For 100% modulation, total power is? a) same as the power of unmodulated signal b) twice as the power of unmodulated signal c) four times as the power of unmodulated signal d) one and half times as the power of unmodulated signal

 For 100% modulation, total power is? a) same as the power of unmodulated signal b) twice as the power of unmodulated signal c) four times as the power of unmodulated signal d) one and half times as the power of unmodulated signal  
by

1 Answer

Answer :

Ans: D
by
selected by

Related questions

A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated

In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Description : In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Last Answer : B. 0% modulation

At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25

Description : At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25

Last Answer : B. 71

For 100% modulation, power in each sideband is ________ of that of carrier? a) 50% b) 70% c) 60% d) 25%

Description : For 100% modulation, power in each sideband is ________ of that of carrier? a) 50% b) 70% c) 60% d) 25%

Last Answer : Ans: D

A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, is _____________. A. four times as great B. twice as much C. the same as the original resistance D. one-half of the original resistance

Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance

Last Answer : Answer: A

A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of the original wire C. the same as that of the original wire D. one-half that of the original wire

Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire

Last Answer : Answer: A

Which of the following expresses the relationship of the input and output frequencies in a full wave rectifier? A. The output frequency is the same as input frequency. B. The output frequency is one-half the input frequency. C. The output frequency is twice the input frequency. D. The output frequency is four times the input frequency.

Description : Which of the following expresses the relationship of the input and output frequencies in a full wave rectifier? A. The output frequency is the same as input frequency. B. The output frequency is ... frequency is twice the input frequency. D. The output frequency is four times the input frequency.

Last Answer : Answer: C

100% modulation in AM means a corresponding increase in total power by: A. 25% B. 75% C. 100% D. 50%

Description : 100% modulation in AM means a corresponding increase in total power by: A. 25% B. 75% C. 100% D. 50%

Last Answer : D. 50%

A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Description : A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Last Answer : D. 8.36 kW

If diameter of a shaft is doubled the power transmitted capacity will be a. Either twice or half b. Four times c. Eight times d. Same

Description : If diameter of a shaft is doubled the power transmitted capacity will be a. Either twice or half b. Four times c. Eight times d. Same

Last Answer : c. Eight times

An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W

Description : An AM transmitter is rated 100W at 100% modulation. How much power required for the carrier? A. 33.33 W B. 66.66 W C. 83.33 W D. 100 W

Last Answer : B. 66.66 W

A satellite of mass "M" is in orbit around the earth. If a second satellite of mass "2M" is to be placed in the same orbit, the second satellite must have a velocity which is: w) half the velocity of the first satellite x) the same as the velocity of the first satellite y) twice the velocity of the first satellite z) four times the velocity of the first satellite

Description : A satellite of mass "M" is in orbit around the earth. If a second satellite of mass "2M" is to be placed in the same orbit, the second satellite must have a velocity which is: w) half ... first satellite y) twice the velocity of the first satellite z) four times the velocity of the first satellite

Last Answer : ANSWER: X -- THE SAME AS THE VELOCITY OF THE FIRST SATELLITE 

In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Description : In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Last Answer : approximately four times the DC supply voltage

In amplitude modulation AM, if modulation index is more than 100% then:

Description : In amplitude modulation AM, if modulation index is more than 100% then: (1) Power of the wave increases. (2) Efficiency of transmission increases. (3) The wave gets distorted. (4) Bandwidth increases

Last Answer : In amplitude modulation AM, if modulation index is more than 100% then: The wave gets distorted.

If the distance between the earth and the sun were twice what it is now, the gravitational force exerted on the earth by the sun would be (a) twice as large as it is now (b) four times as large as it is now (c) half of what it is now (d) one-fourth of what it is now

Description : If the distance between the earth and the sun were twice what it is now, the gravitational force exerted on the earth by the sun would be (a) twice as large as it is now (b) four times as large as it is now (c) half of what it is now (d) one-fourth of what it is now

Last Answer : Ans:(d)

The compressive stress induced in a square key is, (A) Equal to shear stress (B) Four times of shear stress (C) Twice of shear stress (D) Half of shear stress

Description : The compressive stress induced in a square key is, (A) Equal to shear stress (B) Four times of shear stress (C) Twice of shear stress (D) Half of shear stress

Last Answer : (C) Twice of shear stress

Two negative point charges are 2 meters apart and repel each other with a force of 2 newtons. When the distance between the charges is doubled, the force between them is w) one fourth as great x) one half as great y) twice as great z) four times as great

Description : Two negative point charges are 2 meters apart and repel each other with a force of 2 newtons. When the distance between the charges is doubled, the force between them is w) one fourth as great x) one half as great y) twice as great z) four times as great

Last Answer : ANSWER: W -- ONE FOURTH AS GREAT

If the distance between the earth and moon were halved, the force of the attraction between them would be: w) one fourth as great x) one half as great y) twice as great z) four times as great

Description : If the distance between the earth and moon were halved, the force of the attraction between them would be: w) one fourth as great x) one half as great y) twice as great z) four times as great 

Last Answer : ANSWER: Z -- FOUR TIMES AS GREAT

Two shafts A and B are made of the same material. The diameter of the shaft A is twice as that of shaft B. The power transmitted by the shaft A will be ........... of shaft B. (a) twice (b) four times (c) eight times (d) sixteen times

Description : Two shafts A and B are made of the same material. The diameter of the shaft A is twice as that of shaft B. The power transmitted by the shaft A will be ........... of shaft B. (a) twice (b) four times (c) eight times (d) sixteen times

Last Answer : (c) eight times

The audio signals of TV are – (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Description : The audio signals of TV are – (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Last Answer : (2) Frequency modulated Explanation: In analogue television, the sound portion of a broadcast is invariably modulated separately from the video. Most commonly, the audio and video are combined at ... visual antennas can be used. In almost all cases, standard wideband frequency modulation is used.

