Vertical lines on pressure-enthalpy chart show constant (a) pressure lines (b) temperature lines (c) total heat lines (d) entropy lines

Vertical lines on pressure-enthalpy chart show constant (a) pressure lines (b) temperature lines (c) total heat lines (d) entropy lines
by

1 Answer

Answer :

Ans: c
by
selected by

Related questions

Short horizontal lines on pressure-enthalpy chart show (a) constant pressure lines (b) constant temperature lines (c) constant total heat lines (d) constant entropy lines

Description : Short horizontal lines on pressure-enthalpy chart show (a) constant pressure lines (b) constant temperature lines (c) constant total heat lines (d) constant entropy lines

Last Answer : Ans: a

On the pressure-enthalpy diagram, condensation and de-superheating is represented by a horizontal line because theprocess (a) takes place at constant pressure (b) takes place at constant temperature (c) takes place at constant entropy (d) takes place at constant enthalpy

Description : On the pressure-enthalpy diagram, condensation and de-superheating is represented by a horizontal line because theprocess (a) takes place at constant pressure (b) takes place at constant temperature (c) takes place at constant entropy (d) takes place at constant enthalpy

Last Answer : Ans: a

Which of the following statement is true? A. the chart is plotted for pressure equal to 760mm Hg B. the constant wbt line represents adiabatic saturation process C. the constant wbt line coincides with constant enthalpy line D. all of the mentioned

Description : Which of the following statement is true? A. the chart is plotted for pressure equal to 760mm Hg B. the constant wbt line represents adiabatic saturation process C. the constant wbt line coincides with constant enthalpy line D. all of the mentioned

Last Answer : ANSWER : D

The heat content of air is called the _____ of the air. a. Temperature b. Humidity c. Enthalpy d. Psychrometry e. Entropy

Description : The heat content of air is called the _____ of the air. a. Temperature b. Humidity c. Enthalpy d. Psychrometry e. Entropy

Last Answer : ANSWER : C

In psychrometric chart, dew point temperature lines are A. horizontal B. vertical C. curved D. straight lines slopping downwards to the right

Description : In psychrometric chart, dew point temperature lines are A. horizontal B. vertical C. curved D. straight lines slopping downwards to the right

Last Answer : ANSWER : A

Categorize point and path functions from following. (pressure, heat, internal energy, temperature, work, total enthalpy.)

Description : Categorize point and path functions from following. (pressure, heat, internal energy, temperature, work, total enthalpy.)

Last Answer : Point function-Pressure, temperature, internal energy, total enthalpy Path function-Heat, Work

In psychrometric chart, specific humidity lines are: A. vertical B. horizontal C. inclined D. curved lines

Description : In psychrometric chart, specific humidity lines are: A. vertical B. horizontal C. inclined D. curved lines

Last Answer : ANSWER : B

The dry-bulb temperature scale is read on a psychrometric chart along the: a. Left vertical axis b. Right vertical axis c. Saturation line and sloping downward to the right d. Top horizontal axis e. Horizontal axis on the bottom of the chart

Description : The dry-bulb temperature scale is read on a psychrometric chart along the: a. Left vertical axis b. Right vertical axis c. Saturation line and sloping downward to the right d. Top horizontal axis e. Horizontal axis on the bottom of the chart

Last Answer : ANSWER : E

Mollier chart is a __________ plot. (A) Pressure vs. enthalpy (B) Pressure vs. volume (C) Enthalpy vs. entropy (D) Temperature vs. entropy

Description : Mollier chart is a __________ plot. (A) Pressure vs. enthalpy (B) Pressure vs. volume (C) Enthalpy vs. entropy (D) Temperature vs. entropy

Last Answer : (C) Enthalpy vs. entropy

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Description : Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Last Answer : Answer : a

On psychrometric chart, wet bulb temperature lines are A. horizontal with uniformly spaced B. horizontal with non-uniformly spaced C. inclined with uniformly spaced D. inclined with non-uniformly spaced

Description : On psychrometric chart, wet bulb temperature lines are A. horizontal with uniformly spaced B. horizontal with non-uniformly spaced C. inclined with uniformly spaced D. inclined with non-uniformly spaced

Last Answer : ANSWER :C

The air standard Otto cycle comprises a two constant pressure processes and two constant volume processes b two constant pressure and two constant entropy processes c. two constant volume processes and two constant entropy processes d. none of the above.

