Energy in reflected light : (1) does not depends on the angle of incidence (2) increases with the increase in angle (3) decreases with the increase in angle of incidence (4) becomes maximum for angle of incidence equal to 45°

Energy in reflected light : (1) does not depends on the angle of incidence (2) increases with the increase in angle (3) decreases with the increase in angle of incidence (4) becomes maximum for angle of incidence equal to 45°
by

1 Answer

Answer :

(2) increases with the increase in angle Explanation: Reflected waves are simply those waves that are neither transmitted nor absorbed, but are reflected from the surface of the medium they encounter. The amount of incident-wave energy that is reflected from a surface depends on the nature of the surface and the angle at which the wave strikes the surface.
by
selected

Related questions

Energy in reflected light : (1) does not depends on the angle of incidence (2) increases with the increase in angle (3) decreases with the increase in angle of incidence (4) becomes maximum for angle of incidence equal to 45°

Description : Energy in reflected light : (1) does not depends on the angle of incidence (2) increases with the increase in angle (3) decreases with the increase in angle of incidence (4) becomes maximum for angle of incidence equal to 45°

Last Answer : (2) increases with the increase in angle Explanation: Reflected waves are simply those waves that are neither transmitted nor absorbed, but are reflected from the surface of the medium they encounter. The ... depends on the nature of the surface and the angle at which the wave strikes the surface.

Energy in reflected light : (1) does not depends on the angle of incidence (2) increases with the increase in angle (3) decreases with the increase in angle of incidence (4) becomes maximum for angle of incidence equal to 45°

Description : Energy in reflected light : (1) does not depends on the angle of incidence (2) increases with the increase in angle (3) decreases with the increase in angle of incidence (4) becomes maximum for angle of incidence equal to 45° 

Last Answer : increases with the increase in angle

When light is reflected from a surface, the angle of incidence is: w) 30 degrees x) equal to the angle of reflection y) 90 degrees z) 180 degrees

Description : When light is reflected from a surface, the angle of incidence is: w) 30 degrees x) equal to the angle of reflection y) 90 degrees z) 180 degrees

Last Answer : ANSWER: X -- EQUAL TO THE ANGLE OF REFLECTION

On a rainy day, small oil films on water show brilliant colors'. This is due to A. dispersion B. interference C. diffraction D. Polarization 49.The critical angle for a beam of light passing from water into air is 48.8 °. This means that all light rays with an angle of incidence greater than this angle will be A. absorbed B. totally reflected C. Partially reflected and partially transmitted D. Totally transmitted

Description : On a rainy day, small oil films on water show brilliant colors'. This is due to A. dispersion B. interference C. diffraction D. Polarization 49.The critical angle for a beam of light ... A. absorbed B. totally reflected C. Partially reflected and partially transmitted D. Totally transmitted

Last Answer : C. Partially reflected and partially transmitted

Assume a ray of light is incident on a smooth reflecting surface at an angle of incidence of 15 degrees to the normal. What is the angle between the incident ray and the reflected ray?

Description : Assume a ray of light is incident on a smooth reflecting surface at an angle of incidence of 15 degrees to the normal. What is the angle between the incident ray and the reflected ray?

Last Answer : ANSWER: 30 DEGREES

The Snell’s law can be derived from which type of incidence? a) Incidence angle b) Reflected angle c) Refracted angle d) Oblique incidence

Description : The Snell’s law can be derived from which type of incidence? a) Incidence angle b) Reflected angle c) Refracted angle d) Oblique incidence

Last Answer : d) Oblique incidence

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases monotonically with increase in speed. (c) is maximum at zero speed and decreases monotonically with increase in speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Description : In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases ... speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Last Answer : (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Last Answer : (B) 45°

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Last Answer : A. Acceptance cone half-angle

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

Light enters air from water. The angle of refraction will be A. Greater than the angle of incidence. B. Equal to the angle of incidence. C. Less than the angle of incidence. D. None of these

Description : Light enters air from water. The angle of refraction will be A. Greater than the angle of incidence. B. Equal to the angle of incidence. C. Less than the angle of incidence. D. None of these

Last Answer : C. Less than the angle of incidence.

