The octal equivalence of 111010 is A) 81 B) 72 C) 71 D) None of above

The octal equivalence of 111010 is A) 81 B) 72 C) 71 D) None of above
by

1 Answer

Answer :

Answer : B
by
selected by

Related questions

The octal equivalence of 111010 is a. 81 b. 72 c. 71 d. None of above

Description : The octal equivalence of 111010 is a. 81 b. 72 c. 71 d. None of above

Last Answer : b. 72

The octal equivalence of 111010 is a. 81 b. 72 c. 71 d. None of above

Description : The octal equivalence of 111010 is a. 81 b. 72 c. 71 d. None of above

Last Answer : b. 72

The octal equivalent of 111010 is a. 81 b. 72 c. 71 d. None of above

Description : The octal equivalent of 111010 is a. 81 b. 72 c. 71 d. None of above

Last Answer : 72

The octal equivalent of 111010 is a. 81 b. 72 c. 71

Description : The octal equivalent of 111010 is a. 81 b. 72 c. 71

Last Answer : b. 72

The base of the octal system is 71) A) eight. B) two. C) ten. D) seven.

Description : The base of the octal system is 71) A) eight. B) two. C) ten. D) seven.

Last Answer : A) eight.

Germination percentage in sour orange rootstock is: a. 50-60% b. 61-70% c. 71-80% d. 81-90%

Description : Germination percentage in sour orange rootstock is: a. 50-60% b. 61-70% c. 71-80% d. 81-90%

Last Answer : 50-60%

In shewak's opinion, his weight is greater than 76 kg but less than 83 kg. His sister doest not agree with shewak and she thinks that shewak’s weight is greater than 71 kg but less than 81 kg. His father's view is that his weight cannot be greater than 79 kg. If all are them are correct in their estimation, what is the average of different probable weights of shewak? A) 67kg B) 68kg C) 72kg D) 78kg

Description : In shewak's opinion, his weight is greater than 76 kg but less than 83 kg. His sister doest not agree with shewak and she thinks that shewak's weight is greater than 71 kg but less than 81 kg. His ... , what is the average of different probable weights of shewak? A) 67kg B) 68kg C) 72kg D) 78kg

Last Answer :  Answer: D) Let shewak's weight be X kg. According to shewak , 76 < X < 83 According to shewak 's sister, 71 < X < 81. According to shewak 's father, X ≤ 79 The values satisfying all the above conditions are 77, 78and 79. Required average=[ (77+78+79)/3] = 201/ 3 = 78kg.

A vessel contains 100 litres of milk. From this, 10 litres of milk was taken out and replaced by water. The process was repeated further two times. How much milk is now contained by the vessel? a) 72.9 litres b) 60.4 litres c) 71.6 litres

Description : A vessel contains 100 litres of milk. From this, 10 litres of milk was taken out and replaced by water. The process was repeated further two times. How much milk is now contained by the vessel? a) 72.9 litres b) 60.4 litres c) 71.6 litres d) 81 litres e) None of these

Last Answer : Milk after three replacement =100 × (90/100)3 = 72.9 litres Answer: a)

Section -----------of companies act 1956 deals with the scheme of stock invest A. 69 to 70 B. 69 to 71 C. 69 to 72 D. 69 to 73

Description : Section -----------of companies act 1956 deals with the scheme of stock invest A. 69 to 70 B. 69 to 71 C. 69 to 72 D. 69 to 73

Last Answer : D. 69 to 73

A tap can fill a cistern in 11hours, but due to a leakage it took 13hours to fill the cistern. If the cistern is full, in what time will the cistern become empty due to leakage ? A) 73.30hrs B) 77.50hrs C) 71.5 hrs D) 72.30hrs E) None of these

Description : A tap can fill a cistern in 11hours, but due to a leakage it took 13hours to fill the cistern. If the cistern is full, in what time will the cistern become empty due to leakage ? A) 73.30hrs B) 77.50hrs C) 71.5 hrs D) 72.30hrs E) None of these

