Heat flows as a result of difference of (1) Temperature (2) Density (3) mass (4) Volume

Heat flows as a result of difference of (1) Temperature (2) Density (3) mass (4) Volume
by

1 Answer

Answer :

(1) Temperature Explanation: Heat flow moves energy from a higher temperature to a lower temperature. The bigger the difference in temperature between two objects, the faster heat flows between them.
by
selected

Related questions

A piece of paper and a cricket ball are dropped from the same height. Under which of the following conditions do both reach the surface simultaneously? (1) They must have the same volume (2) They must have the same density (3) They must have the same mass (4) They must be dropped in vacuum

Description : A piece of paper and a cricket ball are dropped from the same height. Under which of the following conditions do both reach the surface simultaneously? (1) They must have the same volume (2) They must have the same density (3) They must have the same mass (4) They must be dropped in vacuum

Last Answer : (4) They must be dropped in vacuum Explanation: When a piece of paper and a cricket ball are dropped from the same height, they reach the surface at different time because the shape of the paper ... occurring on them and this leads to a conclusion that both the article reaches at the same time.

The amount of matter in a ball of steel is its – (1) Weight (2) Mass (3) Density (4) Volume

Description : The amount of matter in a ball of steel is its – (1) Weight (2) Mass (3) Density (4) Volume

Last Answer : (2) Mass Explanation: In simple terms, mass is the amount of matter in an object, and is measured in grams. Under normal circumstances, and as long as it remains intact, an object will always have the same mass, i.e. there will always be the same amount of matter in it.

The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : (1) atmospheric pressure Explanation: The boiling point corresponds of water to the ternperature at which its vapour pressure equals the surrounding environmental pressure. So it is dependent on ... pressure decreases. As this pressure decreases, the boiling point of the water also decreases.

When a piece of stone is immersed in water, it displaces water of equal – (1) Density (2) Specific gravity (3) Mass (4) Volume

Description : When a piece of stone is immersed in water, it displaces water of equal – (1) Density (2) Specific gravity (3) Mass (4) Volume

Last Answer : (3) Mass Explanation: Archimedes' Principle states that upward buoyant force exerted on a body immersed in a fluid is equal to the weight of the fluid the body displaces.

Two rods, one of copper and other of steel, experience the same up thrust when placed in water. Thus, both have – (1) equal volume (2) equal weight (3) equal density (4) equal mass

Description : Two rods, one of copper and other of steel, experience the same up thrust when placed in water. Thus, both have – (1) equal volume (2) equal weight (3) equal density (4) equal mass

Last Answer : (1) equal volume Explanation: When a body is placed in water, the upthrust or buoyant force acting on it depends upon the following factors: (1) Volume of the body submerged in the liquid - (V), or volume of ... (V); (ft) Density of the liquid - (d); and (Hi) Acceleration due to gravity In-line.

Concentration of matter in a material is A. volume B. mass C. density D. weight

Description : Concentration of matter in a material is A. volume B. mass C. density D. weight

Last Answer : density

The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : atmospheric pressure

The amount of matter in a ball of steel is its : (1) Weight (2) Mass (3) Density (4) Volume

Description : The amount of matter in a ball of steel is its : (1) Weight (2) Mass (3) Density (4) Volume

Last Answer : Mass

When a piece of stone is immersed in water, it displaces water of equal (1) Density (2) Specific gravity (3) Mass (4) Volume

Description : When a piece of stone is immersed in water, it displaces water of equal (1) Density (2) Specific gravity (3) Mass (4) Volume

Last Answer : Mass

Two rods, one of copper and other of steel, experience the same upthrust when placed in water.Thus, both have (1) equal volume (2) equal weight (3) equal density (4) equal mass

Description : Two rods, one of copper and other of steel, experience the same upthrust when placed in water.Thus, both have (1) equal volume (2) equal weight (3) equal density (4) equal mass

Last Answer : equal volume

A piece of paper and a cricket ball are dropped from the same height. Under which of the following conditions do both reach the surface simultaneously ? (1) They must have the same volume (2) They must have the same density (3) They must have the same mass (4) They must be dropped in vacuum

Description : A piece of paper and a cricket ball are dropped from the same height. Under which of the following conditions do both reach the surface simultaneously ? (1) They must have the same volume (2) They must have the same density (3) They must have the same mass (4) They must be dropped in vacuum

Last Answer : They must be dropped in vacuum

The energy that flows from higher temperature object to a lower temperature object because of the difference in temperature is called  a. heat  b. temperature  c. thermodynamics cycle  d. energy flow

Description : The energy that flows from higher temperature object to a lower temperature object because of the difference in temperature is called  a. heat  b. temperature  c. thermodynamics cycle  d. energy flow

Last Answer : heat

According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Description : According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Last Answer : Answer : c

Why are there winds? (a) Because air flows down-hill. (b) Because of temperature differences. (c) Because air flows from high density to low density. (d) Because air flows along isobars.

