increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain (c) Distortion (d) Instability

increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain   (c) Distortion (d) Instability
by

1 Answer

Answer :

Ans: A
by
selected by

Related questions

In lag compensator the damping ratio, gain and steady state error (ess) are

Description : In lag compensator the damping ratio, gain and steady state error (ess) are   (a) Decreases, Decreases and Increases (b) Decreases, Increases and Increases (c) Increases, Increases and Decreases (d) Increases, Decreases and Decreases

Last Answer : In lag compensator the damping ratio, gain and steady state error (ess) are Increases, Decreases and Decreases

State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Description : State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Last Answer : Condition for RC differentiator: If the time duration T of the input waveform is comparable with the RC time constant (product of R and C) then the output waveform of the differentiator gets distorted. Hence for proper differentiator the condition is as follows: T >>RC

Compare Integrator and differentiator.

Description : Compare Integrator and differentiator.

Last Answer : Sr. No. Integrator Differentiator 1 A circuit that gives an output voltage directly proportional to the integral of its input is known as an integrating circuit. A circuit that gives an output voltage directly ... is a low pass filter. It is a high pass filter. 5

Compare RC integrator with RC differentiator

Description : Compare RC integrator with RC differentiator

Last Answer : Compare RC integrator with RC differentiator

Which of the following is CORRECT with respect to a LAG-LEAD compensator ?

Description : Which of the following is CORRECT with respect to a LAG-LEAD compensator ? (A) It is similar to PI controller (B) It acts as Band-pass filter (C) It is Second-order system with one zero, and two poles (D) It acts as a Band-reject filter

Last Answer : Which of the following is CORRECT with respect to a LAG-LEAD compensator ? (A) It is similar to PI controller (B) It acts as Band-pass filter (C) It is Second-order system with one zero, and two poles (D) It acts as a Band-reject filter

Differentiate between positive and negative feedback on the basis of . (i) overall phase shift (ii) voltage gain (iii) stability (iv) applications

Description : Differentiate between positive and negative feedback on the basis of . (i) overall phase shift (ii) voltage gain (iii) stability (iv) applications 

Last Answer : Compare positive feedback and negative feedback on the basis of: (i) Gain (ii) Bandwidth (iii) Phase shift (iv) Stability

An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of

Description : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

Last Answer : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is 9.23

The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that...

Description : The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that of a lag compensator to be of the form (s+z2 ) / (s + p2 ). Then which of the following conditions must be satisfied?  ... (B) z1 > p1 and z2 < p2 (C) z1 < p1 and z2 < p2 (D) z1 < p1 and z2 > p2

Last Answer : A 

Possible phase relationships between voltage and current in an alternating current circuit include which of the following conditions? A. Current and voltage may be in phase. B. Current may lead the voltage. C. Current may lag the voltage. D. All of the above.

Description : Possible phase relationships between voltage and current in an alternating current circuit include which of the following conditions? A. Current and voltage may be in phase. B. Current may lead the voltage. C. Current may lag the voltage. D. All of the above.

Last Answer : Answer: D

This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation

Last Answer : C. Dynamic instability

Benefits of negative feedback include A. less distortion B. increased bandwidth C. low output resistance D. all of above

Description : Benefits of negative feedback include A. less distortion B. increased bandwidth C. low output resistance D. all of above

Last Answer : all of above

The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get

Description : The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased 

Last Answer : The effect of negative feedback on distortion and bandwidth is Distortion is reduced and bandwidth is increased

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

The effect of a finite gain of an operational amplifier used in an integrator is that

Description : The effect of a finite gain of an operational amplifier used in an integrator is that (A) it would not integrate (B) the slope of the output will vary with time (C) the final value of the output voltage will reduce (D) there will be instability in the circuit

Last Answer : The effect of a finite gain of an operational amplifier used in an integrator is that there will be instability in the circuit

Define Phase lag and phase lead?

Description : Define Phase lag and phase lead?

Last Answer : A negative phase angle is called phase lag. A positive phase angle is called phase lead.

A phase lag lead network introduces in the output?

Description : A phase lag lead network introduces in the output?

Last Answer : A phase lag lead network introduces in the output lag at low frequencies and lead at high frequencies.