Optical fiber uses reflection to guide light through a channel, in which angle of incidence is ................. the critical angle. (A) equal to (B) less than (C) greater than (D) less than or equal to

Description : Optical fiber uses reflection to guide light through a channel, in which angle of incidence is ................. the critical angle. (A) equal to (B) less than (C) greater than (D) less than or equal to

Last Answer : (C) greater than

During the formation of a chemical bond - (1) energy decreases (2) energy increases (3) energy of the system does not change (4) electron-electron repulsion becomes more than the nucleus-electron attraction

Description : During the formation of a chemical bond - (1) energy decreases (2) energy increases (3) energy of the system does not change (4) electron-electron repulsion becomes more than the nucleus-electron attraction

Last Answer : (1) energy decreases

During the formation of bond..... a) Energy decreases b) Energy increases c) Energy of system does not change d) Electron-electron repulsion becomes more than Nucleus-electron attraction

Description : During the formation of bond..... a) Energy decreases b) Energy increases c) Energy of system does not change d) Electron-electron repulsion becomes more than Nucleus-electron attraction

Last Answer : a) Energy decreases

In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused by slit at a single point on screen B. All the diffracted rays are perpendicular and focused by slit at a single point on screen C. The rays are diffracted by the slit in all the directions D. The rays are reflected by the slit

Description : In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused ... are diffracted by the slit in all the directions D. The rays are reflected by the slit

Last Answer : A. All the diffracted rays are parallel and focused by slit at a single point on screen

With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

With increase in temperature, the thermal conductivity of most liquids (A) Increases (B) Decreases (C) Remain same (D) First increases upto a certain temperature and then becomes constant

Description : With increase in temperature, the thermal conductivity of most liquids (A) Increases (B) Decreases (C) Remain same (D) First increases upto a certain temperature and then becomes constant

Last Answer : (C) Remain same

The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Last Answer : (2) 45° with horizontal Explanation: This has to do with the equation of a parabola or trajectory which is z = (tane)x 2 cos 9) 2. We can see that if the ball is fired at a 45 degree angle from the ground, the horizontal distance will be a maximum.

Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°

Description : Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°

Last Answer : 45°

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Last Answer : Answer: Option D

The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Last Answer : 45° with horizontal 

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance

Description : The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance

Last Answer : Answer: Option D

Which of the following statement(s) is/are true concerning the results of a National Institute of Health Consensus Conference on venous thrombosis and low-dose heparin prophylaxis? a. The odds of developing deep venous thrombosis with low-dose heparin prophylaxis decreases by 67% b. The risk of pulmonary embolism is decreased by almost 50% c. There is no increase in mortality from other causes found in patients treated with low-dose heparin d. There was no difference in the incidence of bleeding complications

Description : Which of the following statement(s) is/are true concerning the results of a National Institute of Health Consensus Conference on venous thrombosis and low-dose heparin prophylaxis? a. The odds of ... treated with low-dose heparin d. There was no difference in the incidence of bleeding complications

Last Answer : Answer: a, b, c In a metaanalysis of 70 randomized trials in 16,000 patients comparing low-dose heparin prophylaxis with standard therapy, the odds of developing deep venous thrombosis ... Similarly, the effectiveness of prophylaxis was not influenced by either two or three times daily dosage

Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Description : Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Last Answer : (A) Increases

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Description : In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Last Answer : (B) Decreases

With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Last Answer : (B) Decreases

With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Description : With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Last Answer : (B) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Description : For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Last Answer : (A) Increases

In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Description : In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Last Answer : (A) Increases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Last Answer : (B) Decreases

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Last Answer : (B) Decreases

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Description : With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Last Answer : (B) Decreases

With increase in C/H ratio of a fuel, the amount of CO2 formed on its complete combustion (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on other factors

Description : With increase in C/H ratio of a fuel, the amount of CO2 formed on its complete combustion (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on other factors

Last Answer : (A) Increases

With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Description : With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases