Two planets have the same density of matter, such that their masses are proportional to the cube of their radii. The ratio of their acceleration due to gravity on their surfaces is (a) r2/r1 (b) (r1/r2)2 (c) r1/r2 (d) (r2/r1)2

Two planets have the same density of matter, such that their masses are proportional to the cube of their radii. The ratio of their acceleration due to gravity on their surfaces is (a) r2/r1 (b) (r1/r2)2 (c) r1/r2 (d) (r2/r1)2
by

1 Answer

Answer :

Ans:(d) Direction: In the following question, a statement of Assertion (A) is given followed by corresponding Reason (R), just below it. Read the statements carefully and mark the correct answer: (a) If both A and R are true and R is the correct explanation of A. (b) If both A and R are true but R is not the correct explanation of A. (c) If A is true but R is false  
by
selected

Related questions

Critical Speed (Nc ) of a ball mill is given by (where R1 and R2 are radii of ball mill and the ball respectively). (A) Nc = (1/4π). √(g/R1 - R2 ) (B) Nc = (1/2π). √(g/R1 - R2 ) (C) Nc = (1/π). √(g/R1 - R2 ) (D) Nc = (1/2π). √(R1 - R2 /g)

Description : Critical Speed (Nc ) of a ball mill is given by (where R1 and R2 are radii of ball mill and the ball respectively). (A) Nc = (1/4π). √(g/R1 - R2 ) (B) Nc = (1/2π). √(g/R1 - R2 ) (C) Nc = (1/π). √(g/R1 - R2 ) (D) Nc = (1/2π). √(R1 - R2 /g)

Last Answer : (B) Nc = (1/2π). √(g/R1 - R2 )

Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth B. inversely proportional to the distance from the center of the Earth C. directly proportional to the square of the distance from the center of the Earth D. directly proportional to the distance from the center of the Earth

Description : Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth ... center of the Earth D. directly proportional to the distance from the center of the Earth

Last Answer : directly proportional to the distance from the center of the Earth

Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to (A) (r2- r1)/r1. r2 (B) r1. r2/(r2- r1) (C) (r2 + r1)/r1. r2 (D) r1. r2/(r2 + r1)

Description : Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to (A) (r2- r1)/r1. r2 (B) r1. r2/(r2- r1) (C) (r2 + r1)/r1. r2 (D) r1. r2/(r2 + r1)

Last Answer : (B) r1. r2/(r2- r1)

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

Kepler's 3rd law states that... A. the periods of revolution of the planets are proportional to the cube of their mean distances from sun B. the periods of revolution of the planets are inversely proportional to the cube of their mean distances from sun C. the squares of the periods of revolution of the planets are proportional to the cube of their mean distance from sun D. the squares of the periods of revolution of the planets are inversely proportional to the cube of their mean distance from sun

Description : Kepler's 3rd law states that... A. the periods of revolution of the planets are proportional to the cube of their mean distances from sun B. the periods of revolution of the planets ... periods of revolution of the planets are inversely proportional to the cube of their mean distance from sun

Last Answer : the squares of the periods of revolution of the planets are proportional to the cube of their mean distance from sun

According to Avogadro’s law, the density of any two gases is __________ their molecular masses, if the gases are at the same temperature and pressure.  A. equal to  B. directly proportional to  C. inversely proportional to

Description : According to Avogadro’s law, the density of any two gases is __________ their molecular masses, if the gases are at the same temperature and pressure.  A. equal to  B. directly proportional to  C. inversely proportional to

Last Answer : Answer: B

In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Last Answer : 60 millivolts.

In a circuit such as that shown in figure 3-15, if R1 has a value of 100 ohms and R2 has a value of 1 kilohm and the input signal is at a value of + 5 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-15, if R1 has a value of 100 ohms and R2 has a value of 1 kilohm and the input signal is at a value of + 5 millivolts, what is the value of the output signal?

Last Answer : 50 millivolts.