Description : The air standard Otto cycle comprises a two constant pressure processes and two constant volume processes b two constant pressure and two constant entropy processes c. two constant volume processes and two constant entropy processes d. none of the above.

Last Answer : ANSWER (c) two constant volume processes and two constant entropy processes

Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Description : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Last Answer : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  (c) internal energy, enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Description : According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  ( ... , enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Last Answer : Answer : d

The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side

Description : The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side

Last Answer : Answer: B

Clapeyron equation is a relation between (a) temperature, pressure and enthalpy (b) specific volume and enthalpy (c) temperature and enthalpy (d) temperature, pressure, specific vapour and enthalpy.

Description : Clapeyron equation is a relation between (a) temperature, pressure and enthalpy (b) specific volume and enthalpy (c) temperature and enthalpy (d) temperature, pressure, specific vapour and enthalpy.

Last Answer : Ans: D

The moisture content lines in psychrometric chart are also called as A. relative humidity lines B. specific humidity lines C. both a. and b. D. none of the above

Description : The moisture content lines in psychrometric chart are also called as A. relative humidity lines B. specific humidity lines C. both a. and b. D. none of the above

Last Answer : ANSWER : B

What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant enthalpy, and constant entropy processes.

Description : What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant enthalpy, and constant entropy processes.

Last Answer : Isothermal, isochroic, isobaric, free expression, throttling and adiabatic processes respectively.

Specific __________ does not change during phase change at constant temperature and pressure. (A) Entropy (B) Gibbs energy (C) Internal energy (D) Enthalpy

Description : Specific __________ does not change during phase change at constant temperature and pressure. (A) Entropy (B) Gibbs energy (C) Internal energy (D) Enthalpy

Last Answer : (B) Gibbs energy

If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Last Answer : Answer : a

Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Last Answer : Answer : b

The coefficient of performance is the ratio of the refrigerant effect to the (a) heat of compression (b) work done by compressor (c) enthalpy increase in compressor (d) all of the above

Description : The coefficient of performance is the ratio of the refrigerant effect to the (a) heat of compression (b) work done by compressor (c) enthalpy increase in compressor (d) all of the above

Last Answer : Ans: d

In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Description : In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Last Answer : Heat supplied Q = m (h2-h1) …….(Steady flow energy equation for boiler) ; h2=3200 KJ/kg h1=2000 KJ/kg m = 10 Tons /hour = (10 x 1000)/3600 kg/sec = 2.77 Kg/sec Q = 2.77(3200-2000) = 3324 KJ/sec heat supplied for 10 Tons/hr steam generation

Which of the following is the other term used for enthalpy-entropy diagram?  a. Enthalpy diagram  b. Mollier diagram  c. Steam diagram  d. Entropy chart

Description : Which of the following is the other term used for enthalpy-entropy diagram?  a. Enthalpy diagram  b. Mollier diagram  c. Steam diagram  d. Entropy chart

Last Answer : Mollier diagram

The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Description : The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Last Answer : Ans: b

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Description : Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Last Answer : Some heat transfer occurs

At any point on the saturation curve in psychometric chart, the dry bulb temperature is always A. less than the corresponding wet bulb temperature B. more than the corresponding wet bulb temperature C. equal to the corresponding wet bulb temperature D. cannot predict

Description : At any point on the saturation curve in psychometric chart, the dry bulb temperature is always A. less than the corresponding wet bulb temperature B. more than the corresponding wet bulb temperature C. equal to the corresponding wet bulb temperature D. cannot predict

Last Answer : ANSWER : C

What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : enthalpy

Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Description : Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Last Answer : Answer : d