Last Answer : C 1/11-1/13 = 13-11/143 =>2/143 =>1/71.5 =>71.5hours

3 faucet A,B,C can fill a cistern from empty to full in 45mins, 35mins, and 25 mins respectively. When the cistern is empty all the 3 faucets are opened. A,B,c discharge chemical solutions A,B,C respectively. What is the proportion of solution C in the liquid in the tank after 5 mins? A) 63/143 B) 72/151 c) 67/173 D) 81/167

Description : 3 faucet A,B,C can fill a cistern from empty to full in 45mins, 35mins, and 25 mins respectively. When the cistern is empty all the 3 faucets are opened. A,B,c discharge chemical solutions A,B,C respectively. What is ... the liquid in the tank after 5 mins? A) 63/143 B) 72/151 c) 67/173 D) 81/167

Last Answer : A Part filled by (A+B+C) in 5 mins = 5(1/45 +1/35 + 1/25) = 5 (35+45+63/1575) = 143/315 Part filled by c in 5 mins = 5/25 = 1/5 Required ratio = 1/5 * 315/143 =63/143.

.Which one is used for compute the logical inference algorithm? a. Validity b.Satisfiability c. Logical equivalence d.All of these

Description : .Which one is used for compute the logical inference algorithm? a. Validity b.Satisfiability c. Logical equivalence d.All of these

Last Answer : d.All of these

Computers use the _____ number system to store data and perform calculations. 1) Decimal 2) Hexadecimal 3) Octal 4) Binary 5) None of these

Description : Computers use the _____ number system to store data and perform calculations. 1) Decimal 2) Hexadecimal 3) Octal 4) Binary 5) None of these

Last Answer : Answer :4

A number system that has eight different symbols to represent any quantity is known as A) Binary B) Octal C) Decimal D) Hexadecimal

Description : A number system that has eight different symbols to represent any quantity is known as A) Binary B) Octal C) Decimal D) Hexadecimal

Last Answer : Answer : B

ENIAC uses A) Decimal Numbering System B) Octal Numbering System C) Binary Numbering System D) Hexadecimal Numbering System

Description : ENIAC uses A) Decimal Numbering System B) Octal Numbering System C) Binary Numbering System D) Hexadecimal Numbering System

Last Answer : Answer : A

Which number system is usually followed in a typical 32-bit computer? A) Binary B) Decimal C) Hexadecimal D) Octal

Description : Which number system is usually followed in a typical 32-bit computer? A) Binary B) Decimal C) Hexadecimal D) Octal

Last Answer : Answer : A

The octal equivalent of 1100101.001010 is ______ a) 624.12 b) 145.12 c) 154.12 d) 145.21

Description : The octal equivalent of 1100101.001010 is ______ a) 624.12 b) 145.12 c) 154.12 d) 145.21

Last Answer : Answer: b Explanation: The octal equivalent is obtained by grouping the numbers into three, from right to left before decimal and from right to left after the decimal place. Here, i.e. 145.12 is the octal equivalent of the number

Which of the following is not a positional number system? a) Roman Number System b) Octal Number System c) Binary Number System d) Hexadecimal Number System

Description : Which of the following is not a positional number system? a) Roman Number System b) Octal Number System c) Binary Number System d) Hexadecimal Number System

Last Answer : Answer: a Explanation: The Roman number system isn’t a positional number system since , it uses symbols to represent numbers. The octal number system uses digits from 0-7 , the binary number system uses digits from 0-1 whereas, the hexadecimal number system uses digits from 0-15

Computer calculate number in ______mode: a) Octal b) Decimal c) Binary d) None of These

Description : Computer calculate number in ______mode: a) Octal b) Decimal c) Binary d) None of These

Last Answer : c) Binary

Which of the following number system is natively used by a computer: a) Hexadecimal b) Octal c) Decimal d) Binary e) None of These

Description : Which of the following number system is natively used by a computer: a) Hexadecimal b) Octal c) Decimal d) Binary e) None of These

Last Answer : d) Binary

Computers use the _____number system to store data and perform calculations: a) Binary b) Octal c) Decimal d) Hexadecimal e) None of The Above

Description : Computers use the _____number system to store data and perform calculations: a) Binary b) Octal c) Decimal d) Hexadecimal e) None of The Above

Last Answer : a) Binary

Computers use the ________ number system to store data and perform calculations. a) Binary b) Octal c) Decimald) Hexadecimal e) None of these

