In the process of magnetization of a bar (1) The entire bulk of the bar gets magnetized (2) Only the surface of the bar gets magnetized (3) Only the ends of the bar get magnetized (4) Only some parts of the outer layers of the bar get magnetized

In the process of magnetization of a bar (1) The entire bulk of the bar gets magnetized (2) Only the surface of the bar gets magnetized (3) Only the ends of the bar get magnetized (4) Only some parts of the outer layers of the bar get magnetized
by

1 Answer

Answer :

(1) The entire bulk of the bar gets magnetized Explanation: In classical electromagnetism, magnetization or magnetic polarization is the vector field that expresses the density of permanent or induced magnetic dipole moments in a magnetic material. The origin of the magnetic moments responsible for magnetization can be either microscopic electric currents resulting from the motion of electrons in atoms, or the spin of the electrons or the nuclei. In the process of magnetization of a bar, the entire bulk of the bar gets magnetized.
by
selected

Related questions

In the process of magnetisation of a bar (1) The entire bulk of the bar gets magnetised (2) Only the surface of the bar gets magnetised (3) Only the ends of the bar get magnetised (4) Only some parts of the outer layers of the bar get magnetised

Description : In the process of magnetisation of a bar (1) The entire bulk of the bar gets magnetised (2) Only the surface of the bar gets magnetised (3) Only the ends of the bar get magnetised (4) Only some parts of the outer layers of the bar get magnetised

Last Answer : The entire bulk of the bar gets magnetised

As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Description : As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Last Answer : Answer: C

Pick up correct statement from the following: (A) The air from outer portion of cyclones gets lifted for causing precipitation (B) The air from central portion of cyclone's gets lifted for causing precipitation (C) The air from entire surface of the cyclones gets lifted for causing precipitation (D) None of those

Description : Pick up correct statement from the following: (A) The air from outer portion of cyclones gets lifted for causing precipitation (B) The air from central portion of cyclone's gets lifted for ... The air from entire surface of the cyclones gets lifted for causing precipitation (D) None of those

Last Answer : Answer: Option B

the outer layers of onions rotted in the ground. removed the rotten parts.

Description : the outer layers of onions rotted in the ground. removed the rotten parts.

Last Answer : Need Answer

At high pressure, the entire metal surface gets covered by a mono molecular layer of the gas. What is the order of the process ?

Description : At high pressure, the entire metal surface gets covered by a mono molecular layer of the gas. What is the order of the process ?

Last Answer : Ans. Zero order. 

Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This entire process is generally known as (A) Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Description : Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This ... Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Last Answer : (D) All the above

Exobiology deals with the study of - (1) external characters of living organisms (2) life on the surface of the earth (3) life in the outer layers of atmosphere (4) life in other planets and space

Description : Exobiology deals with the study of - (1) external characters of living organisms (2) life on the surface of the earth (3) life in the outer layers of atmosphere (4) life in other planets and space

Last Answer : (4) life in other planets and space Explanation: Exobiology is the branch of science that deals with the possibility and likely nature of life on other planets or in space. The primary ... processes leading to the origin evolution and distribution of life on Earth or elsewhere in the universe.

Exobiology deals with the study of : (1) external characters of living organisms (2) life on the surface of the earth (3) life in the outer layers of atmosphere (4) life in other planets and space

Description : Exobiology deals with the study of : (1) external characters of living organisms (2) life on the surface of the earth (3) life in the outer layers of atmosphere (4) life in other planets and space

Last Answer : life in other planets and space

____________ is a type of non-volatile memory composed of a thin layer of material that can be easily magnetized in only one direction. A. Bubble memory B. RAM C. SRAM D. None of the Above

Description : ____________ is a type of non-volatile memory composed of a thin layer of material that can be easily magnetized in only one direction. A. Bubble memory B. RAM C. SRAM D. None of the Above

Last Answer : A. Bubble memory

The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Description : The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Last Answer : (1) hammering a magnet Explanation: Hammering a rod will either allow it to become slightly magnetic inlaid along a magnetic field (i.e.North - South) or demagnetize it if laid across the field lines (i.e. East-West). A current passing through a coil will produce a magnetic field.

Entropy is a measure of: w) magnetization x) disorder y) temperature z) heat

Description : Entropy is a measure of: w) magnetization x) disorder y) temperature z) heat

Last Answer : ANSWER: X -- DISORDER

What was the reason sculptures found in guatemala were magnetized in 11 'potbelly sculptures, six heads and five bodies?'?

Description : What was the reason sculptures found in guatemala were magnetized in 11 'potbelly sculptures, six heads and five bodies?'?

Last Answer : Ancient stone "potbelly" sculptures on display in a park in Guatemala are magnetized on certain spots, suggesting the pre-Columbian civilization that made them had a practical knowledge of ... . Previous studies of the sculptures had suggested several had magnetic anomalies on their surfaces.

Are paper clips picked up by a magnet permanently magnetized?

Description : Are paper clips picked up by a magnet permanently magnetized?

Last Answer : The paper clips will retain a weak magnetic field, and could beclassified as temporary magnets, but not permanent magnets. Thatweak field the paper clips hang on to will dissipate in time.