At dead short circuit at terminals of Alternator then the current I is a) ZPF Lag b) ZPF lead c) Unity power factor d) 0.8 Power factor lag

Description : At dead short circuit at terminals of Alternator then the current I is a) ZPF Lag b) ZPF lead c) Unity power factor d) 0.8 Power factor lag

Last Answer : Ans: ZPF Lag

G(s) = (1+0.5s)/(1+s) find which type of net work it is a) Lead net work b) Lag net work c) Lag – Lead net work d) Lead – Lag net work

Description : G(s) = (1+0.5s)/(1+s) find which type of net work it is a) Lead net work b) Lag net work c) Lag – Lead net work d) Lead – Lag net work

Last Answer : Ans: Lag net work

A resistor placed in parallel to the output of a power supply _____________. A. is a temperature compensator B. corrects power factor C. prevents excessive currents D. aids in output voltage regulation

Description : A resistor placed in parallel to the output of a power supply _____________. A. is a temperature compensator B. corrects power factor C. prevents excessive currents D. aids in output voltage regulation

Last Answer : Answer: D

In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Description : In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Description : Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Description : The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Last Answer : (C) Decreases with increase of slope

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

Comment on the effect of negative feedback on the gain, input and output resistance of the feedback amplifiers.Describe the gain bandwidth product term used in this context and its importance.

Description : Comment on the effect of negative feedback on the gain, input and output resistance of the feedback amplifiers.Describe the gain bandwidth product term used in this context and its importance.

Last Answer : Effect of negative feedback: 1. Gain decreases with negative feedback. 2. Input resistance increases with negative feedback. 3. Output resistance decreases with negative feedback. Explanation ... feedback bandwidth increases which means it is stable output on more range of frequency.

An amplifier without feedback has a gain of 1000. The gain with a negative feedback of 0.009 is

Description : An amplifier without feedback has a gain of 1000. The gain with a negative feedback of 0.009 is  A) 10 B) 100 C) 125 D) 900

Last Answer : 100

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

With negative feedback, the system stability and system gain respectively

Description : With negative feedback, the system stability and system gain respectively (a) Increases and increases (b) Increases and decreases (c) Decreases and increases (d) Decreases and decreases

Last Answer : increases and decreasses

______increases the steady state accuracy.

Description : ______increases the steady state accuracy.

Last Answer : Integrator increases the steady state accuracy.

Attempting to parallel an AC generator which is out of phase with the bus will result in which of the following problems? A. The breaker should trip. B. The KVA will decrease. C. The synchronizing lamps will burn out. D. The power factor will be unitized.

Description : Attempting to parallel an AC generator which is out of phase with the bus will result in which of the following problems? A. The breaker should trip. B. The KVA will decrease. C. The synchronizing lamps will burn out. D. The power factor will be unitized.

Last Answer : Answer: A

Which of the following contributes to harmonics distortion in amplifiers? A) Positive feedback B) Presence of noise C) Defective active device D) Non linearity in active device.

Description : Which of the following contributes to harmonics distortion in amplifiers? A) Positive feedback B) Presence of noise C) Defective active device D) Non linearity in active device.

Last Answer : D) Non linearity in active device.

Which feedback increases the gain of the amplifier?

Description : Which feedback increases the gain of the amplifier?

Last Answer : Positive feedback

The phase lead compensation is used to a) Increase rise time and decrease overshoot b) Decrease both rise time and overshoot c) Increase both rise time and overshoot d) Decrease rise time and increase overshoot

Description : The phase lead compensation is used to a) Increase rise time and decrease overshoot b) Decrease both rise time and overshoot c) Increase both rise time and overshoot d) Decrease rise time and increase overshoot

Last Answer : Ans: Decrease rise time and increase overshoot

The major function of transistor. Q2 is A) It provides voltage gain B) It provides the feedback signal C) It isolates the oscillator from loading effects D) It provides a phase shift.

Description : The major function of transistor. Q2 is A) It provides voltage gain B) It provides the feedback signal C) It isolates the oscillator from loading effects D) It provides a phase shift.

Last Answer : ) It provides a phase shift.

What conditions are required for an amplifier to oscillate A) There must be feedback B) The feedback must be in phase C) The gain must be greater than the loss D) All the above are regd.

Description : What conditions are required for an amplifier to oscillate A) There must be feedback B) The feedback must be in phase C) The gain must be greater than the loss D) All the above are regd.