Description : Computers use the ________ number system to store data and perform calculations. a) Binary b) Octal c) Decimal d) Hexadecimal e) None of these

Last Answer : a) Binary

An octal number 237 is equal to the binary number 1) 010 011 111 2) 010 111 011 3) 011 101 101 4) 011 000 001

Description : An octal number 237 is equal to the binary number 1) 010 011 111 2) 010 111 011 3) 011 101 101 4) 011 000 001

Last Answer : 3) 011 101 101

Computers use the .... number system to store data and perform calculations. 1) binary 2) octal 3) decimal 4) hexadecimal

Description : Computers use the .... number system to store data and perform calculations. 1) binary 2) octal 3) decimal 4) hexadecimal

Last Answer : 1) binary

Show that the relation ‘≅’ congruence on the set of all triangles in Euclidean plane geometry is an equivalence relation. -Maths 9th

Description : Show that the relation ‘≅’ congruence on the set of all triangles in Euclidean plane geometry is an equivalence relation. -Maths 9th

Last Answer : Reflexive : A ≅ A True Symmetric : if A ≅ B then B ≅ A True Transitive : if A ≅ B and B ≅ C, then A ≅ C True Therefore, the relation ‘≅’ is an equivalence relation.

Write ‘yes’ if each of the following relations is an equivalence relation. -Maths 9th

Description : Write ‘yes’ if each of the following relations is an equivalence relation. -Maths 9th

Last Answer : (i) is parallel to' is reflexive, because any line is parallel to itself. Symmetric, because if line l is parallel to line m, then line m is parallel to line l. Transitive, because if l || m ... y cannot be a factor of x. (v) No, because the relation is reflexive and transitive but not symmetric.

If R is a relation in N × N defined by (a, b) R (c, d) if and only if ad = bc, show that R is an equivalence relation. -Maths 9th

Description : If R is a relation in N × N defined by (a, b) R (c, d) if and only if ad = bc, show that R is an equivalence relation. -Maths 9th

Last Answer : (i) R is reflexive. For all (a, b) ∈ N N we have (a, b) R (a, b) because ab = ba ⇒ R is reflexive. (ii) R is symmetric. Suppose (a, b) R (c, d) Then (a, b) R (c, d) ⇒ ... ) R (e, f) ⇒ R is transitive. Since R is reflexive, symmetric and transitive, therefore, R is an equivalence relation on N N.

Which of the following is an equivalence relation defined on set A = {1, 2, 3} -Maths 9th

Description : Which of the following is an equivalence relation defined on set A = {1, 2, 3} -Maths 9th

Last Answer : (c) {(1, 1), (2, 2), (3, 1), (1, 3), (3, 3)} Option (c) satisfies all the conditions of an equivalence relation. (1, 1), (2, 2), (3, 3) ∈ R ⇒ (a, a) ∈ R V a ∈ A ⇒ R is reflexive (3, 1) ∈ R and (1, 3) ∈ R ... R and (1, 1) ∈ R ⇒ (a, b) ∈ R, (b, c) ∈ R ⇒ (a, c) ∈ R V a, b, c ∈ A ⇒ R is transitive.

What is light equivalence ?

Description : What is light equivalence ?

Last Answer : If one of the two configurations having the same molecular and structural signal of the light active compound rotates clockwise on the surface of the polarized light and the other counterclockwise, they are called light isosceles and this is called light isosceles.

What is Electrochemical Equivalence ?

Description : What is Electrochemical Equivalence ?

Last Answer : One ampere conducts an electric current for one second, that is , one coulomb conducts an electric current.

Why Equivalent Mass Can Be Called Chemical Equivalence ?

Description : Why Equivalent Mass Can Be Called Chemical Equivalence ?

Last Answer : One ampere conducts an electric current for one second, that is , one coulomb conducts an electric current. On the other hand , the amount of matter stored in the electric gate ( ... in the electrode, like the electrochemical equivalent. So equivalent mass can be called chemical equilibrium.

What is equivalence ?

Description : What is equivalence ?

Last Answer : Equivalent Resistance: Using a single resistor instead of an insertion of a resistor, if there is no change in the current flow and voltage difference of the circuit , then that resistor is called a resistive resistor of that insertion.