An artificial satellite stays in the orbit around the Earth because (a) The Earth’s gravity does not act on the satellite due to the great distance between them (b) The Earth’s attraction produces the necessary centripetal acceleration (c) The Earth’s attraction is balanced by the attraction of other planets (d) There is an engine in the satellite that constantly applies an upward force to balance its weight

Description : An artificial satellite stays in the orbit around the Earth because (a) The Earth's gravity does not act on the satellite due to the great distance between them (b) The Earth's attraction ... (d) There is an engine in the satellite that constantly applies an upward force to balance its weight

Last Answer : Ans:(b)

Rain drops (assumed to be spherical) of radii R1, 2R1, 3R, 4R, a.all of them will be zero b.all of them will be same c.drops of radius R will be maximum d.drops of radius R will be minimum e.107 dynes

Description : Rain drops (assumed to be spherical) of radii R1, 2R1, 3R, 4R, a.all of them will be zero b.all of them will be same c.drops of radius R will be maximum d.drops of radius R will be minimum e.107 dynes

Last Answer : d. drops of radius R will be minimum

Natural frequency of simple pendulum is proportional to A. Length B. Acceleration due to gravity C. Both D. None

Description : Natural frequency of simple pendulum is proportional to A. Length B. Acceleration due to gravity C. Both D. None

Last Answer : B. Acceleration due to gravity

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

For the same draw down in two observations wells at distances r1 and r2, the times after start of pumping are t1 and t2 hours respectively. The relation which holds good is (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3 × t1 (D) t2 = (r2/r1) × t1 2

Description : For the same draw down in two observations wells at distances r1 and r2, the times after start of  pumping are t1 and t2 hours respectively. The relation which holds good is  (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3  × t1 (D) t2 = (r2/r1) × t1 2

Last Answer : (B) t2 = (r2/r1)² × t1

As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow through 'R1' will equal the current flow through 'R2' C. the energy dissipated in 'R1' will be the same as the energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Description : As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow ... energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Last Answer : Answer: D

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: C

Heavy metals got their name because compared to other atoms they have - (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Description : Heavy metals got their name because compared to other atoms they have - (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Last Answer : (2) Higher atomic masses Explanation: Arsenic, beryllium, cadmium, chromium, lead, manganese, mercury, nickel, and selenium are some of the metals called 'heavy' because of their high relative atomic ... and can cause damage or death in animals, humans, and plants even at very low concentrations.

Heavy metals got their name because compared to other atoms they have (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Description : Heavy metals got their name because compared to other atoms they have (1) Higher densities (2) Higher atomic masses (3) Higher atomic numbers (4) Higher atomic radii

Last Answer : Higher atomic masses

Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any attributes of their own. How many minimum number of tables are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Description : Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any ... are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Last Answer : (B) 3 

The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number

Description : The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number

Last Answer : (B) Ratio of absolute viscosity to density

A hydrogen filled balloon rises in air because (a) The atmospheric pressure decreases with altitude (b) The acceleration due to gravity decreases with altitude (c) The density of air decreases with altitude (d) The buoyant force exerted by the air on the balloon is greater than the weight of the balloon

Description : A hydrogen filled balloon rises in air because (a) The atmospheric pressure decreases with altitude (b) The acceleration due to gravity decreases with altitude (c) The density of air decreases with ... The buoyant force exerted by the air on the balloon is greater than the weight of the balloon

Last Answer : Ans:(d)

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity. Static fluid pressure does not depend on the shape, total mass, or surface area of the liquid.

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity.

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : Surface area of the bottom of the vessel

A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Description : A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Last Answer : (a) 330 volts. (b) E1 = 150 volts. E2 = 180 volts. (c) 1.98 kilowatts. (d) P1 = 900 watts. P2 = 1.08 kilowatts component but in a parallel circuit total current divides among the available paths.

