Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Pick up the incorrect statement from the following. The super-elevation on roads is
(A) Directly proportional to width of pavement
(B) Directly proportional to velocity of vehicles
(C) Inversely proportional to acceleration due to gravity
(D) Inversely proportional to the radius of curvature
by

1 Answer

Answer :

Answer: Option B
by

Related questions

If V is speed of a moving vehicle, r is radius of the curve, g is the acceleration due to gravity, W is the width of the carriageway, the super elevation is (A) WV/gr (B) W²V/gr (C) WV²/gr (D) WV/gr²

Description : If V is speed of a moving vehicle, r is radius of the curve, g is the acceleration due to gravity, W is the width of the carriageway, the super elevation is (A) WV/gr (B) W²V/gr (C) WV²/gr (D) WV/gr²

Last Answer : Answer: Option C

In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Description : In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Last Answer : Answer: Option C

If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Description : If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Last Answer : (D) GV²/gR

Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth B. inversely proportional to the distance from the center of the Earth C. directly proportional to the square of the distance from the center of the Earth D. directly proportional to the distance from the center of the Earth

Description : Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth ... center of the Earth D. directly proportional to the distance from the center of the Earth

Last Answer : directly proportional to the distance from the center of the Earth

The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Description : The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Last Answer : Answer: Option D

An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Description : The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Last Answer : (C) Inversely proportional to the cube of its depth

The total pressure on the top of a closed cylindrical vessel completely filled up with a liquid is (A) Directly proportional to (radius)2 (B) Inversely proportional to (radius)2 (C) Directly proportional to (radius)4 (D) Inversely proportional to (radius)

Description : The total pressure on the top of a closed cylindrical vessel completely filled up with a liquid is (A) Directly proportional to (radius)2 (B) Inversely proportional to (radius)2 (C) Directly proportional to (radius)4 (D) Inversely proportional to (radius)

Last Answer : Answer: Option C

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Description : The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Last Answer : (D) None of these

The Reynold's number of a ship is __________ to its velocity and length. (A) Directly proportional (B) Inversely proportional (C) Square root of velocity (D) None of these

Description : The Reynold's number of a ship is __________ to its velocity and length. (A) Directly proportional (B) Inversely proportional (C) Square root of velocity (D) None of these

Last Answer : Answer: Option A

The tangential velocity of the water element having a free vortex is (A) Directly proportional to its distance from the centre (B) Inversely proportional to its distance from the centre (C) Directly proportional to its (distance)2 from the centre (D) Inversely proportional to its (distance)2 from the centre

Description : The tangential velocity of the water element having a free vortex is (A) Directly proportional to its distance from the centre (B) Inversely proportional to its distance from the centre (C) Directly ... (distance)2 from the centre (D) Inversely proportional to its (distance)2 from the centre

Last Answer : Answer: Option B

Acceleration is – (1) Inversely proportional to force (2) Inversely proportional to mass (3) Directly proportional to mass (4) Directly proportional to force

Description : Acceleration is – (1) Inversely proportional to force (2) Inversely proportional to mass (3) Directly proportional to mass (4) Directly proportional to force

Last Answer : (1) Inversely proportional to force Explanation: Acceleration, in physics, is the rate of change of velocity of an object with respect to time. An object's acceleration is the net result of ... second law of motion states that acceleration is directly proportional to net force when mass is constant.

The acceleration of a particular body is directly proportional to the resultant force acting on it & inversely proportional to its mass.  a. Pascal's Law  b. Joule's Law  c. Newton's Law  d. None of the above

Description : The acceleration of a particular body is directly proportional to the resultant force acting on it & inversely proportional to its mass.  a. Pascal's Law  b. Joule's Law  c. Newton's Law  d. None of the above

Last Answer : Newton's Law

Acceleration is (1) Inversely proportional to force (2) Inversely proportional to mass (3) Directly proportional to mass (4) Directly proportional to force

Description : Acceleration is (1) Inversely proportional to force (2) Inversely proportional to mass (3) Directly proportional to mass (4) Directly proportional to force

Last Answer : Inversely proportional to force

Pick up the incorrect statement from the following: (A) Free surface ground water is subjected to atmospheric pressure (B) Water table surface rises and falls with seasons (C) Depth of water table is directly proportional to the rate of drawl of water (D) Level of water table remains stationary

Description : Pick up the incorrect statement from the following:  (A) Free surface ground water is subjected to atmospheric pressure  (B) Water table surface rises and falls with seasons  (C) ... directly proportional to the rate of drawl of water  (D) Level of water table remains stationary 

Last Answer : (D) Level of water table remains stationary 

Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly proportional to (A) Modulus of rigidity (B) Angle of twist (C) Reciprocal of the length of the shaft (D) Moment of inertia of the shaft section

Description : Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly  proportional to  (A) Modulus of rigidity  (B) Angle of twist  (C) Reciprocal of the length of the shaft  (D) Moment of inertia of the shaft section 

Last Answer : (D) Moment of inertia of the shaft section 

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these

Description : The convexity provided to the carriageway between the crown and edge of the pavement, is known as (A) Super-elevation (B) Camber (C) Height of the pavement (D) None of these

Last Answer : Answer: Option B

A district road with a bituminous pavement has a horizontal curve of 1000 m for a design speed of 75 km ph. The super-elevation is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70

Description : A district road with a bituminous pavement has a horizontal curve of 1000 m for a design speed of 75 km ph. The super-elevation is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70

Last Answer : Answer: Option A

The Radius (or diameter) of bright rings in Newton’s rings is (a) Directly proportional to the square root of odd numbers (b) Inversely proportional to the square root of natural numbers (c) Directly proportional to the square root of even numbers (d) Directly proportional to the square root of natural numbers