Description : Why are there winds? (a) Because air flows down-hill. (b) Because of temperature differences. (c) Because air flows from high density to low density. (d) Because air flows along isobars.

Last Answer : (b) Because of temperature differences.

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option A

The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option B

Which of the following is not the intensive property  (a) pressure  (b) temperature  (c) density  (d) heat  (e) specific volume.

Description : Which of the following is not the intensive property  (a) pressure  (b) temperature  (c) density  (d) heat  (e) specific volume.

Last Answer : Answer : d

Which of the following quantities is not the property of the system  (a) pressure  (b) temperature  (c) specific volume  (d) heat  (e) density.

Description : Which of the following quantities is not the property of the system  (a) pressure  (b) temperature  (c) specific volume  (d) heat  (e) density.

Last Answer : Answer : d

Boyle's law is a relationship between – (1) Pressure and volume (2) Volume and temperature (3) Volume and density (4) Pressure and temperature

Description : Boyle's law is a relationship between – (1) Pressure and volume (2) Volume and temperature (3) Volume and density (4) Pressure and temperature

Last Answer : (1) Pressure and volume Explanation: Boyle's law states that the absolute pressure and volume of a given mass of confined gas are inversely proportional, if the temperature remains unchanged within a ... law was named after chemist and physicist Robert Boyle, who published the original law in 1662.

While Young's modulus ‘E’ relates to change in length and bulk modulus ‘K’ relates to change in volume, modulus of rigidity ‘G’ relates to change in: A. weight B. density C. shape D. temperature

Description : While Young's modulus ‘E’ relates to change in length and bulk modulus ‘K’ relates to change in volume, modulus of rigidity ‘G’ relates to change in: A. weight B. density C. shape D. temperature

Last Answer : . shape

Boyle’s law is a relationship between (1) Pressure and volume (2) Volume and temperature (3) Volume and density (4) Pressure and temperature

Description : Boyle’s law is a relationship between (1) Pressure and volume (2) Volume and temperature (3) Volume and density (4) Pressure and temperature

Last Answer :  Pressure and volume

Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Description : Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Last Answer : (B) Temperature distribution is dependent on time

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Description : The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Last Answer : Answer: B

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Description : Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Last Answer : Answer : a

According to kinetic theory of gases, the absolute zero temperature is attained when  (a) volume of the gas is zero  (b) pressure of the gas is zero  (c) kinetic energy of the molecules is zero  (d) specific heat of gas is zero  (e) mass is zero.

Description : According to kinetic theory of gases, the absolute zero temperature is attained when  (a) volume of the gas is zero  (b) pressure of the gas is zero  (c) kinetic energy of the molecules is zero  (d) specific heat of gas is zero  (e) mass is zero.

Last Answer : Answer : c

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

If two different gases have the same volume, temperature, and pressure and behave like ideal gases, they will also be identical in which one of the following ways? w) average molecular velocity x) total mass y) total molecular kinetic energy z) average momentum per molecule

Description : If two different gases have the same volume, temperature, and pressure and behave like ideal gases, they will also be identical in which one of the following ways? w) average molecular velocity x) total mass y) total molecular kinetic energy z) average momentum per molecule

Last Answer : ANSWER: Y -- TOTAL MOLECULAR KINETIC ENERGY

A long-term effect of which of the following procedures post acute MI induces angioneogenesis? a) Transmyocardial laser revascularization TNR procedures usually involves making 20 to 40 channels in ventricular muscle. It is thought that some blood flows into the channels, decreasing the ischemia directly. Within the next few days to months, the channels close as a result of the body’s inflammatory process of healing a wound and new blood vessels form as a result of the inflammatory process.

Description : A long-term effect of which of the following procedures post acute MI induces angioneogenesis? a) Transmyocardial laser revascularization TNR procedures usually involves making 20 to 40 channels in ventricular muscle. ... e.g., clopidigrel [Plavix]) therapy for 2 weeks and lifetime use of aspirin).

Last Answer : a) Transmyocardial laser revascularization TNR procedures usually involves making 20 to 40 channels in ventricular muscle. It is thought that some blood flows into the channels, decreasing the ischemia directly. ... healing a wound and new blood vessels form as a result of the inflammatory process.

