through the resistor is : -

Description : If the rms voltage drop across a 15 kilt resistor is 16 V, the peak current through the resistor is : -  a) 15 mA b) 1.5 mA c) 10 mA d) 1 mA

Last Answer : If the rms voltage drop across a 15 kilt resistor is 16 V, the peak current through the resistor is : - 1.5 mA

What is the direction of current through the load resistor in the circuit shown in the illustration? EL-0085 A. Always from point 'Z' to the grounded end. B. Always from the grounded end to point 'Z'. C. It depends on the instantaneous polarity at point 'W'. D. It cannot be determined without a directional ammeter.

Description : What is the direction of current through the load resistor in the circuit shown in the illustration? EL-0085 A. Always from point 'Z' to the grounded end. B. Always from the grounded end to ... on the instantaneous polarity at point 'W'. D. It cannot be determined without a directional ammeter.

Last Answer : Answer: B

Current through each resistor when they are connected in series is A. different B. same C. can be both A and B D. decreasing

Description : Current through each resistor when they are connected in series is A. different B. same C. can be both A and B D. decreasing

Last Answer : same

To limit current in LED, resistor should be connected in A. parallel B. series C. evacuated flask D. ionized tube

Description : To limit current in LED, resistor should be connected in A. parallel B. series C. evacuated flask D. ionized tube

Last Answer : series

Ratio of voltages is inverse ratio of the A. transformer B. resistor C. iron core D. current

Description : Ratio of voltages is inverse ratio of the A. transformer B. resistor C. iron core D. current

Last Answer : current

A component that allows only unidirectional current to pass through it is A. resistor B. inductor C. transformer D. diode

Description : A component that allows only unidirectional current to pass through it is A. resistor B. inductor C. transformer D. diode

Last Answer : diode