Let pk(R) denotes primary key of relation R. A many-to-one relationship that exists between two relations R1 and R2 can be expressed as follows: (1) pk(R2)→pk(R1) (2) pk(R1)→pk(R2) (3) pk(R2)→R1∩R2 (4) pk(R1)→R1∩R2

Description : Let pk(R) denotes primary key of relation R. A many-to-one relationship that exists between two relations R1 and R2 can be expressed as follows: (1) pk(R2)→pk(R1) (2) pk(R1)→pk(R2) (3) pk(R2)→R1∩R2 (4) pk(R1)→R1∩R2

Last Answer : Answer: 2

Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following statement is true? (1) Both S1 and S2 are conflict serializable. (2) S1 is conflict serializable and S2 is not conflict serializable. (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Description : Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following ... . (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Last Answer : S1 is not conflict serializable and S2 is conflict serializable.

Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to represent M, N, R1 and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Description : Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to ... and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Last Answer : Answer: 4

Two resistances R1 and R2 give combined resistance of 4.5 ohms when...

Description : Two resistances R1 and R2 give combined resistance of 4.5 ohms when in series and 1 ohm when in parallel. The resistances are

Last Answer : Two resistances R1 and R2 give combined resistance of 4.5 ohms when in series and 1 ohm when in parallel. The resistances are 1.5 ohms and 3 ohms.

Let R1 and R2 be the remainders when the polynomials x^3 + 2x^2 – 5ax – 7 and x^2 + ax^2 – 12x + 6 are divided by (x + 1) and (x – 2) respectively. -Maths 9th

Description : Let R1 and R2 be the remainders when the polynomials x^3 + 2x^2 – 5ax – 7 and x^2 + ax^2 – 12x + 6 are divided by (x + 1) and (x – 2) respectively. -Maths 9th

Last Answer : answer:

What is the Voltage drop of R1 If V 10 Volts R1 500 Ohms and R2 1500 Ohms?

Description : What is the Voltage drop of R1 If V 10 Volts R1 500 Ohms and R2 1500 Ohms?

Last Answer : You need to mention whether the resistors are in series or parallel to get the right answer

What is the total current is V is 10 Volts R1 is 500 Ohms and R2 is 1500 ohms?

Description : What is the total current is V is 10 Volts R1 is 500 Ohms and R2 is 1500 ohms?

Last Answer : We need to find R equivalent at first then divide V from it to find the total current.Case 1: If resistances are connected in series.Then, R(eq.) = R1 + R2 = 500 + 1500 = 2000 ohmSo, Total current, I = V/R(eq.) = ... (500 + 1500) = 400 ohmSo, Total current, I = V/R(eq.) = 10/400 = 1/40 or 0.025 A.

What is the total resistance is V is 10 volts R1 is 1000 ohms and R2 is 1000 Ohms?

Description : What is the total resistance is V is 10 volts R1 is 1000 ohms and R2 is 1000 Ohms?

Last Answer : If they're connected in series the total resistance is 2000 ohms. If they're connected in parallel the resistance is 500 ohms.

weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Description : weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Last Answer : ANS: A

What is the total current of the illustrated circuit if the battery is 12 VDC and the resistance of R1 is 2 ohms, R2 is 3 ohms and R3 is 6 ohms? EL-0021 A. 2 amps B. 4 amps C. 6 amps D. 12 amps

Description : What is the total current of the illustrated circuit if the battery is 12 VDC and the resistance of R1 is 2 ohms, R2 is 3 ohms and R3 is 6 ohms? EL-0021 A. 2 amps B. 4 amps C. 6 amps D. 12 amps

Last Answer : Answer: D

In the illustrated circut, if the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms. What is the total resistance? EL-0032 A. 15 ohms B. 20 ohms C. 25 ohms D. 30 ohms

Description : In the illustrated circut, if the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms. What is the total resistance? EL-0032 A. 15 ohms B. 20 ohms C. 25 ohms D. 30 ohms