What are four sources that can cause magnetic heads to become magnetized?

Description : What are four sources that can cause magnetic heads to become magnetized?

Last Answer : a. During ac power losses. b. During testing. c. Because of stray magnetic fields. d. From normal use.

The phenomenon of magnetostriction occurs when a ferromagnetic substance is magnetized resulting in

Description : The phenomenon of magnetostriction occurs when a ferromagnetic substance is magnetized resulting in (a) Heating (b) Small changes in its dimensions (c) Small changes in its crystal structure (d) Some change in its mechanical properties

Last Answer : The phenomenon of magnetostriction occurs when a ferromagnetic substance is magnetized resulting in Small changes in its dimensions 

When a ferromagnetic substance is magnetized, small changes in dimensions occur. Such a phenomenon is

Description : When a ferromagnetic substance is magnetized, small changes in dimensions occur. Such a phenomenon is known as

Last Answer : When a ferromagnetic substance is magnetized, small changes in dimensions occur. Such a phenomenon is known as Magnetostriction.

The energy in a magnetic material is due to which process? a) Emf b) Magnetization c) Magnetostriction d) Polarization

Description : The energy in a magnetic material is due to which process? a) Emf b) Magnetization c) Magnetostriction d) Polarization

Last Answer : b) Magnetization

The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

Description : The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

Last Answer : The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

With regard to the cornea: a. photokeratitis occurs with wavelength of 270nm b. microvilli are found in the outer layer of the epithelium c. the turnover of the corneal epithelium typically takes 30 days d. the corneal epithelium is about 10 layers in thickness

Description : With regard to the cornea: a. photokeratitis occurs with wavelength of 270nm b. microvilli are found in the outer layer of the epithelium c. the turnover of the corneal epithelium typically takes 30 days d. the corneal epithelium is about 10 layers in thickness

Last Answer : photokeratitis occurs with wavelength of 270nm

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

A vessel is said to be thin if a. Its wall has less thickness b. Stresses are uniform over the entire thickness c. Stresses vary at inner and at outer radius d. None of the above

Description : A vessel is said to be thin if a. Its wall has less thickness b. Stresses are uniform over the entire thickness c. Stresses vary at inner and at outer radius d. None of the above

Last Answer : b. Stresses are uniform over the entire thickness

What's a movie that starts with a character about to die, that then has their entire life flash before their eyes, and then ends with them actually dying?

Description : What's a movie that starts with a character about to die, that then has their entire life flash before their eyes, and then ends with them actually dying?

Last Answer : Isn't that the plot to Jacob's Ladder?

A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be (A) WL (B) WL/8 (C) WL/24 (D) WL/32

Description : A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be (A) WL (B) WL/8 (C) WL/24 (D) WL/32

Last Answer : (D) WL/32

The ratio of the maximum deflections of a beam simply supported at its ends with an isolated central load and that of with a uniformly distributed load over its entire length, is (A) 3/2 (B) 15/24 (C) 24/15 (D) 2/3

Description : The ratio of the maximum deflections of a beam simply supported at its ends with an isolated central load and that of with a uniformly distributed load over its entire length, is (A) 3/2 (B) 15/24 (C) 24/15 (D) 2/3

Last Answer : (C) 24/15

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Description : Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Last Answer : (4) outer surface of the body Explanation: In all conductors, charges reside on the surface. The reason for this is that conductors have free electrons, that is, the electrons are loosely ... field just, outside the conductor is perpendicular to the surface and that the field inside is zero.

A hollow METALLIC sphere has an inner radius A and an outer radius B. If charge is placed on the inner surface, that is at radius A, where is the charge located after it has come to rest?

Description : A hollow METALLIC sphere has an inner radius A and an outer radius B. If charge is placed on the inner surface, that is at radius A, where is the charge located after it has come to rest?  

Last Answer : ANSWER: ON THE SPHERE'S OUTER SURFACE or OUTSIDE RADIUS B 

Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Description : Where do the electrical charges reside in a charged conductor? (1) at the core (2) throughout the body (3) depended upon the nature of the body (4) outer surface of the body

Last Answer : outer surface of the body

What term refers to the process in cells differentiate into layers with each layer ultimately forming distinct parts of the fetus?

Description : What term refers to the process in cells differentiate into layers with each layer ultimately forming distinct parts of the fetus?

Last Answer : Gastrulation

o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Description : o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Last Answer : b) 2.0cm/m

Iron filings can be separated from a heterogenous mixture using the technique of (1) Sublimation (2) Magnetization (3) Sedimentation (4) Evaporation

Description : Iron filings can be separated from a heterogenous mixture using the technique of (1) Sublimation (2) Magnetization (3) Sedimentation (4) Evaporation

Last Answer : (2) Magnetization Explanation: The method of separation using magnets is used when one of the components is magnetic. So the heterogeneous mixture of iron filings and some other material (such as sulphur ... by using magnets. Similarly, a mixture of sand and iron filings can be separated by magnet.