What is zone of equivalence ?

Description : What is zone of equivalence ?

Last Answer : In this, ratio of antigen-antibody is seen optimal which results in large multimolecular lattice, hence maximum precipitation is observed.

For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Description : For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Last Answer : ANSWER (B) for both idling and peak power conditions

Which are needed to compute the logical inference algorithm? a) Logical equivalence b) Validity c) Satisfiability d) All of the mentioned

Description : Which are needed to compute the logical inference algorithm? a) Logical equivalence b) Validity c) Satisfiability d) All of the mentioned

Last Answer : d) All of the mentioned

The idea that irrespective of how a government chooses to increase spending, either by debt financing or tax financing, the outcome will be the same and demand will remain unchanged, is popularly known as: a) Ricardian theory of equivalence b) Ricardian theory of competitive advantage c) Ricardian theory of stability d) None of the above

Description : The idea that irrespective of how a government chooses to increase spending, either by debt financing or tax financing, the outcome will be the same and demand will remain unchanged, is popularly ... b) Ricardian theory of competitive advantage c) Ricardian theory of stability d) None of the above

Last Answer : a) Ricardian theory of equivalence David Ricardo was a British political economist and his most famous theory was that of comparative advantage (along with above theory of Ricardian ... nation should use its resources solely in industries where it has the most international competitiveness

Which of the following is true about White and Black Box Testing Technique:- a) Equivalance partitioning, Decision Table and Control flow are White box Testing Techniques. b) Equivalence partitioning , Boundary Value Analysis , Data Flow are Black Box Testing Techniques. c) Equivalence partitioning , State Transition , Use Case Testing are black box Testing Techniques. d) Equivalence Partioning , State Transition , Use Case Testing and Decision Table are White Box Testing Techniques.

Description : Which of the following is true about White and Black Box Testing Technique:- a) Equivalance partitioning, Decision Table and Control flow are White box Testing Techniques. b) Equivalence partitioning ... , State Transition , Use Case Testing and Decision Table are White Box Testing Techniques.

Last Answer : c) Equivalence partitioning , State Transition , Use Case Testing are black box Testing Techniques.

One of the fields on a form contains a text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value. a. CLASS b. cLASS c. CLass d. CLa01ss

Description : One of the fields on a form contains a text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value. a. CLASS b. cLASS c. CLass d. CLa01ss

Last Answer : d. CLa01ss

In a system designed to work out the tax to be paid:An employee has £4000 of salary tax free. The next £1500 is taxed at 10% the next £28000 is taxed at 22%. Any further amount is taxed at 40% Which of these groups of numbers would fall into the same equivalence class? a) £4800; £14000; £28000 b) £5200; £5500; £28000 c) £28001; £32000; £35000 d) £5800; £28000; £32000

Description : In a system designed to work out the tax to be paid:An employee has £4000 of salary tax free. The next £1500 is taxed at 10% the next £28000 is taxed at 22%. Any further amount is taxed at 40% ... ) £4800; £14000; £28000 b) £5200; £5500; £28000 c) £28001; £32000; £35000 d) £5800; £28000; £32000

Last Answer : d) £5800; £28000; £32000

Evaluating testability of the requirements and system are a part of which phase:- a) Test Analysis and Design b) Test Planning and control c) Test Implementation and execution d) Evaluating exit criteria and reporting Q4. One of the fields on a form contains a text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value.

Description : Evaluating testability of the requirements and system are a part of which phase:- a) Test Analysis and Design b) Test Planning and control c) Test Implementation and execution d) Evaluating ... text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value.