Last Answer : B) The feedback must be in phase

In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over...

Description : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is (a) - 125° (b) - 55° (c) 55° (d) 125°

Last Answer : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is 55°

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

Negative damping leads to a. instability b. fast convergence c. oscillations

Description : Negative damping leads to a. instability b. fast convergence c. oscillationsNegative damping leads to a. instability b. fast convergence c. oscillations

Last Answer : a. instability

Has there been a steady decrease in the height of Greenland in the 20th Century? (a) Yes. (b) No. (c) The height has increased and decreased due to changing wind patterns. (d) Yes, because of dramatic increases in the calving rate of glacial ice into the surrounding ocean.

Description : Has there been a steady decrease in the height of Greenland in the 20th Century? (a) Yes. (b) No. (c) The height has increased and decreased due to changing wind patterns. (d) Yes, because of dramatic increases in the calving rate of glacial ice into the surrounding ocean.

Last Answer : (b) No

In the illustrated amplifier, the RESET potentiometer A1R2 sets the stability of the control loop by changing the reset time constant. As the potentiometer is turned clockwise _________. EL-0060 A. the gain is increased B. the stability is increased by slowing the response time C. feedback is increased to the summing point at terminal 5 D. response time is increased decreasing stability

Description : In the illustrated amplifier, the RESET potentiometer A1R2 sets the stability of the control loop by changing the reset time constant. As the potentiometer is turned clockwise _________. EL-0060 A. ... is increased to the summing point at terminal 5 D. response time is increased decreasing stability

Last Answer : Answer: B

Basic operating characteristics of the operational amplifier such as gain and stability are the function of its _____________. A. differential input stage B. power output stage C. feedback circuit D. supply voltages

Description : Basic operating characteristics of the operational amplifier such as gain and stability are the function of its _____________. A. differential input stage B. power output stage C. feedback circuit D. supply voltages

Last Answer : Answer: C

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Lack of which hormone increases nerve and muscle instability and causes muscle spasm ?

Last Answer : Lack of hormones increases nerve and muscle instability and muscle cramps start.

Negative feedback in amplifiers – (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and in-creases noise (4) decreases bandwidth and increases noise

Description : Negative feedback in amplifiers – (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and in-creases noise (4) decreases bandwidth and increases noise

Last Answer : (1) increases bandwidth and decreases noise Explanation: Voltage gain, input impedance, output impedance, bandwidth etc. are few important characteristics of an amplifier. These parameters are more or ... be controlled. This can be conveniently achieved by employing a technique, called the feedback.

Negative feedback in amplifiers – (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and in-creases noise (4) decreases bandwidth and increases noise

Description : Negative feedback in amplifiers – (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and in-creases noise (4) decreases bandwidth and increases noise

Last Answer : (1) increases bandwidth and decreases noise Explanation: Voltage gain, input impedance, output impedance, bandwidth etc. are few important characteristics of an amplifier. These parameters are more or ... be controlled. This can be conveniently achieved by employing a technique, called the feedback.

Thyroid hormone: a. increases the absorption of carbohydrate from the intestine b. exerts a negative feedback action on TSH production c. increases the concentration of 2,3-DPG within the red blood cells d. all above

Description : Thyroid hormone: a. increases the absorption of carbohydrate from the intestine b. exerts a negative feedback action on TSH production c. increases the concentration of 2,3-DPG within the red blood cells d. all above

Last Answer : all above

Negative feedback in amplifiers (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and increases noise (4) decreases bandwidth and increases noise

Description : Negative feedback in amplifiers (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and increases noise (4) decreases bandwidth and increases noise

Last Answer :  increases bandwidth and decreases noise

The relative speed between the magnetic fields of stator and rotor under steady state operation is zero for a (A) dc machine. (B) 3 phase induction machine. (C) synchronous machine. (D) single phase induction machine.

Description : The relative speed between the magnetic fields of stator and rotor under steady state operation is zero for a (A) dc machine. (B) 3 phase induction machine. (C) synchronous machine. (D) single phase induction machine.

Last Answer : Ans: all options are correct

as the order increases, the width of a dark band in diffraction Patterns __________. A. Increases B. Decreases C. Does not change D. becomes infinity

Description : as the order increases, the width of a dark band in diffraction Patterns __________. A. Increases B. Decreases C. Does not change D. becomes infinity

Last Answer : Increases