Materials that retain a large part of their magnetization, after the magnetizing force is removed, are said to have _____________. A. low hysteresis loss B. high flux density C. high permanence D. high permeability

Description : Materials that retain a large part of their magnetization, after the magnetizing force is removed, are said to have _____________. A. low hysteresis loss B. high flux density C. high permanence D. high permeability

Last Answer : Answer: C

What are the methods of magnetization?

Description : What are the methods of magnetization? 

Last Answer : a. Tough method b. By means of electric current c. Induction method 

The charge build up in a capacitor is due to a) Conduction current density b) Displacement current density c) Polarisation d) Magnetization

Description : The charge build up in a capacitor is due to a) Conduction current density b) Displacement current density c) Polarisation d) Magnetization

Last Answer : b) Displacement current density

The reason for non existence of magnetic monopoles is a) The magnetic field cannot be split b) Due to permeability c) Due to magnetization d) Due to magnetostriction

Description : The reason for non existence of magnetic monopoles is a) The magnetic field cannot be split b) Due to permeability c) Due to magnetization d) Due to magnetostriction

Last Answer : a) The magnetic field cannot be split

A boundary of separation between two magnetic materials is identified by which factor? a) Change in the permeability b) Change in permittivity c) Change in magnetization d) Conduction

Description : A boundary of separation between two magnetic materials is identified by which factor? a) Change in the permeability b) Change in permittivity c) Change in magnetization d) Conduction

Last Answer : a) Change in the permeability

Find the magnetic moment of a material with magnetization 5 units in a volume of 35 units. a) 7 b) 1/7 c) 15 d) 175

Description : Find the magnetic moment of a material with magnetization 5 units in a volume of 35 units. a) 7 b) 1/7 c) 15 d) 175

Last Answer : d) 175

Find the magnetization of the material with susceptibility of 6 units and magnetic field intensity of 13 units. a) 2.16 b) 6.2 c) 78 d) 1.3

Description : Find the magnetization of the material with susceptibility of 6 units and magnetic field intensity of 13 units. a) 2.16 b) 6.2 c) 78 d) 1.3

Last Answer : c) 78

Find the correct relation between current density and magnetization. a) J = Grad(M) b) J = Div(M) c) J = Curl(M) d) M = Curl(J)

Description : Find the correct relation between current density and magnetization. a) J = Grad(M) b) J = Div(M) c) J = Curl(M) d) M = Curl(J)

Last Answer : c) J = Curl(M)

Calculate the magnetization of a material with susceptibility of 50 and field intensity of 0.25 units. a) 12.5 b) 25 c) 75

Description : Calculate the magnetization of a material with susceptibility of 50 and field intensity of 0.25 units. a) 12.5 b) 25 c) 75 d) 37.5

Last Answer : a) 12.5

The expression for magnetization is given by(I-current, A-area, V-volume) a) M = IAV b) M = IA/V c) M = V/IA d) M = 1/IAV

Description : The expression for magnetization is given by(I-current, A-area, V-volume) a) M = IAV b) M = IA/V c) M = V/IA d) M = 1/IAV

Last Answer : b) M = IA/V

The converse of magnetostriction is called the a) Magnetization b) Magnetic anisotropy c) Villari effect d) Curie effect

Description : The converse of magnetostriction is called the a) Magnetization b) Magnetic anisotropy c) Villari effect d) Curie effect

Last Answer : c) Villari effect

Piezoelectric effect is analogous to which phenomenon? a) Electrostriction b) Magnetostriction c) Anisotropy d) Magnetization

Description : Piezoelectric effect is analogous to which phenomenon? a) Electrostriction b) Magnetostriction c) Anisotropy d) Magnetization

Last Answer : b) Magnetostriction

Find the internal field when the applied field is 12 units, molecular field constant is 0.1 units and the magnetization is 74 units. a) 86 b) 62 c) 752 d) 19.4

Description : Find the internal field when the applied field is 12 units, molecular field constant is 0.1 units and the magnetization is 74 units. a) 86 b) 62 c) 752 d) 19.4

Last Answer : d) 19.4

Find the magnetization of the field which has a magnetic moment 16 units in a volume of 1.2 units. a) 16.67 b) 13.33 c) 15.56 d) 18.87

Description : Find the magnetization of the field which has a magnetic moment 16 units in a volume of 1.2 units. a) 16.67 b) 13.33 c) 15.56 d) 18.87

Last Answer : b) 13.33

The magnetization is defined by the ratio of a) Magnetic moment to area b) Magnetic moment to volume c) Magnetic flux density to area d) Magnetic flux density to volume

Description : The magnetization is defined by the ratio of a) Magnetic moment to area b) Magnetic moment to volume c) Magnetic flux density to area d) Magnetic flux density to volume

Last Answer : b) Magnetic moment to volume

The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Description : The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Last Answer : c) Magnetic field stored by the material

When a dielectric loses its dielectric property, the phenomenon is called a) Dielectric loss b) Dielectric breakdown c) Polarisation d) Magnetization

Description : When a dielectric loses its dielectric property, the phenomenon is called a) Dielectric loss b) Dielectric breakdown c) Polarisation d) Magnetization

Last Answer : b) Dielectric breakdown