Last Answer : a) Test Analysis and Design

Which technique can be used to achieve input and output coverage? It can be applied to human input, input via interfaces to a system, or interface parameters in integration testing. A. Error Guessing B. Boundary Value Analysis C. Decision Table testing D. Equivalence partitioning

Description : Which technique can be used to achieve input and output coverage? It can be applied to human input, input via interfaces to a system, or interface parameters in integration testing. A. Error Guessing B. Boundary Value Analysis C. Decision Table testing D. Equivalence partitioning

Last Answer : D. Equivalence partitioning

When testing a grade calculation system, a tester determines that all scores from 90 to 100 will yield a grade of A, but scores below 90 will not. This analysis is known as: A. Equivalence partitioning B. Boundary value analysis C. Decision table D. Hybrid analysis

Description : When testing a grade calculation system, a tester determines that all scores from 90 to 100 will yield a grade of A, but scores below 90 will not. This analysis is known as: A. Equivalence partitioning B. Boundary value analysis C. Decision table D. Hybrid analysis

Last Answer : A. Equivalence partitioning

When testing a grade calculation system, a tester determines that all scores from 90 to 100 will yield a grade of A, but scores below 90 will not. This analysis is known as: A. Equivalence partitioning B. Boundary value analysis C. Decision table D. Hybrid analysis

Description : When testing a grade calculation system, a tester determines that all scores from 90 to 100 will yield a grade of A, but scores below 90 will not. This analysis is known as: A. Equivalence partitioning B. Boundary value analysis C. Decision table D. Hybrid analysis

Last Answer : B. Boundary value analysis

Given the following specification, which of the following values for age are in the SAME equivalence partition? If you are less than 18, you are too young to be insured. Between 18 and 30 inclusive, you will receive a 20% discount. Anyone over 30 is not eligible for a discount. A. 17, 18, 19. B. 29, 30, 31. C. 18, 29, 30. D. 17, 29, 31.

Description : Given the following specification, which of the following values for age are in the SAME equivalence partition? If you are less than 18, you are too young to be insured. Between 18 and 30 inclusive, you will receive a 20% discount. Anyone ... 17, 18, 19. B. 29, 30, 31. C. 18, 29, 30. D. 17, 29, 31.

Last Answer : C. 18, 29, 30.

f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence partitions? A. 15, 19 and 25 degrees B. 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Description : f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence ... 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Last Answer : A. 15, 19 and 25 degrees

A thermometer measures temperature in whole degrees only. If the temperature falls below 18 degrees, the heating is switched off. It is switched on again when the temperature reaches 21 degrees. What are the best values in degrees to cover all equivalence partitions? A. 15,19 and 25. B. 17,18 and19. C. 18, 20 and22. D. 16, 26 and 32.

Description : A thermometer measures temperature in whole degrees only. If the temperature falls below 18 degrees, the heating is switched off. It is switched on again when the temperature reaches 21 degrees. What are the best values in degrees to ... and 25. B. 17,18 and19. C. 18, 20 and22. D. 16, 26 and 32.

Last Answer : A. 15,19 and 25.

One of the fields on a form contains a text box which accepts alpha numeric values. Identify the Valid Equivalence class A. BOOK B. Book C. Boo01k D. book

Description : One of the fields on a form contains a text box which accepts alpha numeric values. Identify the Valid Equivalence class A. BOOK B. Book C. Boo01k D. book

Last Answer : C. Boo01k

Which technique can be used to achieve input and output coverage? It can be applied to human input, input via interfaces to a system, or interface parameters in integration testing. a) Error Guessing b) Boundary Value Analysis c) Decision Table testing d) Equivalence partitioning

Description : Which technique can be used to achieve input and output coverage? It can be applied to human input, input via interfaces to a system, or interface parameters in integration testing. a) Error Guessing b) Boundary Value Analysis c) Decision Table testing d) Equivalence partitioning

Last Answer : d) Equivalence partitioning

Find the Equivalence class for the following test case Enter a number to test the validity of being accepting the numbers between 1 and 99 A. All numbers < 1 B. All numbers > 99 C. Number = 0 D. All numbers between 1 and 99

Description : Find the Equivalence class for the following test case Enter a number to test the validity of being accepting the numbers between 1 and 99 A. All numbers < 1 B. All numbers > 99 C. Number = 0 D. All numbers between 1 and 99

Last Answer : D. All numbers between 1 and 99

Find the invalid equivalence class for the following test case Draw a line up to the length of 4 inches A. Line with 1 dot-width B. Curve C. Line with 4 inches D. None of the above

Description : Find the invalid equivalence class for the following test case Draw a line up to the length of 4 inches A. Line with 1 dot-width B. Curve C. Line with 4 inches D. None of the above

Last Answer : B. Curve