Isentropic process means a constant __________ process. (A) Enthalpy (B) Pressure (C) Entropy (D) None of these

Description : Isentropic process means a constant __________ process. (A) Enthalpy (B) Pressure (C) Entropy (D) None of these

Last Answer : (C) Entropy

Throttling (Joule-Thomson effect) process is a constant __________ process. (A) Enthalpy (B) Entropy (C) Pressure (D) None of these

Description : Throttling (Joule-Thomson effect) process is a constant __________ process. (A) Enthalpy (B) Entropy (C) Pressure (D) None of these

Last Answer : (A) Enthalpy

Superheating of steam is done at constant (A) Enthalpy (B) Entropy (C) Pressure (D) Volume

Description : Superheating of steam is done at constant (A) Enthalpy (B) Entropy (C) Pressure (D) Volume

Last Answer : Option C

During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Description : During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Last Answer : (A) Enthalpy remains constant

Joule-Thomson effect i.e., a throttling process is a constant __________ process. (A) Entropy (B) Temperature (C) Internal energy (D) Enthalpy

Description : Joule-Thomson effect i.e., a throttling process is a constant __________ process. (A) Entropy (B) Temperature (C) Internal energy (D) Enthalpy

Last Answer : (D) Enthalpy

If a solid is compressed adiabatically in its elastic range, its __________ remains constant (A) Internal energy (B) Enthalpy (C) Entropy (D) Temperature

Description : If a solid is compressed adiabatically in its elastic range, its __________ remains constant (A) Internal energy (B) Enthalpy (C) Entropy (D) Temperature

Last Answer : (C) Entropy

In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg

Humidification is the process of addition moisture in air at A. constant wet bulb temperature B. constant dry bulb temperature C. constant latent heat D. none of the above

Description : Humidification is the process of addition moisture in air at A. constant wet bulb temperature B. constant dry bulb temperature C. constant latent heat D. none of the above

Last Answer : ANSWER : B

Adiabatic compression is one in which A. Temperature during compression remains constant B. No heat leaves or enters the compressor cylinder during compression C. Temperature rise follows a linear relationship D. Work done is maximum.

Description : Adiabatic compression is one in which A. Temperature during compression remains constant B. No heat leaves or enters the compressor cylinder during compression C. Temperature rise follows a linear relationship D. Work done is maximum.

Last Answer : ANSWER : B

If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Description : If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Last Answer : Answer : d

Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Description : Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Last Answer : Ans : c

__________ decreases during adiabatic throttling of a perfect gas. (A) Entropy (B) Temperature (C) Enthalpy (D) Pressure

Description : __________ decreases during adiabatic throttling of a perfect gas. (A) Entropy (B) Temperature (C) Enthalpy (D) Pressure

Last Answer : (D) Pressure

For an incompressible fluid, the __________ is a function of both pressure as well as temperature. (A) Internal energy (B) Enthalpy (C) Entropy (D) All (A), (B) & (C)

Description : For an incompressible fluid, the __________ is a function of both pressure as well as temperature. (A) Internal energy (B) Enthalpy (C) Entropy (D) All (A), (B) & (C)

Last Answer : (B) Enthalpy

For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Description : For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Last Answer : (A) Temperature - entropy

Which of the following is the property of a system  (a) pressure and temperature  (b) internal energy  (c) volume and density  (d) enthalpy and entropy  (e) all of the above.

Description : Which of the following is the property of a system  (a) pressure and temperature  (b) internal energy  (c) volume and density  (d) enthalpy and entropy  (e) all of the above.

Last Answer : Answer : e

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

The horizontal line in psychrometric chart joining the change of state of air represents A. humidification B. sensible cooling or heating C. sensible cooling or heating with humidification D. sensible cooling or heating with dehumidification

Description : The horizontal line in psychrometric chart joining the change of state of air represents A. humidification B. sensible cooling or heating C. sensible cooling or heating with humidification D. sensible cooling or heating with dehumidification

Last Answer : ANSWER : B