Last Answer : Answer: A

The electrical diagram shown in the illustration shows _____________. EL-0021 A. 'R1', 'R2', and 'R3' are connected is series B. 'R1', 'R2', and 'R3' are connected in parallel C. the voltages measured across 'R1', 'R2' and 'R3' will be different if 'R1', 'R2' and 'R3' have different values D. the total resistance equals R1 + R2 + R3

Description : The electrical diagram shown in the illustration shows _____________. EL-0021 A. 'R1', 'R2', and 'R3' are connected is series B. 'R1', 'R2', and 'R3' are connected in parallel C. the voltages measured across ... if 'R1', 'R2' and 'R3' have different values D. the total resistance equals R1 + R2 + R3

Last Answer : Answer: B

Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Description : Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Last Answer : Answer: A

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter by design, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter by design, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz supply ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: B

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 24 kohms, and R2 is 3610 ohms what is the current flowing through R1? EL-0036 A. .434 milliamps B. .005 amp C. 6.00 amps D. 2.4 milliamps

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 24 kohms, and R2 is 3610 ohms what is the current flowing through R1? EL-0036 A. .434 milliamps B. .005 amp C. 6.00 amps D. 2.4 milliamps

Last Answer : Answer: A

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the total power consumed by R1? EL-0036 A. 3.6 watts B. 72 watts C. 7.2 watts D. 36 watts

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the total power consumed by R1? EL-0036 A. 3.6 watts B. 72 watts C. 7.2 watts D. 36 watts

Last Answer : Answer: A

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the total power consumed by the circuit? EL-0036 A. 3.6 watts B. 72 watts C. 7.2 watts D. 36 watts

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the total power consumed by the circuit? EL-0036 A. 3.6 watts B. 72 watts C. 7.2 watts D. 36 watts

Last Answer : Answer: C

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the current flowing through R1? EL-0036 A. 0.6 amp B. 0.833 amp C. 1.2 amps D. 2.4 amps

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the current flowing through R1? EL-0036 A. 0.6 amp B. 0.833 amp C. 1.2 amps D. 2.4 amps

Last Answer : Answer: A

In the illustration, 24 volts is applied to the circut where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R3? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts

Description : In the illustration, 24 volts is applied to the circut where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R3? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts

Last Answer : Answer: B

In the illustration, 24 volts is applied to the circuit where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R2? EL-0020 A. 16 watts B. 20 watts C. 24 watts D. 28 watts

Description : In the illustration, 24 volts is applied to the circuit where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R2? EL-0020 A. 16 watts B. 20 watts C. 24 watts D. 28 watts

Last Answer : Answer: A

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the total current in the circuit? EL-0036 A. 0.6 amp B. 0.833 amp C. 1.2 amps D. 2.4 amps

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 10 ohms, and R2 is 10 ohms what is the total current in the circuit? EL-0036 A. 0.6 amp B. 0.833 amp C. 1.2 amps D. 2.4 amps

Last Answer : Answer: A

In the illustration, 12 volts is applied to the circuit where the resistance of R1 is 10 ohms and R2 is 10 ohms. what is the voltage across R2? EL-0036 A. 1.2 volts B. 2 volts C. 6 volts D. 12 volts

Description : In the illustration, 12 volts is applied to the circuit where the resistance of R1 is 10 ohms and R2 is 10 ohms. what is the voltage across R2? EL-0036 A. 1.2 volts B. 2 volts C. 6 volts D. 12 volts

Last Answer : Answer: C

In the illustration, 24 volts is applied to the circuit where the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R1? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts

Description : In the illustration, 24 volts is applied to the circuit where the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R1? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts

Last Answer : Answer: D

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 110 ohms, and R2 is 10 kohms what is the total power consumed by the circuit? EL-0036 A. 3.6 watts B. 72 watts C. .0011286 watts D. .014243 watts

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 110 ohms, and R2 is 10 kohms what is the total power consumed by the circuit? EL-0036 A. 3.6 watts B. 72 watts C. .0011286 watts D. .014243 watts

Last Answer : Answer: D