The audio signals of TV are : (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Description : The audio signals of TV are : (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Last Answer : (2) Frequency modulated Explanation: In telecommunications and signal processing, frequency modulation (FM) conveys information over a carrier wave by varying its instantaneous frequency. This contrasts with ... , the sound portion of a broadcast is invariably modulated separately from the video.

The audio signals of TV are (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Description : The audio signals of TV are (1) Amplitude modulated (2) Frequency modulated (3) Unmodulated (4) Velocity modulated

Last Answer : Frequency modulated

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance as the primary windings. B. The secondary windings give off twice as much heat as the primary windings. C. The secondary windings require half as much current as the primary windings. D. The secondary windings have half as many turns as the primary windings.

Description : Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance ... primary windings. D. The secondary windings have half as many turns as the primary windings.

Last Answer : Answer: D

Relative to the secondary winding of a step-up transformer, the primary winding will have _____________. A. more turns B. fewer turns C. half as many turns D. twice as many turns

Description : Relative to the secondary winding of a step-up transformer, the primary winding will have _____________. A. more turns B. fewer turns C. half as many turns D. twice as many turns

Last Answer : Answer: B

Two shafts A and B are made of same material. The diameter of shaft A is twice that of B. The torque transmitted by shaft A will be (A) Twice that of B (B) Four times that of B (C) Eight times that of B (D) Sixteen times that of B

Description : Two shafts A and B are made of same material. The diameter of shaft A is twice that of B. The torque transmitted by shaft A will be (A) Twice that of B (B) Four times that of B (C) Eight times that of B (D) Sixteen times that of B

Last Answer : (C) Eight times that of B

A somatic cell that has just completed the S phase of its cell cycle, as compared to gamete of the same species, has (a) twice the number of chromosomes and four times the amount of DNA(b) four times the number of chromosomes and twice the amount of DNA (c) twice the number of chromosomes and twice the amount of DNA (d) same number of chromosomes but twice the amount of DNA

Description : A somatic cell that has just completed the S phase of its cell cycle, as compared to gamete of the same species, has (a) twice the number of chromosomes and four times the amount of DNA (b) ... of chromosomes and twice the amount of DNA (d) same number of chromosomes but twice the amount of DNA

Last Answer : (a) twice the number of chromosomes and four times the amount of DNA

A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) Same as that of A (B) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Description : A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) ... ) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Last Answer : (B) One fourth as that of A

owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Description : owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Last Answer : c) Three

If the previous year you reached 100% customer awareness in your company, this year what will you need to do to maintain this level? a. There is nothing to do. I have already reached as much awareness as I could. b. Spend the same amount of money spent the previous year to reach the same percentage of awareness this year. c. I would only need to create 33% new awareness to maintain 100% this year. d. I need to spend at least half of the money spent the previous year to reach 75% of the population. e. None of these.

Description : If the previous year you reached 100% customer awareness in your company, this year what will you need to do to maintain this level? a. There is nothing to do. I have already reached as much awareness ... half of the money spent the previous year to reach 75% of the population. e. None of these.

Last Answer : c. I would only need to create 33% new awareness to maintain 100% this year

What is a pulse-width modulation (PWM) signal in Arduino?

Description : What is a pulse-width modulation (PWM) signal in Arduino?

Last Answer : A PWM signal in Arduino is a digital signal that varies the width of the pulse to simulate an analog signal.

A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Last Answer : D. 1.66

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Description : Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Last Answer : A. Pulse modulation

Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Description : Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Last Answer : A. RF carrier

If the percentage modulation of an AM amplifier is 88% and the modulating signal is 1 volt, the carrier has an amplitude of _______________. A. 1.14 volts B. 0.88 volt C. 1.88 volts D. 0.12 volt

Description : If the percentage modulation of an AM amplifier is 88% and the modulating signal is 1 volt, the carrier has an amplitude of _______________. A. 1.14 volts B. 0.88 volt C. 1.88 volts D. 0.12 volt

Last Answer : A. 1.14 volts

Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Description : Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Last Answer : attenuation

In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Last Answer : reflection

An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Description : An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Last Answer : TDM-n

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Description : A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Last Answer : C. cross talk

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

Rate of change of a signal on a transmission medium after encoding and modulation have occurred

Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred

Last Answer : baud rate

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the

Description : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be (1) mƒ (2) 3mƒ (3) 9mƒ (4) 27mƒ

Last Answer : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be 3mƒ

The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -

Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -  a) 2 b) 5 c) 3 d) 4

Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5