Description : he Radius (or diameter) of bright rings in Newton's rings is (a) Directly proportional to the square root of odd numbers (b) Inversely proportional to the square root of natural numbers (c) ... to the square root of even numbers (d) Directly proportional to the square root of natural numbers

Last Answer : (a) Directly proportional to the square root of odd numbers

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

The strain energy due to volumetric strain (A) Is directly proportional to the volume (B) Is directly proportional to the square of exerted pressure (C) Is inversely proportional to Bulk modulus (D) All the above

Description : The strain energy due to volumetric strain  (A) Is directly proportional to the volume  (B) Is directly proportional to the square of exerted pressure  (C) Is inversely proportional to Bulk modulus  (D) All the above 

Last Answer : (D) All the above 

Stress in a beam due to simple bending, is (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Description : Stress in a beam due to simple bending, is  (A) Directly proportional  (B) Inversely proportional  (C) Curvilinearly related  (D) None of these 

Last Answer : (A) Directly proportional 

The pressure of fluid due to hammer blow is (A) Directly proportional to density of fluid (B) Inversely proportional to density of fluid (C) Directly proportional to (density)1/2 of fluid (D) Inversely proportional to (density)1/2 of fluid

Description : The pressure of fluid due to hammer blow is (A) Directly proportional to density of fluid (B) Inversely proportional to density of fluid (C) Directly proportional to (density)1/2 of fluid (D) Inversely proportional to (density)1/2 of fluid

Last Answer : Answer: Option C

Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the transition curve with main curve (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (C) Gradual change of gradient from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (D) None of these

Description : Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the ... specified amount at the junction of the transition curve with main curve (D) None of these

Last Answer : (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve

The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to the square of angular velocity d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Description : The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to ... d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Last Answer : e. Inversely proportional to the angular velocity

If the substrate concentration is much below the km of the enzyme, the velocity of the reaction is (A) Directly proportional to substrate concentration (B) Not affected by enzyme concentration (C) Nearly equal to Vmax (D) Inversely proportional to substrate concentration

Description : If the substrate concentration is much below the km of the enzyme, the velocity of the reaction is (A) Directly proportional to substrate concentration (B) Not affected by enzyme concentration (C) Nearly equal to Vmax (D) Inversely proportional to substrate concentration

Last Answer : Answer : A

The velocity of sound is ….. the density of the medium. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square root of (d) Inversely proportional to the square root of

Description : The velocity of sound is ….. the density of the medium. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square root of (d) Inversely proportional to the square root of

Last Answer : Ans:(d)

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Description : The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Last Answer : (B) Directly proportional to square of

A fluid is termed as the Newtonian fluid, when the shear stress is __________ the velocity gradient. (A) Independent of (B) Inversely proportional to (C) Directly proportional to (D) None of these

Description : A fluid is termed as the Newtonian fluid, when the shear stress is __________ the velocity gradient. (A) Independent of (B) Inversely proportional to (C) Directly proportional to (D) None of these

Last Answer : (C) Directly proportional to

The correct formula for calculating super-elevation for the hill roads, is (A) e = V²/254 R (B) e = V²/225 R (C) e = V²/278 R (D) e = V²/114 R

Description : The correct formula for calculating super-elevation for the hill roads, is (A) e = V²/254 R (B) e = V²/225 R (C) e = V²/278 R (D) e = V²/114 R

Last Answer : Answer: Option B

Maximum super-elevation on hill roads should not exceed (A) 5 % (B) 7 % (C) 8 % (D) 10 %

Description : Maximum super-elevation on hill roads should not exceed (A) 5 % (B) 7 % (C) 8 % (D) 10 %

Last Answer : Answer: Option D

Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Description : Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Last Answer : Answer: Option C

Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Description : Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Last Answer : Answer: Option D

The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Description : The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Last Answer : Answer: Option C

Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more

Description : Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more

Last Answer : (A) Inversely proportional to the scale of the map

Hooke's law states that stress and strain are (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Description : Hooke's law states that stress and strain are (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Last Answer : (A) Directly proportional

In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Description : In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Last Answer : (B) Inversely proportional to the distance from the axis

Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Description : Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Last Answer : (B) Directly proportional to permeability of soil

The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Description : The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Last Answer : (B) Directly proportional to the compression index

Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C) Directly proportional to drainage path and inversely proportional to time (D) Directly proportional to square of drainage path and inversely proportional to time

Description : Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C ... to time (D) Directly proportional to square of drainage path and inversely proportional to time

Last Answer : Answer: Option B

The shear strength of a soil (A) Is directly proportional to the angle of internal friction of the soil (B) Is inversely proportional to the angle of internal friction of the soil (C) Decreases with increase in normal stress (D) Decreases with decrease in normal stress

Description : The shear strength of a soil (A) Is directly proportional to the angle of internal friction of the soil (B) Is inversely proportional to the angle of internal friction of the soil (C) Decreases with increase in normal stress (D) Decreases with decrease in normal stress

Last Answer : Answer: Option D

The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Description : The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Last Answer : Answer: Option B

The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2

Description : The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2

Last Answer : Answer: Option D

According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

The shear stress between the two liquid layers is __________ proportional to the distance between two layers(A) Directly (B) Inversely (C) Both A and B (D) None of these .

Description : The shear stress between the two liquid layers is __________ proportional to the distance between two layers. (A) Directly (B) Inversely (C) Both A and B (D) None of these

Last Answer : Answer: Option B

The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the surface (C) Directly proportional to the length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Description : The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the ... length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Last Answer : Answer: Option B