Circulation of gases in furnace is caused by the (A) Change in volume during a change of temperature (B) Difference in density between hot and cold gases (C) Furnace pressure in conjunction with draft in flues(D) All (A), (B) and (C

Description : Circulation of gases in furnace is caused by the (A) Change in volume during a change of temperature (B) Difference in density between hot and cold gases (C) Furnace pressure in conjunction with draft in flues (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

he pressure drop per unit length of pipe incurred by a fluid 'X' flowing through pipe is Δp. If another fluid 'Y' having both the specific gravity & density just double of that of fluid 'X', flows through the same pipe at the same flow rate/average velocity, then the pressure drop in this case will be (A) Δp (B) 2Δp (C) Δp 2 (D) Δp/2

Description : he pressure drop per unit length of pipe incurred by a fluid 'X' flowing through pipe is Δp. If another fluid 'Y' having both the specific gravity & density just double of that of fluid 'X', flows through the same pipe ... then the pressure drop in this case will be (A) Δp (B) 2Δp (C) Δp 2 (D) Δp/2

Last Answer : (B) 2Δp

How to find Mass from density and volume?

Description : How to find Mass from density and volume?

Last Answer : Here

Lin an experiment to determine the volume of an object, mass and density are recorded as m = (5 ± 0.15) kg and p = (5 ± 0.2) kg m^3 respectively.

Description : Lin an experiment to determine the volume of an object, mass and density are recorded as m = (5 ± 0.15) kg and p = (5 ± 0.2) kg m^3 respectively.

Last Answer : Lin an experiment to determine the volume of an object, mass and density are recorded as ... Calculate percentage error in the measurement of volume.

If a piece of rock has a volume of 0.73 L and a mass of 1524 g what is the density of the rock in gmL?

Description : If a piece of rock has a volume of 0.73 L and a mass of 1524 g what is the density of the rock in gmL?

Last Answer : The density is 2,09 g/cm3.

Why does mass equal density times volume?

Description : Why does mass equal density times volume?

Last Answer : What is the answer ?

What would a object with a 22.6 density and 15.1 volume be in mass?

Description : What would a object with a 22.6 density and 15.1 volume be in mass?

Last Answer : It would be 341.26 units of mass.

What is the density of a metal block that has a mass of g and a volume of cm?

Description : What is the density of a metal block that has a mass of g and a volume of cm?

Last Answer : Density = g / CmAssuming g is in a unit of mass, and Cm is in a unit of volume,If these are not the units of the quantities given then the resultwill not be density, instead it will be gibberish! The units of thequantities going into an equation are more important than thevalues.

A piece of paper and a cricket ball are dropped from the same height. Under which of the following conditions do both reach the surface simultaneously? (1) They must have the same volume (2) They must have the same density (3) They must have the same mass (4) They must be dropped in vacuum

Description : A piece of paper and a cricket ball are dropped from the same height. Under which of the following conditions do both reach the surface simultaneously? (1) They must have the same volume (2) They must have the same density (3) They must have the same mass (4) They must be dropped in vacuum

Last Answer : (4) They must be dropped in vacuum Explanation: When a piece of paper and a cricket ball are dropped from the same height, they reach the surface at different time because the shape of the paper ... occurring on them and this leads to a conclusion that both the article reaches at the same time.

Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Description : Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Last Answer : (A) m/ρ . Vp

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

If 850 kg liquid occupies volume of one cubic meter, men 0.85 represents its (A) Specific weight (B) Specific mass (C) Specific gravity (D) Specific density

Description : If 850 kg liquid occupies volume of one cubic meter, men 0.85 represents its (A) Specific weight (B) Specific mass (C) Specific gravity (D) Specific density

Last Answer : Answer: Option C

_______ of a body means the force of the gravity Fg on the body  a. Mass  b. Weight  c. Density  d. Volume

Description : _______ of a body means the force of the gravity Fg on the body  a. Mass  b. Weight  c. Density  d. Volume

Last Answer : Weight

______ of a Body is the absolute quantity of a matter in it.  a. Mass  b. Weight  c. Density  d. Volume

Description : ______ of a Body is the absolute quantity of a matter in it.  a. Mass  b. Weight  c. Density  d. Volume

Last Answer : Mass

Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Description : Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Last Answer : Density

Which is NOT an extensive property of thermodynamics?  A. Density  B. Mass  C. Volume  D. Energy

Description : Which is NOT an extensive property of thermodynamics?  A. Density  B. Mass  C. Volume  D. Energy

Last Answer : Density